Re: [PATCH v2 2/6] dt-bindings: spi: Document Renesas SPIBSC bindings

[Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>]

Hello!

On 12/09/2019 05:09 PM, Geert Uytterhoeven wrote:

>> Document the bindings used by the Renesas SPI bus space controller.
>>
>> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
>> ---
>> v2:
>>  * change to YAML format
>>  * add interrupts property
>>  * Used more terms directly from the hardware manual
> 
> Thanks for the update!
> 
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/renesas,spibsc.yaml
[...]
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +          - enum:
>> +              - renesas,r7s72100-spibsc     # RZ/A1
>> +              - renesas,r7s9210-spibsc      # RZ/A2
>> +
>> +  reg:
>> +    minItems: 2
>> +    maxItems: 2
>> +    items:
>> +      - description: Registers
>> +      - description: Memory Mapped Address Space
> 
> The second one is not needed, if you would add "ranges" for the
> memory-mapped mode.

   I'm not sure we can do that. The flash bus is accessed via a window
with the high bits in the DREAR reg, even in the direct read mode...

> 
>> +
>> +  interrupts:
>> +    description: Some HW versions do not contain interrupts
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  flash:
>> +    description: |
>> +      (Optional) In order to use the HW for R/W access ("Manual Mode"), a "flash"
>> +      subnode must be present with a "compatible" property that contains
>> +      "jedec,spi-nor". If a spi-nor property is not found, the HW is assumed to be
>> +      already operating in "External Address Space Read Mode".
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - '#address-cells'
>> +  - '#size-cells'
> 
> I would make the flash subnode mandatory.

   Agreed.

>> +
>> +examples:
>> +  - |
>> +    # This example is for "Manual Mode"
>> +    spibsc: spi@1f800000 {
>> +        compatible = "renesas,r7s9210-spibsc";
>> +        reg = <0x1f800000 0x100>, <0x20000000 0x10000000>;
>> +        clocks = <&cpg CPG_MOD 83>;
>> +        power-domains = <&cpg>;
>> +        interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        flash@0 {
>> +            compatible = "jedec,spi-nor";
>> +            reg = <0>;
>> +            spi-max-frequency = <40000000>;
>> +
>> +            partitions {
>> +                compatible = "fixed-partitions";
>> +                #address-cells = <1>;
>> +                #size-cells = <1>;
>> +
>> +                partition@0000000 {
>> +                    label = "u-boot";
>> +                    reg = <0x00000000 0x80000>;
>> +                };
>> +            };
>> +        };
>> +
>> +    # This example is for "External Address Space Read Mode"
>> +    spibsc: spi@1f800000 {
>> +        compatible = "renesas,r7s9210-spibsc";
>> +        reg = <0x1f800000 0x100>, <0x20000000 0x10000000>;
>> +        clocks = <&cpg CPG_MOD 83>;
>> +        power-domains = <&cpg>;
>> +        interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +    };
>> +    flash@20000000 {
> 
> This does not describe the hardware topology: the flash node should be
> a subnode of the spibsc node, as it relies on the spibsc being clocked.

   ACK.

[...]

> Gr{oetje,eeting}s,
> 
>                         Geert

MBR, Sergei