[PATCH 01/16] dt-bindings: at_xdmac: add entry for microchip compatibles

[Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>]

Add entry for microchip compatibles. This is for "microchip,sam9x60-dma"
DT binding.

Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/dma/atmel-xdma.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
index 0eb2b3207e08..081a76c3db2f 100644
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -2,9 +2,10 @@
 
 * XDMA Controller
 Required properties:
-- compatible: Should be "atmel,<chip>-dma".
+- compatible: Should be "atmel,<chip>-dma" or "microchip,<chip>-dma".
   <chip> compatible description:
   - sama5d4: first SoC adding the XDMAC
+  - sam9x60: Microchip SoC
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in
-- 
2.7.4