[ Upstream commit 0a919ae49223d32ac0e8be3494547fcd1e4aa0aa ] Move code calling spi_get_gpio_descs() to happen after ctlr->dev's name is set in order to have proper GPIO consumer names. Before: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |(null) CS1 ) out lo gpio-41 ( |(null) CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo After: cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio: gpio-6 ( |regulator-usb0-vbus ) out lo gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio: gpio-36 ( |scl ) in hi gpio-37 ( |sda ) in hi gpio-40 ( |spi0 CS1 ) out lo gpio-41 ( |spi0 CS0 ) out lo ACTIVE LOW gpio-42 ( |miso ) in hi gpio-43 ( |mosi ) in lo gpio-44 ( |sck ) out lo Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Chris Healy <cphealy@xxxxxxxxx> Cc: linux-spi@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/spi/spi.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 93986f879b09e..d17f68775a4bb 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2275,24 +2275,6 @@ int spi_register_controller(struct spi_controller *ctlr) if (status) return status; - if (!spi_controller_is_slave(ctlr)) { - if (ctlr->use_gpio_descriptors) { - status = spi_get_gpio_descs(ctlr); - if (status) - return status; - /* - * A controller using GPIO descriptors always - * supports SPI_CS_HIGH if need be. - */ - ctlr->mode_bits |= SPI_CS_HIGH; - } else { - /* Legacy code path for GPIOs from DT */ - status = of_spi_register_master(ctlr); - if (status) - return status; - } - } - /* even if it's just one always-selected device, there must * be at least one chipselect */ @@ -2349,6 +2331,25 @@ int spi_register_controller(struct spi_controller *ctlr) * registration fails if the bus ID is in use. */ dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num); + + if (!spi_controller_is_slave(ctlr)) { + if (ctlr->use_gpio_descriptors) { + status = spi_get_gpio_descs(ctlr); + if (status) + return status; + /* + * A controller using GPIO descriptors always + * supports SPI_CS_HIGH if need be. + */ + ctlr->mode_bits |= SPI_CS_HIGH; + } else { + /* Legacy code path for GPIOs from DT */ + status = of_spi_register_master(ctlr); + if (status) + return status; + } + } + status = device_add(&ctlr->dev); if (status < 0) { /* free bus id */ -- 2.20.1