The patch spi: uniphier: Fix FIFO threshold has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 9cd34efbd3012171c102910ce17ee632a3cccb44 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> Date: Tue, 24 Dec 2019 09:58:23 +0900 Subject: [PATCH] spi: uniphier: Fix FIFO threshold Rx threshold means the value to inform the receiver when the number of words in Rx FIFO is equal to or more than the value. Similarly, Tx threshold means the value to inform the sender when the number of words in Tx FIFO is equal to or less than the value. The controller triggers the driver to start the transfer. In case of Rx, the driver wants to detect that the specified number of words N are in Rx FIFO, so the value of Rx threshold should be N. In case of Tx, the driver wants to detect that the same number of spaces as Rx are in Tx FIFO, so the value of Tx threshold should be (FIFO size - N). For example, in order for the driver to receive at least 3 words from Rx FIFO, set 3 to Rx threshold. +-+-+-+-+-+-+-+-+ | | | | | |*|*|*| +-+-+-+-+-+-+-+-+ In order for the driver to send at least 3 words to Tx FIFO, because it needs at least 3 spaces, set 8(FIFO size) - 3 = 5 to Tx threshold. +-+-+-+-+-+-+-+-+ |*|*|*|*|*| | | | +-+-+-+-+-+-+-+-+ This adds new function uniphier_spi_set_fifo_threshold() to set threshold value to the register. And more, FIFO counts by 'words', so this renames 'fill_bytes' with 'fill_words', and fixes the calculation using bytes_per_words. Fixes: 37ffab817098 ("spi: uniphier: introduce polling mode") Cc: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1577149107-30670-2-git-send-email-hayashi.kunihiko@xxxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-uniphier.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c index 47cde1864630..ce9b30112e26 100644 --- a/drivers/spi/spi-uniphier.c +++ b/drivers/spi/spi-uniphier.c @@ -290,25 +290,32 @@ static void uniphier_spi_recv(struct uniphier_spi_priv *priv) } } -static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv) +static void uniphier_spi_set_fifo_threshold(struct uniphier_spi_priv *priv, + unsigned int threshold) { - unsigned int fifo_threshold, fill_bytes; u32 val; - fifo_threshold = DIV_ROUND_UP(priv->rx_bytes, - bytes_per_word(priv->bits_per_word)); - fifo_threshold = min(fifo_threshold, SSI_FIFO_DEPTH); - - fill_bytes = fifo_threshold - (priv->rx_bytes - priv->tx_bytes); - - /* set fifo threshold */ val = readl(priv->base + SSI_FC); val &= ~(SSI_FC_TXFTH_MASK | SSI_FC_RXFTH_MASK); - val |= FIELD_PREP(SSI_FC_TXFTH_MASK, fifo_threshold); - val |= FIELD_PREP(SSI_FC_RXFTH_MASK, fifo_threshold); + val |= FIELD_PREP(SSI_FC_TXFTH_MASK, SSI_FIFO_DEPTH - threshold); + val |= FIELD_PREP(SSI_FC_RXFTH_MASK, threshold); writel(val, priv->base + SSI_FC); +} + +static void uniphier_spi_fill_tx_fifo(struct uniphier_spi_priv *priv) +{ + unsigned int fifo_threshold, fill_words; + unsigned int bpw = bytes_per_word(priv->bits_per_word); + + fifo_threshold = DIV_ROUND_UP(priv->rx_bytes, bpw); + fifo_threshold = min(fifo_threshold, SSI_FIFO_DEPTH); + + uniphier_spi_set_fifo_threshold(priv, fifo_threshold); + + fill_words = fifo_threshold - + DIV_ROUND_UP(priv->rx_bytes - priv->tx_bytes, bpw); - while (fill_bytes--) + while (fill_words--) uniphier_spi_send(priv); } -- 2.20.1