From: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>
Add device tree files for SAM9X60 SoC and SAM9X60-EK board.
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/at91-sam9x60ek.dts | 647 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/sam9x60.dtsi | 691 +++++++++++++++++++++++++++++++++++
3 files changed, 1340 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-sam9x60ek.dts
create mode 100644 arch/arm/boot/dts/sam9x60.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08011dc8c7a6..36e90f07be13 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -44,6 +44,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+ at91-sam9x60ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2-2.dtb \
at91-kizbox3-hs.dtb \
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
new file mode 100644
index 000000000000..9f30132d7d7b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+ model = "Microchip SAM9X60-EK";
+ compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ regulators: regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_1v8: fixed-regulator-vdd_1v8@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd_1v5: fixed-regulator-vdd_1v5@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_1V5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD1_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD2_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_key_gpio_default>;
+ status = "okay";
+
+ sw1 {
+ label = "SW1";
+ gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+ linux,code=<0x104>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay"; /* Conflict with pwm0. */
+
+ red {
+ label = "red";
+ gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ green {
+ label = "green";
+ gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "blue";
+ gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&adc {
+ vddana-supply = <&vdd1_3v3>;
+ vref-supply = <&vdd1_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+ status = "okay";
+};
+
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ status = "okay";
+};
+
+&classd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_classd_default>;
+ atmel,pwm-type = "diff";
+ atmel,non-overlap-time = <10>;
+ status = "okay";
+};
+
+&dbgu {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+ status = "okay";
+
+ nand_controller: nand-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0xc0000>;
+ };
+
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
+ label = "U-Boot Env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+ };
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c0: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ atmel,fifo-size = <16>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c32";
+ reg = <0x53>;
+ pagesize = <16>;
+ size = <128>;
+ status = "okay";
+ };
+ };
+};
+
+&flx4 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "disabled";
+
+ spi0: spi@400 {
+ compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ clock-names = "spi_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
+
+&flx5 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ uart1: serial@200 {
+ compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(10))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ clock-names = "usart";
+ pinctrl-0 = <&pinctrl_flx5_default>;
+ pinctrl-names = "default";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "okay";
+ };
+};
+
+&flx6 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx6_default>;
+ atmel,fifo-size = <16>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "okay";
+
+ gpio_exp: mcp23008@20 {
+ compatible = "microchip,mcp23008";
+ reg = <0x20>;
+ };
+ };
+};
+
+&i2s {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_default>;
+ #sound-dai-cells = <0>;
+ status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_rmii>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ };
+};
+
+&pinctrl {
+ atmel,mux-mask = <
+ /* A B C */
+ 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */
+ 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */
+ 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */
+ 0x003FFFFF 0x003F8000 0x00000000 /* pioD */
+ >;
+
+ adc {
+ pinctrl_adc_default: adc_default {
+ atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_adtrg_default: adtrg_default {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2s {
+ pinctrl_i2s_default: i2s {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SCK */
+ AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SWS */
+ AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDIN */
+ AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* I2SDOUT */
+ AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* I2SMCK */
+ };
+ };
+
+ qspi {
+ pinctrl_qspi: qspi {
+ atmel,pins =
+ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+ AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+ AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ nand {
+ pinctrl_nand_oe_we: nand-oe-we-0 {
+ atmel,pins =
+ <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_nand_rb: nand-rb-0 {
+ atmel,pins =
+ <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand_cs: nand-cs-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ ebi {
+ pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+
+ pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+ atmel,pins =
+ <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ebi_addr_nand: ebi-addr-0 {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+ AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+ };
+ };
+
+ flexcom {
+ pinctrl_flx0_default: flx0_twi {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_flx4_default: flx4_spi {
+ atmel,pins =
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_flx5_default: flx_uart {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+ AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_flx6_default: flx6_twi {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ classd {
+ pinctrl_classd_default: classd {
+ atmel,pins =
+ <AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+ AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0 */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX0 */
+ AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN0 mux */
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1 RXD1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANTX1 TXD1 */
+ AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN /* Enable CAN1 mux */
+ AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>; /* Enable CAN Transceivers */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_rmii: macb0_rmii-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB0 periph A */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB1 periph A */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB2 periph A */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB3 periph A */
+ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
+ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
+ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
+ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
+ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
+ };
+ };
+
+ pwm0 {
+ pinctrl_pwm0_0: pwm0_0 {
+ atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_1: pwm0_1 {
+ atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_2: pwm0_2 {
+ atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_pwm0_3: pwm0_3 {
+ atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ sdmmc0 {
+ pinctrl_sdmmc0_default: sdmmc0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA17 CK periph A with pullup */
+ AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA16 CMD periph A with pullup */
+ AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA15 DAT0 periph A */
+ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA18 DAT1 periph A with pullup */
+ AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */
+ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */
+ };
+ };
+
+ gpio_keys {
+ pinctrl_key_gpio_default: pinctrl_key_gpio {
+ atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
+}; /* pinctrl */
+
+&pmc {
+ atmel,osc-bypass;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+ status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ status = "okay";
+ cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+ disable-wp;
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay"; /* Conflict with i2s. */
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+
+ at91bootstrap@0 {
+ label = "qspi: at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "qspi: bootloader";
+ reg = <0x40000 0xc0000>;
+ };
+
+ bootloaderenvred@100000 {
+ label = "qspi: bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
+ label = "qspi: bootloader env";
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "qspi: device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "qspi: kernel";
+ reg = <0x200000 0x600000>;
+ };
+ };
+};
+
+&shutdown_controller {
+ atmel,shdwc-debouncer = <976>;
+ status = "okay";
+
+ input@0 {
+ reg = <0>;
+ };
+};
+
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
+&usb1 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioD 15 GPIO_ACTIVE_HIGH
+ &pioD 16 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
new file mode 100644
index 000000000000..2eb92a90453b
--- /dev/null
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Microchip SAM9X60 SoC";
+ compatible = "microchip,sam9x60";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ sram: sram@300000 {
+ compatible = "mmio-sram";
+ reg = <0x00300000 0x100000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb1: ohci@600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ usb2: ehci@700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "usb_clk", "ehci_clk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
+ ebi: ebi@10000000 {
+ compatible = "microchip,sam9x60-ebi";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ atmel,smc = <&smc>;
+ microchip,sfr = <&sfr>;
+ reg = <0x10000000 0x60000000>;
+ ranges = <0x0 0x0 0x10000000 0x10000000
+ 0x1 0x0 0x20000000 0x10000000
+ 0x2 0x0 0x30000000 0x10000000
+ 0x3 0x0 0x40000000 0x10000000
+ 0x4 0x0 0x50000000 0x10000000
+ 0x5 0x0 0x60000000 0x10000000>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ status = "disabled";
+
+ nand_controller: nand-controller {
+ compatible = "microchip,sam9x60-nand-controller";
+ ecc-engine = <&pmecc>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+ };
+ };
+
+ sdmmc0: sdio-host@80000000 {
+ compatible = "microchip,sam9x60-sdhci";
+ reg = <0x80000000 0x300>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+
+ sdmmc1: sdio-host@90000000 {
+ compatible = "microchip,sam9x60-sdhci";
+ reg = <0x90000000 0x300>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flx4: flexcom@f0000000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0000000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0000000 0x800>;
+ status = "disabled";
+ };
+
+ flx5: flexcom@f0004000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0004000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0004000 0x800>;
+ status = "disabled";
+ };
+
+ dma0: dma-controller@f0008000 {
+ compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+ reg = <0xf0008000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+ clock-names = "dma_clk";
+ };
+
+ ssc: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ qspi: spi@f0014000 {
+ compatible = "microchip,sam9x60-qspi";
+ reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(26))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(27))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+ clock-names = "pclk", "qspick";
+ atmel,pmc = <&pmc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s: i2s@f001c000 {
+ compatible = "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ flx11: flexcom@f0020000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0020000 0x800>;
+ status = "disabled";
+ };
+
+ flx12: flexcom@f0024000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf0024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0024000 0x800>;
+ status = "disabled";
+ };
+
+ pit64b: timer@f0028000 {
+ compatible = "microchip,sam9x60-pit64b";
+ reg = <0xf0028000 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+ clock-names = "pclk", "gclk";
+ };
+
+ sha: sha@f002c000 {
+ compatible = "atmel,at91sam9g46-sha";
+ reg = <0xf002c000 0x100>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ clock-names = "sha_clk";
+ status = "okay";
+ };
+
+ trng: trng@f0030000 {
+ compatible = "microchip,sam9x60-trng";
+ reg = <0xf0030000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ status = "okay";
+ };
+
+ aes: aes@f0034000 {
+ compatible = "atmel,at91sam9g46-aes";
+ reg = <0xf0034000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ clock-names = "aes_clk";
+ status = "okay";
+ };
+
+ tdes: tdes@f0038000 {
+ compatible = "atmel,at91sam9g46-tdes";
+ reg = <0xf0038000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(30))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+ clock-names = "tdes_clk";
+ status = "okay";
+ };
+
+ classd: classd@f003c000 {
+ compatible = "atmel,sama5d2-classd";
+ reg = <0xf003c000 0x100>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(35))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ can0: can@f8000000 {
+ compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+ reg = <0xf8000000 0x300>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ can1: can@f8004000 {
+ compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+ reg = <0xf8004000 0x300>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ tcb0: timer@f8008000 {
+ compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf8008000 0x100>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ tcb1: timer@f800c000 {
+ compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf800c000 0x100>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+ flx6: flexcom@f8010000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8010000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8010000 0x800>;
+ status = "disabled";
+ };
+
+ flx7: flexcom@f8014000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8014000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8014000 0x800>;
+ status = "disabled";
+ };
+
+ flx8: flexcom@f8018000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8018000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8018000 0x800>;
+ status = "disabled";
+ };
+
+ flx0: flexcom@f801c000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf801c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf801c000 0x800>;
+ status = "disabled";
+ };
+
+ flx1: flexcom@f8020000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8020000 0x800>;
+ status = "disabled";
+ };
+
+ flx2: flexcom@f8024000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8024000 0x800>;
+ status = "disabled";
+ };
+
+ flx3: flexcom@f8028000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8028000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8028000 0x800>;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f802c000 {
+ compatible = "cdns,sam9x60-macb", "cdns,macb";
+ reg = <0xf802c000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ macb1: ethernet@f8030000 {
+ compatible = "cdns,sam9x60-macb", "cdns,macb";
+ reg = <0xf8030000 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+ clock-names = "hclk", "pclk";
+ status = "disabled";
+ };
+
+ pwm0: pwm@f8034000 {
+ compatible = "microchip,sam9x60-pwm";
+ reg = <0xf8034000 0x300>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+ #pwm-cells = <3>;
+ status="disabled";
+ };
+
+ hlcdc: hlcdc@f8038000 {
+ compatible = "microchip,sam9x60-hlcdc";
+ reg = <0xf8038000 0x4000>;
+ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ #pwm-cells = <3>;
+ };
+ };
+
+ flx9: flexcom@f8040000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8040000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8040000 0x800>;
+ status = "disabled";
+ };
+
+ flx10: flexcom@f8044000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8044000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8044000 0x800>;
+ status = "disabled";
+ };
+
+ isi: isi@f8048000 {
+ compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+ reg = <0xf8048000 0x100>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+ clock-names = "isi_clk";
+ status = "disabled";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ adc: adc@f804c000 {
+ compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+ reg = <0xf804c000 0x100>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+ clock-names = "adc_clk";
+ dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+ dma-names = "rx";
+ atmel,min-sample-rate-hz = <200000>;
+ atmel,max-sample-rate-hz = <20000000>;
+ atmel,startup-time-ms = <4>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ sfr: sfr@f8050000 {
+ compatible = "microchip,sam9x60-sfr", "syscon";
+ reg = <0xf8050000 0x100>;
+ };
+
+ matrix: matrix@ffffde00 {
+ compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+ reg = <0xffffde00 0x200>;
+ };
+
+ pmecc: ecc-engine@ffffe000 {
+ compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+ reg = <0xffffe000 0x300>,
+ <0xffffe600 0x100>;
+ };
+
+ mpddrc: mpddrc@ffffe800 {
+ compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+ reg = <0xffffe800 0x200>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ smc: smc@ffffea00 {
+ compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+ reg = <0xffffea00 0x100>;
+ };
+
+ aic: interrupt-controller@fffff100 {
+ compatible = "microchip,sam9x60-aic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffff100 0x100>;
+ atmel,external-irqs = <31>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ pioA: gpio@fffff400 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <26>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <22>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "microchip,sam9x60-pmc", "syscon";
+ reg = <0xfffffc00 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+ clock-names = "td_slck", "md_slck", "main_xtal";
+ };
+
+ reset_controller: rstc@fffffe00 {
+ compatible = "microchip,sam9x60-rstc";
+ reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k 0>;
+ };
+
+ shutdown_controller: shdwc@fffffe10 {
+ compatible = "microchip,sam9x60-shdwc";
+ reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ atmel,wakeup-rtt-timer;
+ status = "disabled";
+ };
+
+ pit: timer@fffffe40 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+ };
+
+ clk32k: sckc@fffffe50 {
+ compatible = "microchip,sam9x60-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <1>;
+ };
+
+ gpbr: syscon@fffffe60 {
+ compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffe60 0x10>;
+ };
+
+ rtc: rtc@fffffea8 {
+ compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+ reg = <0xfffffea8 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k 0>;
+ };
+ };
+ };
+};
--
2.7.4
[PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- Date: Wed, 8 Jan 2020 14:55:23 +0200
- Cc: <devicetree@xxxxxxxxxxxxxxx>, <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>, <linux-kernel@xxxxxxxxxxxxxxx>, <dmaengine@xxxxxxxxxxxxxxx>, <linux-iio@xxxxxxxxxxxxxxx>, <linux-media@xxxxxxxxxxxxxxx>, <linux-spi@xxxxxxxxxxxxxxx>, <linux-mtd@xxxxxxxxxxxxxxxxxxx>, <linux-can@xxxxxxxxxxxxxxx>, <netdev@xxxxxxxxxxxxxxx>, <linux-rtc@xxxxxxxxxxxxxxx>, Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@xxxxxxxxxxxxx>, Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>, Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
- In-reply-to: <1578488123-26127-1-git-send-email-claudiu.beznea@microchip.com>
- Ironport-sdr: q/E3kw/EzLjYxWS0VnS7w8yoChcyhd/TXbdDWRkOr/Qtzn7V14oMO1iWukrwSjgo9B2U2UsMbb Fcn4KUOQBGE23yms+vm5Xb+3mJLuyAhT/g5D3dLHVE32K0ilSonHYUdlmFGaHd1MpTH6hnOvoM N8vR76QR37KcKhTsZTMp9SLlkPUydLis9qRNX6/H4gJ1bMZ8LFNKBn/TkzFDzJ6U5G8i3UcXws lwztxR99DWH+J5tckfTRA5vdVSnlGkAExwRQfep/Zd2zQHdQTZsO12iOUAewAbiACZi9Wx5KKS TZU=
- References: <1578488123-26127-1-git-send-email-claudiu.beznea@microchip.com>
- Follow-Ups:
- Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- From: Nicolas.Ferre
- Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- References:
- [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
- From: Claudiu Beznea
- [PATCH 00/16] add device tree for SAM9X60 SoC and SAM9X60-EK board
- Prev by Date: [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Next by Date: Re: [PATCH 1/2] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
- Previous by thread: [PATCH 09/16] dt-bindings: atmel-smc: add microchip,sam9x60-smc
- Next by thread: Re: [PATCH 16/16] ARM: dts: at91: sam9x60: add device tree for soc and board
- Index(es):
 |