Linux SPI

• Thread Index

• Re: [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 07/16] dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 15/16] ARM: at91/defconfig: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 14/16] dt-bindings: arm: add sam9x60-ek board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 12/16] dt-bindings: spi_atmel: add microchip,sam9x60-spi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 11/16] dt-bindings: atmel,at91rm9200-rtc: add microchip,sam9x60-rtc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 10/16] dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 08/16] dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 06/16] dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 02/16] dt-bindings: atmel-can: add microchip,sam9x60-can
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 05/16] dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 04/16] dt-bindings: atmel-isi: add microchip,sam9x60-isi
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 03/16] dt-bindings: atmel-tcb: add microchip,<chip>-tcb
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  • From: Clément Péron <peron.clem@xxxxxxxxx>
• [PATCH 2/2] arm64: dts: allwinner: h6: Pine H64: Add SPI flash node
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH 0/2] arm64: dts: sun50i: H6: Enable SPI flash
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH] spi: sh-msiof: Do not redefine STR while compile testing
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH] spi: sh-msiof: Do not redefine STR while compile testing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: sh-msiof: Do not redefine STR while compile testing
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [EXT] [PATCH] spi: nxp-fspi: Ensure width is respected in spi-mem operations
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [EXT] [PATCH] spi: nxp-fspi: Ensure width is respected in spi-mem operations
  • From: Kuldeep Singh <kuldeep.singh@xxxxxxx>
• [PATCH v1 1/1] spi: bcm-qspi: Use platform_get_irq_byname_optional() to avoid error message
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: Multiplex SPI Chip Selects
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Multiplex SPI Chip Selects
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] spi fixes for v5.5
  • From: pr-tracker-bot@xxxxxxxxxx
• Applied "spi: dw: use "smp_mb()" to avoid sending spi data error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Multiplex SPI Chip Selects
  • From: Anthony DeRosa <anthony.derosa@xxxxxxxxxxxx>
• [GIT PULL] spi fixes for v5.5
  • From: Mark Brown <broonie@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: Multiplex SPI Chip Selects
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
• Re: [PATCH] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: kongxinwei <kong.kongxinwei@xxxxxxxxxxxxx>
• Applied "spi: Document Octal mode as valid SPI bus width" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 3/6] spi: rspi: Use dev_warn_once() instead of open-coding
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/6] spi: rspi: Add support for multiple native chip selects
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/6] spi: rspi: Remove set_config_register() macro
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/6] spi: Add generic support for unused native cs with cs-gpios
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/6] spi: rspi: Add support for multiple native and GPIO chip selects
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/6] spi: sh-msiof: Convert to generic unused native cs handling.
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 6/6] spi: rspi: Add support for GPIO chip selects
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: Document Octal mode as valid SPI bus width
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Applied "spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v6 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v6 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH spi] spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: kongxinwei <kong.kongxinwei@xxxxxxxxxxxxx>
• Applied "spi: Catch improper use of PTP system timestamping API" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 10/38] spi: spi-cavium-thunderx: Add missing pci_release_regions()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 16/57] spi: spi-cavium-thunderx: Add missing pci_release_regions()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 004/187] spi: cadence: Correct handling of native chipselect
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 009/187] spi: dw: Correct handling of native chipselect
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 012/187] spi: fsl: Handle the single hardwired chipselect case
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 051/187] spi: spi-cavium-thunderx: Add missing pci_release_regions()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 076/187] spi: spi-ti-qspi: Fix a bug when accessing non default CS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 125/187] spi: nxp-fspi: Ensure width is respected in spi-mem operations
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 35/84] spi: spi-ti-qspi: Fix a bug when accessing non default CS
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 27/84] spi: spi-cavium-thunderx: Add missing pci_release_regions()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 010/187] spi: fsl: Fix GPIO descriptor support
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 002/187] spi: pxa2xx: Add support for Intel Jasper Lake
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH spi] spi: Catch improper use of PTP system timestamping API
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi] spi: Don't look at TX buffer for PTP system timestamping
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi: oc-tiny: Use GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: dw: use "smp_mb()" to avoid sending spi data error
  • From: Xinwei Kong <kong.kongxinwei@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v5 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] spi: uniphier: Add SPI_LOOP to the capabilities
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• Applied "spi: uniphier: Add DMA transfer mode support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: use true,false for bool variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: use true,false for bool variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: use true,false for bool variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/5] spi: uniphier: Add SPI_LOOP to the capabilities
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Applied "spi: uniphier: Fix FIFO threshold" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: Add handle_err callback function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: Change argument of irq functions to private structure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] spi: fsl-lpspi: use true,false for bool variable
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 2/3] spi: imx: use true,false for bool variable
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 3/3] spi: tegra114: use true,false for bool variable
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 0/3] spi: use true,false for bool variable
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH 1/5] spi: uniphier: Fix FIFO threshold
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• [PATCH 3/5] spi: uniphier: Add handle_err callback function
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• [PATCH 5/5] spi: uniphier: Add DMA transfer mode support
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• [PATCH 4/5] spi: uniphier: Add SPI_LOOP to the capabilities
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• [PATCH 2/5] spi: uniphier: Change argument of irq functions to private structure
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• [PATCH 0/5] spi: uniphier: Introduce DMA transfer mode
  • From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
• Re: [PATCH v17 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v4 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v4 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] spi: spi-ti-qspi: support large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] spi: spi-ti-qspi: Support large NOR SPI flash
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• RE: [PATCH v2 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] spi: spi-ti-qspi: support large flash devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: spi-ti-qspi: Support large NOR SPI flash
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: masonccyang@xxxxxxxxxxx
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Applied "dt-bindings: spi: Convert stm32 spi bindings to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: spi: Convert stm32 spi bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] SPI fixes for v5.5
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: spi-ti-qspi: Remove unused macro for fclk frequency" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: spi-ti-qspi: Support large NOR SPI flash
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [GIT PULL] SPI fixes for v5.5
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/1] spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/1] spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] dt-bindings: spi: Convert stm32 spi bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH v3 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH v2 1/1] spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• [PATCH v2 0/1] spi: bcm2835: no dev_err() on clk_get() -EPROBE_DEFER
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: Convert stm32 spi bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/3] HiSilicon v3xx SFC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/3] HiSilicon v3xx SFC driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Applied "spi: sirf: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: nxp-fspi: Ensure width is respected in spi-mem operations" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl: use platform_get_irq() instead of of_irq_to_resource()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: Release the DMA channel if probe fails after dma_init" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mxs: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: img-spfi: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: meson-spicc: Use GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/9] spi: bcm2835: Release the DMA channel if probe fails after dma_init
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: meson-spicc: Use GPIO descriptors
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] spi: meson-spicc: Use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: don't print error on clk_get() DEFER
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Andreas Färber <afaerber@xxxxxxx>
• RE: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Andreas Färber <afaerber@xxxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH 4/9] spi: img-spfi: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 9/9] spi: stm32: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 8/9] spi: stm32-qspi: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 7/9] spi: spi-fsl-dspi: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 6/9] spi: sirf: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/9] spi: mxs: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/9] spi: bcm2835: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/9] spi: bcm2835: Release the DMA channel if probe fails after dma_init
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/9] spi: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/9] spi: atmel: Use dma_request_chan() instead dma_request_slave_channel()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC 04/25] spi: gpio: Implement LSB First bitbang support
  • From: Andreas Färber <afaerber@xxxxxxx>
• [RFC 00/25] arm64: realtek: Add Xnano X5 and implement TM1628/FD628/AiP1618 LED controllers
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH] spi: nxp-fspi: Ensure width is respected in spi-mem operations
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 3/3] spi: spi-ti-qspi: optimize byte-transfers
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 2/3] spi: spi-ti-qspi: support large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 1/3] spi: spi-ti-qspi: Remove unused macro for fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 0/3] spi: spi-ti-qspi: Support large NOR SPI flash
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: spi-ti-qspi: Fix a bug when accessing non default CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Avoid BUG_ON() in case of host failure" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: Remove obsolete platform_device_id entries" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: spi-ti-qspi: Fix a bug when accessing non default CS
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• RE: [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH] spi: rspi: Remove obsolete platform_device_id entries
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] memory: add Renesas RPC-IF driver
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: masonccyang@xxxxxxxxxxx
• [PATCH AUTOSEL 4.9 49/91] spi: img-spfi: fix potential double release
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 68/91] spi: pxa2xx: Add missed security checks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 77/91] spi: tegra20-slink: add missed clk_unprepare
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 81/91] spi: st-ssc4: add missed pm_runtime_disable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 04/71] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 38/71] spi: img-spfi: fix potential double release
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 55/71] spi: pxa2xx: Add missed security checks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 62/71] spi: tegra20-slink: add missed clk_unprepare
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/91] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 005/130] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 079/130] spi: img-spfi: fix potential double release
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 102/130] spi: pxa2xx: Add missed security checks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 112/130] spi: tegra20-slink: add missed clk_unprepare
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 117/130] spi: st-ssc4: add missed pm_runtime_disable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 007/177] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 080/177] spi: sprd: adi: Add missing lock protection when rebooting
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 105/177] spi: img-spfi: fix potential double release
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 135/177] spi: pxa2xx: Add missed security checks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 152/177] spi: tegra20-slink: add missed clk_unprepare
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 159/177] spi: st-ssc4: add missed pm_runtime_disable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 128/350] spi: pxa2xx: Set controller->max_transfer_size in dma mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 168/350] spi: sprd: adi: Add missing lock protection when rebooting
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 016/292] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 196/350] spi: sifive: disable clk when probe fails and remove
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 210/350] spi: dw: Fix Designware SPI loopback
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 213/350] spi: img-spfi: fix potential double release
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 294/350] spi: tegra20-slink: add missed clk_unprepare
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 303/350] spi: st-ssc4: add missed pm_runtime_disable
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 264/350] spi: pxa2xx: Add missed security checks
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 021/350] spi: Add call to spi_slave_abort() function when spidev driver is released
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 033/350] spi: gpio: prevent memory leak in spi_gpio_probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 2/2] memory: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 1/2] dt-bindings: memory: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] spi: fsl: don't map irq during probe
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [spi:for-next 1/2] drivers/spi/spi-fsl-spi.c:749: undefined reference to `of_irq_to_resource'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 2/2] spi: fsl: simplify error path in of_fsl_spi_probe()
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH v2 1/2] spi: fsl: don't map irq during probe
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [spi:for-next 1/2] drivers/spi/spi-fsl-spi.c:749: undefined reference to `of_irq_to_resource'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [spi:for-next 1/2] drivers/spi/spi-fsl-spi.c:749: undefined reference to `of_irq_to_resource'
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 2/3] TI QSPI: support large flash devices
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] TI QSPI: support large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [spi:for-next 1/2] drivers/spi/spi-fsl-spi.c:749: undefined reference to `of_irq_to_resource'
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] TI QSPI: support large flash devices
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [spi:for-next 1/2] drivers/spi/spi-fsl-spi.c:749: undefined reference to `of_irq_to_resource'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: fsl: don't map irq during probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi/topcliff-pch: Remove unneeded semicolon" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32: Switch to use GPIO descriptors for CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bitbang: Make chipselect callback optional" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH 2/2] spi: fsl: simplify error path in of_fsl_spi_probe()
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH 1/2] spi: fsl: don't map irq during probe
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• RE: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 1/3] mtd: spi-nor: hisi-sfc: Try to provide some clarity on which SFC we are
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 2/3] spi: Add HiSilicon v3xx SPI NOR flash controller driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v2 0/3] HiSilicon v3xx SFC driver
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] TI QSPI: support large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] TI QSPI: support large flash devices
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH v3 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar,Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH 6/6] spi: dw: Add support for DesignWare DWC_ssi
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 5/6] spi: dw: Add update_cr0() callback to update CTRLR0
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 4/6] spi: dw: Fix typo in few registers name
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 3/6] dt-bindings: snps,dw-apb-ssi: Add compatible string for DesignWare DWC_ssi
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 2/6] dt-bindings: spi: Delete spi-dw.txt
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 1/6] dt-bindings: spi: Unify SPI DesignWare DT documents
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• [PATCH 0/6] spi: dw: Add support for DesignWare DWC_ssi
  • From: wan.ahmad.zainie.wan.mohamad@xxxxxxxxx
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: masonccyang@xxxxxxxxxxx
• WARNING: remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi' [bisected to 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")]
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] TI QSPI: optimize transfers for dual and quad read
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 2/3] TI QSPI: support large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 1/3] TI QSPI: Fix fclk frequency
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 0/3] TI QSPI: Add support for large flash devices
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 6/6] ARM: dts: gr-peach: Enable SPIBSC
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 5/6] ARM: dts: r7s9210: Add SPIBSC device
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 1/6] spi: Add SPIBSC driver
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 4/6] ARM: dts: r7s72100: Add SPIBSC devices
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH v2 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH] spi: spi-cavium-thunderx: Add missing pci_release_regions()
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] spi: dw: Avoid BUG_ON() in case of host failure
  • From: Aditya Pakki <pakki001@xxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: oc-tiny: Use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: bitbang: Make chipselect callback optional
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: meson-spicc: Use GPIO descriptors
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH] spi: meson-spicc: Use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: stm32: Switch to use GPIO descriptors for CS
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH] dt-bindings: spi: Convert stm32 spi bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: fsl-lpspi: fix only one cs-gpio working
  • From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Applied "spi: sprd: Fix the incorrect SPI register" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 5/6] ARM: dts: r7s9210: Add SPIBSC Device support
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: r7s9210: Add SPIBSC Device support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: sprd: Fix the incorrect SPI register
  • From: Baolin Wang <baolin.wang7@xxxxxxxxx>
• RE: [PATCH 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH 5/6] ARM: dts: r7s9210: Add SPIBSC Device support
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: r7s9210: Add SPIBSC Device support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] clk: renesas: mstp: Add critical clock from device tree support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 1/6] clk: renesas: mstp: Add critical clock from device tree support
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] clk: renesas: mstp: Add critical clock from device tree support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 4/6] spi: Add SPIBSC driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "gpiolib: of: Make of_gpio_spi_cs_get_count static" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] clk: renesas: mstp: Add critical clock from device tree support
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 0/6] spi: Add Renesas SPIBSC controller
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 5/6] ARM: dts: r7s9210: Add SPIBSC Device support
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 4/6] spi: Add SPIBSC driver
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 6/6] dt-bindings: spi: Document Renesas SPIBSC bindings
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 3/6] clk: renesas: r7s9210: Add SPIBSC clock
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• [PATCH 2/6] ARM: dts: r7s72100: Add SPIBSC clocks
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
• Re: Side effect of SPI GPIO descriptor usage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Side effect of SPI GPIO descriptor usage
  • From: Phil Elwell <phil@xxxxxxxxxxxxxxx>
• [PATCH v2 -next] gpiolib: of: Make of_gpio_spi_cs_get_count static
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Applied "spi: cadence: Correct handling of native chipselect" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Jasper Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Correct handling of native chipselect" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl: Fix GPIO descriptor support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "gpio: Handle counting of Freescale chipselects" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] powerpc/devicetrees: Change 'gpios' to 'cs-gpios' on fsl,spi nodes
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 3/3 v3] spi: fsl: Handle the single hardwired chipselect case
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 2/3 v3] gpio: Handle counting of Freescale chipselects
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 1/3 v3] spi: fsl: Fix GPIO descriptor support
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: dw: Correct handling of native chipselect
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH 3/3 v3] spi: fsl: Handle the single hardwired chipselect case
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v3] gpio: Handle counting of Freescale chipselects
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3 v3] spi: fsl: Fix GPIO descriptor support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi/topcliff-pch: Remove unneeded semicolon
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH] spi: dw: Correct handling of native chipselect
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3 v2] gpio: Handle counting of Freescale chipselects
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/3 v2] spi: fsl: Handle the single hardwired chipselect case
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH 1/3 v2] spi: fsl: Fix GPIO descriptor support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] spi: cadence: Correct handling of native chipselect
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] spi: cadence: Correct handling of native chipselect
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: cadence: Correct handling of native chipselect
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: cadence: Correct handling of native chipselect
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio: Handle counting of Freescale chipselects
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH] spi: fsl: Handle the single hardwired chipselect case
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• [PATCH] spi: cadence: Correct handling of native chipselect
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] spi: pic32: Add a comment in pic32_spi_dma_prep()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] spi: pic32: Add a comment in pic32_spi_dma_prep()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] spi: pic32: Add a comment in pic32_spi_dma_prep()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: pic32: Fix an error code in pic32_spi_dma_prep()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [GIT PULL] SPI updates for v5.5
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SPI updates for v5.5
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Jasper Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Applied "spi: pic32: Retire dma_request_slave_channel_compat()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: spi: Convert stm32 QSPI bindings to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: spi: Convert stm32 QSPI bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v2] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: pic32: Retire dma_request_slave_channel_compat()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2] dt-bindings: spi: Convert stm32 QSPI bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH] dt-bindings: crypto: Convert stm32 QSPI bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Applied "spi: Fix Kconfig indentation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Fix Kconfig indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: mediatek: add cs timing configuration support
  • From: luhua xu <luhua.xu@xxxxxxxxxxxx>
• Re: [PATCH 2/2] spi: mediatek: add cs timing configuration support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mediatek: add SPI_CS_HIGH support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: mediatek: add cs timing configuration support
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH 1/2] spi: mediatek: add SPI_CS_HIGH support
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH 0/2] spi CS customization support
  • From: Luhua Xu <luhua.xu@xxxxxxxxxxxx>
• [PATCH] spi: st-ssc4: add missed pm_runtime_disable
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 087/237] spi: omap2-mcspi: Set FIFO DMA trigger level to word length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 233/237] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 115/237] spi: uniphier: fix incorrect property items
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 023/237] spi: sh-msiof: fix deferred probing
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 014/150] spi: sh-msiof: fix deferred probing
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 09/99] spi: sh-msiof: fix deferred probing
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 97/99] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 30/77] spi: omap2-mcspi: Set FIFO DMA trigger level to word length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 77/77] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 08/77] spi: sh-msiof: fix deferred probing
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 37/99] spi: omap2-mcspi: Set FIFO DMA trigger level to word length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 146/150] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 057/150] spi: omap2-mcspi: Set FIFO DMA trigger level to word length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 4/4] spi: mxic: Add support for Octal 8D-8D-8D mode
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 4/4] spi: mxic: Add support for Octal 8D-8D-8D mode
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] dt-bindings: crypto: Convert stm32 QSPI bindings to json-schema
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Applied "spi: tegra20-slink: add missed clk_unprepare" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: s3c64xx: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra20-slink: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-cpm: Correct the free:ing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: qup: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: at91-usart: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: imx: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pl022: Use dma_request_chan() directly for channel request" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/4] spi: spi-mem: Add support for Octal 8D-8D-8D mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 0/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 2/4] mtd: spi-nor: Add support for Octal 8D-8D-8D mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 4/4] spi: mxic: Add support for Octal 8D-8D-8D mode
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 3/4] mtd: spi-nor: Add Octal 8D-8D-8D mode support for Macronix mx25uw51245g
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH] spi: tegra20-slink: add missed clk_unprepare
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 7/9] spi: s3c64xx: Use dma_request_chan() directly for channel request
  • From: Andi Shyti <andi@xxxxxxxxxxx>
• Re: [PATCH 7/9] spi: s3c64xx: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 9/9] spi: tegra20-slink: Use dma_request_chan() directly for channel request
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 8/9] spi: tegra114: Use dma_request_chan() directly for channel request
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 7/9] spi: s3c64xx: Use dma_request_chan() directly for channel request
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 0/9] spi: Use dma_request_chan() directly for channel request
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 7/9] spi: s3c64xx: Use dma_request_chan() directly for channel request
  • From: Andi Shyti <andi@xxxxxxxxxxx>
• Re: [PATCH 5/9] spi: pl022: Use dma_request_chan() directly for channel request
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/9] spi: at91-usart: Use dma_request_chan() directly for channel request
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• Re: [PATCH 2/9] spi: atmel: Use dma_request_chan() directly for channel request
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• [PATCH 8/9] spi: tegra114: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 9/9] spi: tegra20-slink: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/9] spi: fsl-lpspi: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/9] spi: at91-usart: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 7/9] spi: s3c64xx: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/9] spi: atmel: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 4/9] spi: imx: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 6/9] spi: qup: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/9] spi: pl022: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/9] spi: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH AUTOSEL 4.19 180/209] spi: fsl-lpspi: Prevent FIFO under/overrun by default
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 182/209] spi: spidev: Fix OF tree warning logic
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 200/209] spi: rockchip: initialize dma_slave_config properly
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 099/115] spi: spidev: Fix OF tree warning logic
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 60/68] spi: spidev: Fix OF tree warning logic
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 67/68] spi: rockchip: initialize dma_slave_config properly
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 47/48] spi: rockchip: initialize dma_slave_config properly
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 43/48] spi: spidev: Fix OF tree warning logic
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 110/115] spi: rockchip: initialize dma_slave_config properly
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 097/115] spi: fsl-lpspi: Prevent FIFO under/overrun by default
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] spi: fsl-cpm: Correct the free:ing
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Applied "spi: Fix regression to return zero on success instead of positive value" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/2] spi: add wakeup handling to SPI core
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 2/2] spi: wire up wakeup-source/wakeirq handling
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 1/2] spi: dt-bindings: spi-controller: add wakeup-source and interrupts
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: Applied "spi: add power control when set_cs" to the spi tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] spi: Fix regression to return zero on success instead of positive value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Applied "spi: omap2-mcspi: Remove redundant checks" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add missed security checks" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: nxp-fspi: Use devm API to fix missed unregistration of controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 016/191] spi/bcm63xx-hsspi: keep pll clk enabled
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 017/191] spi: mediatek: Don't modify spi_transfer when transfer.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 069/191] spi: pic32: Use proper enum in dmaengine_prep_slave_rg
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 007/109] spi: mediatek: Don't modify spi_transfer when transfer.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 035/109] spi: pic32: Use proper enum in dmaengine_prep_slave_rg
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/66] spi: pic32: Use proper enum in dmaengine_prep_slave_rg
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: pxa2xx: Add missed security checks
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] spi: nxp-fspi: Use devm API to fix missed unregistration of controller
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] spi: omap2-mcspi: Remove redundant checks
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Applied "spi: zynq-qspi: Support two chip selects" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Anything else than CS0 is not supported yet" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Keep the bitfields naming consistent" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Do the actual hardware initialization later in the probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Enhance the Linear CFG bit definitions" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Clarify the select chip function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 7/7] spi: zynq-qspi: Support two chip selects
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 5/7] spi: zynq-qspi: Clarify the select chip function
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 6/7] spi: zynq-qspi: Do the actual hardware initialization later in the probe
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 4/7] spi: zynq-qspi: Enhance the Linear CFG bit definitions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 3/7] spi: zynq-qspi: Keep the bitfields naming consistent
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 2/7] spi: zynq-qspi: Keep the naming consistent across the driver
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 1/7] spi: zynq-qspi: Anything else than CS0 is not supported yet
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2 0/7] spi: zynq-qspi: Clarify and fix the chip selection
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH 1/7] spi: zynq-qspi: Anything else than CS0 is not supported yet
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Boot failure with 5.4-rc5, bisected to 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Applied "spi: zynq-qspi: Keep the naming consistent across the driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/7] spi: zynq-qspi: Anything else than CS0 is not supported yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 124/205] gpio: of: Handle SPI chipselect legacy bindings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.19 124/205] gpio: of: Handle SPI chipselect legacy bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 7/7] spi: zynq-qspi: Support two chip selects
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 6/7] spi: zynq-qspi: Do the actual hardware initialization later in the probe
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 5/7] spi: zynq-qspi: Clarify the select chip function
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 4/7] spi: zynq-qspi: Enhance the Linear CFG bit definitions
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 3/7] spi: zynq-qspi: Keep the bitfields naming consistent
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/7] spi: zynq-qspi: Anything else than CS0 is not supported yet
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 2/7] spi: zynq-qspi: Keep the naming consistent across the driver
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 0/7] spi: zynq-qspi: Clarify and fix the chip selection
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Applied "spi: bcm-qspi: Convert to use CS GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: fallback to using transfers when CS gpios are used" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH 2/2] spi: spi-mem: fallback to using transfers when CS gpios are used
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] spi: more GPIO CS work
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] spi: bcm-qspi: Convert to use CS GPIO descriptors
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Applied "spi: img-spfi: fix potential double release" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: img-spfi: fix potential double release
  • From: Pan Bian <bianpan2016@xxxxxxx>
• Applied "spi: bcm2835: fix typo in comment" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw: Fix Designware SPI loopback" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: bcm2835: fix typo in comment
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: dw: Fix Designware SPI loopback
  • From: thor.thayer@xxxxxxxxxxxxxxx