[PATCH AUTOSEL 4.19 074/167] spi: spi-gpio: fix SPI_CS_HIGH capability

[Sasha Levin <sashal@xxxxxxxxxx>]

From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>

[ Upstream commit b89fefda7d4e3a649129584d855be233c7465264 ]

spi-gpio is capable of dealing with active-high chip-selects.
Unfortunately, commit 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE
support") broke this by setting master->mode_bits, which overrides
the setting in the spi-bitbang code.  Fix this.

[Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie]

Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/spi/spi-gpio.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 088772ebef9bd..77838d8fd9bb6 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -410,7 +410,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		return status;
 
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
-	master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL;
+	master->mode_bits = SPI_3WIRE | SPI_CPHA | SPI_CPOL | SPI_CS_HIGH;
 	master->flags = master_flags;
 	master->bus_num = pdev->id;
 	/* The master needs to think there is a chipselect even if not connected */
@@ -437,7 +437,6 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3;
 	}
 	spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer;
-	spi_gpio->bitbang.flags = SPI_CS_HIGH;
 
 	status = spi_bitbang_start(&spi_gpio->bitbang);
 	if (status)
-- 
2.20.1