[PATCH v2 4/4] ARM: dts: sun6i: Add default address and size cells for SPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SPI controller bindings require an address cell size of 1, and a size
cell size of 0. Let's put it at the DTSI level to make sure that's properly
enforced.

Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c04efad81bbc..a57cbf33c12f 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -987,6 +987,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi1: spi@1c69000 {
@@ -999,6 +1001,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi2: spi@1c6a000 {
@@ -1011,6 +1015,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi3: spi@1c6b000 {
@@ -1023,6 +1029,8 @@
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gic: interrupt-controller@1c81000 {
-- 
git-series 0.9.1



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux