Linux SPI

• Thread Index

• Re: [PATCH 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: spi-mem and gpio chipselects
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: spi-mem and gpio chipselects
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: spi-mem and gpio chipselects
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 0/3] HiSilicon v3xx SFC driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 1/3] mtd: spi-nor: hisi-sfc: Try to provide some clarity on which SFC we are
  • From: John Garry <john.garry@xxxxxxxxxx>
• Applied "spi: sifive: disable clk when probe fails and remove" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: sifive: disable clk when probe fails and remove
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-mem and gpio chipselects
  • From: Mark Brown <broonie@xxxxxxxxxx>
• spi-mem and gpio chipselects
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: sifive: disable clk when probe fails and remove
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] spi: cadence-quadpsi: cadence_qspi_init_timeout() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] spi: cadence-quadpsi: fix platform_get_irq.cocci warnings
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] spi: sifive: disable clk when probe fails and remove
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Applied "spi: add power control when set_cs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Drop GPIO header" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: txx9: Convert to use GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Drop GPIO header" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Remove runtime PM enable/disable from common part of the driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: dw: Remove runtime PM enable/disable from common part of the driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: dw: Remove runtime PM enable/disable from common part of the driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: dw: Remove runtime PM enable/disable from common part of the driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: dw: Remove runtime PM enable/disable from common part of the driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2] spi: add power control when set_cs
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH v2 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v2 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH V2] spi: add power control when set_cs
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH] spi: txx9: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: zynq-qspi: Drop GPIO header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: dw: Drop GPIO header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Comet Lake-H" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Comet Lake-H
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Applied "spi: sprd: adi: Set BIT_WDG_NEW bit when rebooting" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: adi: Add missing lock protection when rebooting" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: sprd: adi: Set BIT_WDG_NEW bit when rebooting
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 1/2] spi: sprd: adi: Add missing lock protection when rebooting
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Introduce temporary variables to increase readability" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• broonie-spi/for-next boot bisection: v5.4-rc4-82-ge025ec2b58a5 on jetson-tk1
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH] spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Applied "spi: xilinx: Add DT support for selecting transfer word width" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: xilinx: add description of new property xlnx,num-transfer-bits" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: add description of new property xlnx,num-transfer-bits
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: set bits_per_word based on controller's bits_per_word_mask
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• [PATCH] spi: xilinx: add description of new property xlnx,num-transfer-bits
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• [PATCH] Allowing Xilinx's AXI Quad widths different than 8 bits on userspace
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: luhua xu <luhua.xu@xxxxxxxxxxxx>
• Re: [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: luhua xu <luhua.xu@xxxxxxxxxxxx>
• Applied "spi: document CS setup, hold & inactive times in header" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Drop extra check of platform_get_resource() returned value" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fix spelling in the comments" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/1] Add spi power control when set cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/36] ARM: samsung platform cleanup
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 00/36] ARM: samsung platform cleanup
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/1] spi: mediatek: add power control when set_cs
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH 0/1] Add spi power control when set cs
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• Re: [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1] spi: Fix spelling in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] spi: document CS setup, hold & inactive times in header
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Applied "spi: dw: Move runtime PM enable/disable from common to platform driver part" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-pci: Add runtime power management support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-pci: Fix Chip Select amount on Intel Elkhart Lake PSE SPI" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: xilinx: Add DT support for selecting transfer word width
  • From: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: dw: Move runtime PM enable/disable from common to platform driver part
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH v1 1/2] spi: pxa2xx: Introduce temporary variables to increase readability
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] spi: pxa2xx: Drop extra check of platform_get_resource() returned value
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• broonie-spi/for-next boot bisection: v5.4-rc3-73-gc673f2d99c3d on jetson-tk1
  • From: "kernelci.org bot" <bot@xxxxxxxxxxxx>
• Applied "spi: rspi: Use platform_get_irq_byname_optional() for optional irqs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Fix CS high support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Convert pxa2xx_spi_get_port_id() to take struct device" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Remove useless private field" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Improve CS0 case support on AT91RM9200" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fix SPI_CS_HIGH setting when using native and GPIO CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Convert to use device_get_match_data()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Remove and fix erroneous comments" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Remove platform data support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: No need to keep pointer to platform device" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Sort headers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: fix handling of cs_change set on non-last xfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Improve and fix GPIO CS usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Configure GPIO per CS instead of by controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Replace of_device.h with mod_devicetable.h and of.h" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: atmel: fix handling of cs_change set on non-last xfer
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 3/3] spi: dw-pci: Fix Chip Select amount on Intel Elkhart Lake PSE SPI
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/3] spi: dw-pci: Add runtime power management support
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/3] spi: dw: Move runtime PM enable/disable from common to platform driver part
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 5/5] spi: pxa2xx: Replace of_device.h with mod_devicetable.h and of.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/5] spi: pxa2xx: No need to keep pointer to platform device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/5] spi: pxa2xx: Sort headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/5] spi: pxa2xx: Convert pxa2xx_spi_get_port_id() to take struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/5] spi: pxa2xx: Convert to use device_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add missed security checks
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 3/7] spi: atmel: Configure GPIO per CS instead of by controller
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 5/7] spi: atmel: Remove platform data support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 4/7] spi: atmel: Remove useless private field
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 2/7] spi: atmel: Fix CS high support
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 7/7] spi: atmel: Improve CS0 case support on AT91RM9200
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 6/7] spi: atmel: Improve and fix GPIO CS usage
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 1/7] spi: atmel: Remove and fix erroneous comments
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 0/7] atmel-spi: Allow using more than 4 GPIOs as CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v2 05/11] drm/tinydrm: Remove tinydrm_spi_max_transfer_size()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• [PATCH] spi: pxa2xx: Add missed security checks
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] spi: rspi: Use platform_get_irq_byname_optional() for optional irqs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Daniel Vetter <daniel.vetter@xxxxxxxx>
• Re: [PATCH v2 05/11] drm/tinydrm: Remove tinydrm_spi_max_transfer_size()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 05/11] drm/tinydrm: Remove tinydrm_spi_max_transfer_size()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2 05/11] drm/tinydrm: Remove tinydrm_spi_max_transfer_size()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH] spi: rspi: Use platform_get_irq_byname_optional() for optional irqs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: PCI: rcar: Add device tree support for r8a774b1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Applied "spi: spi-falcon: extend warning to `delay` as well" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-axi: extend support for the `delay` field" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: use new `delay` field for spi transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: implement SW control for CS times" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: change format for `spi_set_cs_timing()` function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: use `spi_transfer_delay_exec` helper" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-espi: convert transfer delay to `spi_delay` format" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: convert transfer word delay to spi_delay struct" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra20-sflash: use to new `spi_transfer_delay_exec`" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: orion: use new `word_delay` field for SPI transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: use new `word_delay` field for spi transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: make `cs_change_delay` the first user of the `spi_delay` logic" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: move `cs_change_delay` backwards compat logic outside switch" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-loopback-test: use new `delay` field" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm63xx: extend error condition to `delay` as well" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: use new `spi_transfer_delay_exec` helper where straightforward" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 04/19] spi: sprd: convert transfer word delay to spi_delay struct
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: spi: sh-msiof: Add r8a774b1 support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: spi: sh-msiof: Convert bindings to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: sh-msiof: Convert bindings to json-schema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: sh-msiof: Convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: sh-msiof: Convert bindings to json-schema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: sh-msiof: Convert bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Potential NULL pointer deference in spi
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Re: [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Potential NULL pointer deference in spi
  • From: Yizhuo Zhai <yzhai003@xxxxxxx>
• Re: [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 25/36] ARM: s3c: spi: avoid hardcoding fiq number in driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 16/36] ARM: s3c: move spi fiq handler into platform
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 13/36] ARM: s3c: move regs-spi.h into spi driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 11/36] ARM: s5pv210: split from plat-samsung
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 00/36] ARM: samsung platform cleanup
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Potential NULL pointer deference in spi
  • From: Eric Dumazet <eric.dumazet@xxxxxxxxx>
• Potential NULL pointer deference in spi
  • From: Yizhuo Zhai <yzhai003@xxxxxxx>
• Re: [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Jakub Kicinski <jakub.kicinski@xxxxxxxxxxxxx>
• Applied "spi: omap-100k: Remove set but not used variable 'dataH'" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: npcm: Remove set but not used variable 'val'" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 7/7] arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: renesas: r8a774b1: Add PCIe device nodes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] arm64: dts: renesas: r8a774b1: Add all MSIOF nodes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] arm64: dts: renesas: r8a774b1: Add RWDT node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 1/2] spi: omap-100k: Remove set but not used variable 'dataH'
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH v2 2/2] spi: npcm: Remove set but not used variable 'val'
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH v2 0/2] spi: Remove two set but not used variables
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Implement the PTP system timestamping for TCFQ mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add a PTP system timestamp to the transfer structure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: npcm: Remove set but not used variable 'val'
  • From: "zhengbin (A)" <zhengbin13@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: npcm: Remove set but not used variable 'val'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: omap-100k: Remove set but not used variable 'dataH'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 0/2] spi: Remove two set but not used variables
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 1/2] spi: omap-100k: Remove set but not used variable 'dataH'
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 2/2] spi: npcm: Remove set but not used variable 'val'
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [EXT] [PATCH] spi: spi-fsl-qspi: Clear TDH bits in FLSHCR register
  • From: Han Xu <han.xu@xxxxxxx>
• RE: [PATCH] spi: spi-fsl-qspi: Introduce variable to fix different invalid master Id
  • From: Han Xu <han.xu@xxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: gpio: Look for a device node instead of match" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: PCI: rcar: Add device tree support for r8a774b1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: spi: sh-msiof: Add r8a774b1 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: spi-fsl-qspi: Clear TDH bits in FLSHCR register
  • From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
• [PATCH 08/10] spi: gpio: Look for a device node instead of match
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 00/10] Stop NULLifying match pointer in of_match_device()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Applied "spi: stm32-qspi: Fix kernel oops when unbinding driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• spi: stm32-qspi: Fix kernel oops when unbinding driver
  • From: <patrice.chotard@xxxxxx>
• Re: [PATCH 3/7] dt-bindings: PCI: rcar: Add device tree support for r8a774b1
  • From: Andrew Murray <andrew.murray@xxxxxxx>
• Re: [PATCH 6/7] arm64: dts: renesas: r8a774b1: Add PCIe device nodes
  • From: Andrew Murray <andrew.murray@xxxxxxx>
• [PATCH 7/7] arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 6/7] arm64: dts: renesas: r8a774b1: Add PCIe device nodes
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 5/7] arm64: dts: renesas: r8a774b1: Add all MSIOF nodes
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 4/7] arm64: dts: renesas: r8a774b1: Add RWDT node
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 3/7] dt-bindings: PCI: rcar: Add device tree support for r8a774b1
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: spi: sh-msiof: Add r8a774b1 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 0/7] Add RZ/G2N MSIOF/RWDT/PCIEC support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: State of spidev from devicetree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [v2] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: State of spidev from devicetree
  • From: claus.stovgaard@xxxxxxxxx
• [PATCH] spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: gpio: prevent memory leak in spi_gpio_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-qspi: Introduce variable to fix different invalid master Id" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: lpspi: fix memory leak in fsl_lpspi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "SPI: designware: pci: Switch over to MSI interrupts" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt: spi: Add Renesas RZ/N1 binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Applied "spi: xtensa-xtfpga: Use devm_platform_ioremap_resource() in xtfpga_spi_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: clean up indentation issue" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Introduce dspi_slave_abort() function for NXP's dspi SPI driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: lantiq-ssc: Use devm_platform_ioremap_resource() in lantiq_ssc_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: snps,dw-apb-ssi: Add optional clock domain information" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt: spi: Add Renesas RZ/N1 binding documentation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Remove AVR32 leftover" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: hspi: Convert bindings to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mxic: Ensure width is respected in spi-mem operations" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: Use devm_platform_ioremap_resource() in mtk_spi_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: Use devm_platform_ioremap_resource() in mtk_spi_slave_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dt-bindings: Convert spi-sifive binding to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Add basic runtime PM support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: Avoid calling spi_slave_abort() with kfreed spidev
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH] spi: spi-fsl-qspi: Introduce variable to fix different invalid master Id
  • From: Kuldeep Singh <kuldeep.singh@xxxxxxx>
• [bug report] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] SPI: designware: pci: Switch over to MSI interrupts
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: spi: Add support for cadence-qspi IP Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: spi: Add support for cadence-qspi IP Intel LGM SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH v2] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• Re: [PATCH] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: lpspi: fix memory leak in fsl_lpspi_probe
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• [PATCH] spi: gpio: prevent memroy leak in spi_gpio_probe
  • From: Navid Emamdoost <navid.emamdoost@xxxxxxxxx>
• RE: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: State of spidev from devicetree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: fsl-lpspi: clean up indentation issue
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v4 02/19] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 06/19] spi: spidev: use new `word_delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 05/19] spi: orion: use new `word_delay` field for SPI transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 03/19] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 10/19] spi: tegra114: use `spi_transfer_delay_exec` helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 08/19] spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 12/19] spi: spi-loopback-test: use new `delay` field
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 13/19] spi: spidev: use new `delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 18/19] spi: bcm63xx: extend error condition to `delay` as well
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 17/19] spi: spi-falcon: extend warning to `delay` as well
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 16/19] spi: spi-fsl-espi: convert transfer delay to `spi_delay` format
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 15/19] spi: implement SW control for CS times
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 19/19] spi: spi-axi: extend support for the `delay` field
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 14/19] spi: tegra114: change format for `spi_set_cs_timing()` function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 11/19] spi: tegra20-sflash: use to new `spi_transfer_delay_exec`
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 09/19] spi: use new `spi_transfer_delay_exec` helper where straightforward
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 07/19] spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 04/19] spi: sprd: convert transfer word delay to spi_delay struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 01/19] spi: move `cs_change_delay` backwards compat logic outside switch
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 00/19] spi: introduce `struct spi_delay` data-type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: spi: sh-msiof: Convert bindings to json-schema
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• re: spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Applied "spi: Add call to spi_slave_abort() function when spidev driver is released" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
• [PATCH] spi: orion: fix runtime PM initialization
  • From: <tomaspaukrt@xxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 2/2] spi: Introduce dspi_slave_abort() function for NXP's dspi SPI driver
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH v2 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH v2 0/2] spi: Fix problem with interrupted slave transmission
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [spi:for-5.4 98/98] ERROR: "spi_slave_abort" [drivers/spi/spidev.ko] undefined!
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [spi:for-5.4 98/98] spidev.c:undefined reference to `spi_slave_abort'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Applied "spi: Add call to spi_slave_abort() function when spidev driver is released" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: State of spidev from devicetree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [no subject]
  • From: Claus Stovgaard <claus.stovgaard@xxxxxxxxx>
• [PATCH 2/2] spi: Introduce dspi_slave_abort() function for NXP's dspi SPI driver
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH 1/2] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH 0/2] spi: Fix problem with interrupted slave transmission
  • From: Lukasz Majewski <lukma@xxxxxxx>
• RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.2 005/185] spi: dw-mmio: Clock should be shut when error occurs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 177/203] spi: bcm2835: Work around DONE bit erratum
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 007/203] spi: dw-mmio: Clock should be shut when error occurs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] spi: xtensa-xtfpga: Use devm_platform_ioremap_resource() in xtfpga_spi_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: mediatek: Use devm_platform_ioremap_resource() in mtk_spi_slave_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: mediatek: Use devm_platform_ioremap_resource() in mtk_spi_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH] spi: lantiq-ssc: Use devm_platform_ioremap_resource() in lantiq_ssc_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: mxic: Fix DMAS_CTRL register layout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mxic: Select SPI_NOR type by default" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/4] spi: mxic: Fix transmit path
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: fix crash when num-chipselects is 0
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/4] spi: mxic: Fix DMAS_CTRL register layout
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 3/4] spi: mxic: Select SPI_NOR type by default
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 2/4] spi: mxic: Ensure width is respected in spi-mem operations
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/4] spi: mxic: Fix transmit path
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Remove AVR32 leftover
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Remove AVR32 leftover
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: atmel: Remove AVR32 leftover
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH] spi: atmel: Fix crash when using more than 4 gpio CS
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] spi: dw: Add basic runtime PM support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2 0/4] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Re: [PATCH v2 0/4] spi: dw: Add basic runtime PM support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH] spi: spi-gpio: fix crash when num-chipselects is 0
  • From: DENG Qingfang <dqfext@xxxxxxxxx>
• Re: [PATCH v2] spi: dt-bindings: Convert spi-sifive binding to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: dt-bindings: Convert spi-sifive binding to json-schema
  • From: Pragnesh Patel <pragnesh.patel@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 4/4] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH v2 3/4] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: snps,dw-apb-ssi: Add optional clock domain information
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH v2 1/4] dt: spi: Add Renesas RZ/N1 binding documentation
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH v2 0/4] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Aurabindo Jayamohanan <mail@xxxxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Aurabindo Jayamohanan <mail@xxxxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Aurabindo Jayamohanan <mail@xxxxxxxxxxxx>
• RE: [PATCH 2/3] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Aurabindo Jayamohanan <mail@xxxxxxxxxxxx>
• [PATCH] spi: sifive: check return value for platform_get_resource()
  • From: Aurabindo Jayamohanan <mail@xxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: dw: Add basic runtime PM support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] SPI updates for v5.4
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• RE: [PATCH 2/3] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Re: [PATCH 2/3] spi: dw: Add basic runtime PM support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH] dt-bindings: hspi: Convert bindings to json-schema
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v1 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: spi: Add support for cadence-qspi IP Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v1 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] spi: cadence-qspi: Add QSPI support for Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: spi: Add support for cadence-qspi IP Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 0/2] spi: cadence-qspi: Add cadence-qspi support for Intel LGM SoC
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 3/3] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 1/3] spi: move `cs_change_delay` backwards compat logic outside switch
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 2/3] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 0/3] spi: introduce `struct spi_delay` data-type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [GIT PULL] SPI updates for v5.4
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 00/15] Unify SPI delays into an `struct spi_delay`
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: hspi: Convert bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] spi: dt-bindings: Convert spi-sifive binding to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: hspi: Convert bindings to json-schema
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• [PATCH 3/3] spi: dw: Add compatible string for Renesas RZ/N1 SPI Controller
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH 2/3] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH 1/3] dt: spi: Add Renesas RZ/N1 binding documentation
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH 0/3] spi: dw: Add basic runtime PM support
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• Re: [PATCH] spi: spi-synquacer: fix set_cs handling
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 4/4] iio: imu: adis: convert cs_change_delay to spi_delay struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/4] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/4] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 0/4] spi: introduce `struct spi_delay` data-type
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/4] spi: move `cs_change_delay` backwards compat logic outside switch
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 10/15] spi: use new `spi_transfer_delay` helper where straightforward
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 15/15] spi: implement SW control for CS times
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 14/15] spi: tegra114: change format for `spi_set_cs_timing()` function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 13/15] spi: spidev: use new `delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 12/15] spi: spi-loopback-test: use new `delay` field
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 09/15] spi: introduce `delay` field for `spi_transfer` + spi_transfer_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 11/15] spi: tegra114: use `spi_transfer_delay` helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 06/15] spi: orion: use new `word_delay` field for SPI transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 07/15] spi: spidev: use new `word_delay` field for spi transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 04/15] iio: imu: adis: convert cs_change_delay to spi_delay struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 00/15] Unify SPI delays into an `struct spi_delay`
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 08/15] spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 05/15] spi: sprd: convert transfer word delay to spi_delay struct
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 02/15] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 01/15] spi: move `cs_change_delay` backwards compat logic outside switch
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Applied "spi: Guarantee cacheline alignment of driver-private data" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 00/10] Speed up SPI simplex transfers on Raspberry Pi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 04/10] spi: bcm2835: Work around DONE bit erratum
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 00/10] Speed up SPI simplex transfers on Raspberry Pi
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 04/10] spi: bcm2835: Work around DONE bit erratum
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 10/10] spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 09/10] dmaengine: bcm2835: Avoid accessing memory when copying zeroes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 08/10] dmaengine: bcm2835: Document struct bcm2835_dmadev
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 07/10] spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 06/10] spi: bcm2835: Cache CS register value for ->prepare_message()
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 05/10] spi: bcm2835: Drop dma_pending flag
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 00/10] Speed up SPI simplex transfers on Raspberry Pi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 04/10] spi: bcm2835: Work around DONE bit erratum
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 03/10] spi: Guarantee cacheline alignment of driver-private data
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 01/10] dmaengine: bcm2835: Allow reusable descriptors
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 02/10] dmaengine: bcm2835: Allow cyclic transactions without interrupt
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 00/10] Speed up SPI simplex transfers on Raspberry Pi
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 3/3] spi: mediatek: support large PA
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/3] MT6765 spi support
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 03/10] spi: Guarantee cacheline alignment of driver-private data
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] gpiolib: of: fix fallback quirks handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: dt-bindings: Convert spi-sifive binding to json-schema
  • From: Pragnesh Patel <pragnesh.patel@xxxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Deterministic SPI latency with NXP DSPI driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 4.4 17/23] spi: bcm2835aux: ensure interrupts are enabled for shared handler
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 18/26] spi: bcm2835aux: ensure interrupts are enabled for shared handler
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Andi Shyti <andi@xxxxxxxxxxx>
• [PATCH] spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• RE: [RFC] Is runtime_pm in the RSPI driver broken?
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [RFC] Is runtime_pm in the RSPI driver broken?
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH -next 06/36] spi: bcm2835: use devm_platform_ioremap_resource() to simplify code
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH -next 05/36] spi: bcm2835aux: use devm_platform_ioremap_resource() to simplify code
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Applied "spi: npcm-fiu: remove set but not used variable 'retlen'" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFC] Is runtime_pm in the RSPI driver broken?
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH -next] spi: npcm-fiu: remove set but not used variable 'retlen'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH -next 34/36] spi: zynqmp: use devm_platform_ioremap_resource() to simplify code
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH -next 35/36] spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 0/4] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 2/4] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 3/4] spi: spi-fsl-dspi: Implement the PTP system timestamping for TCFQ mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 4/4] spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 1/4] spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH -next 26/36] spi: sifive: use devm_platform_ioremap_resource() to simplify code
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• Re: [PATCH -next 07/36] spi: bcm63xx-hsspi: use devm_platform_ioremap_resource() to simplify code
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH -next 23/36] spi: spi-qcom-qspi: use devm_platform_ioremap_resource() to simplify code
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH -next 13/36] spi: spi-geni-qcom: use devm_platform_ioremap_resource() to simplify code
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH -next 16/36] spi: spi-meson-spifc: use devm_platform_ioremap_resource() to simplify code
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH -next 15/36] spi: meson-spicc: use devm_platform_ioremap_resource() to simplify code
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH -next 11/36] spi: coldfire-qspi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 21/36] spi: oc-tiny: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 19/36] spi: npcm: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 23/36] spi: spi-qcom-qspi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 29/36] spi: sun4i: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 35/36] spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 36/36] spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 34/36] spi: zynqmp: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 31/36] spi: tegra: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 33/36] spi: xlp: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 32/36] spi: uniphier: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 30/36] spi: sun6i: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 27/36] spi: sirf: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 28/36] spi: st-ssc4: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 26/36] spi: sifive: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 25/36] spi: s3c24xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 24/36] spi: rb4xx: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 22/36] spi: pic32-sqi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 20/36] spi: nuc900: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 18/36] spi: mxs: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 17/36] spi: mt7621: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 16/36] spi: spi-meson-spifc: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 15/36] spi: meson-spicc: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 14/36] spi: lp-8841: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 13/36] spi: spi-geni-qcom: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 12/36] spi: dw-mmio: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 10/36] spi: clps711x: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 08/36] spi: cadence: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 09/36] spi: octeon: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 07/36] spi: bcm63xx-hsspi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 05/36] spi: bcm2835aux: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 06/36] spi: bcm2835: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 04/36] spi: spi-axi: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 03/36] spi: ath79: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 02/36] spi: a3700: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 01/36] spi: altera: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH -next 00/36] use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] gpiolib: of: fix fallback quirks handling
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] gpiolib: of: fix fallback quirks handling
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Applied "spi: npcm-fiu: fix spelling mistake "frequancy" -> "frequency"" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 074/167] spi: spi-gpio: fix SPI_CS_HIGH capability
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH][spi-next] spi: npcm-fiu: fix spelling mistake "frequancy" -> "frequency"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix race condition in TCFQ/EOQ interrupt" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: remove unnecessary code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: introduce polling mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: fix wrong register overwrite" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-fsl-dspi: Fix race condition in TCFQ/EOQ interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] spi: spi-synquacer: fix set_cs handling
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH 1/3] spi: uniphier: fix wrong register overwrite
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 3/3] spi: uniphier: introduce polling mode
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 2/3] spi: uniphier: remove unnecessary code
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 0/3] spi: uniphier: introduce polling mode and fix bug
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• Applied "spi: ep93xx: Repair SPI CS lookup tables" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: ep93xx: Repair SPI CS lookup tables
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH] spi: ep93xx: Repair SPI CS lookup tables
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RT and PTP system timestamping
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] spi: ep93xx: Repair SPI CS lookup tables
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Applied "spi: npcm-fiu: add NPCM FIU controller driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-binding: spi: add NPCM FIU controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-pci: Add MODULE_DEVICE_TABLE" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm-qspi: Make BSPI default mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH V2 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH V3 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH] spi: dw-pci: Add MODULE_DEVICE_TABLE
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 0/2] spi: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 1/2] dt-binding: spi: add NPCM FIU controller
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: bcm2835: Convert to use CS GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl: Convert to use CS GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Ashish Kumar <ashish.kumar@xxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 2/5] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Ashish Kumar <ashish.kumar@xxxxxxx>
• Re: [PATCH 2/3] arm64: dts: ls1088a: Add the DSPI controller node
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 2/5] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Remove impossible to reach error check" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>