Linux Serial

• Thread Index

• [PATCH v2 2/2] serial: 8250_lpss: Switch to pcim_iomap() instead of pci_ioremap_bar()
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_lpss: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Jiri Slaby
• [PATCH v1 1/1] serial: 8250_mid: Get rid of custom MID_DEVICE() macro
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: 8250_lpss: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Jiri Slaby
• [PATCH v1 1/1] serial: 8250_mid: Remove unneeded test for ->setup() presence
  • From: Andy Shevchenko
• [PATCH v1 1/1] serial: 8250_mid: Balance reference count for PCI DMA device
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
  • From: Andy Shevchenko
• [PATCH v8 0/2] Add UART driver for Suplus SP7021 SoC
  • From: Hammer Hsieh
• [PATCH v8 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v8 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Hammer Hsieh
• RE: [PATCH] tty: serial: add missing pci_dev_put() before return
  • From: 王擎
• [PATCH] dt-bindings: serial: fsl-lpuart: Add imx93 compatible string
  • From: Peng Fan (OSS)
• Re: [PATCH] tty: serial: add missing pci_dev_put() before return
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: add missing pci_dev_put() before return
  • From: Jiri Slaby
• Re: [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
  • From: Tomasz Moń
• Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
  • From: Jiri Slaby
• [PATCH] tty: serial: add missing pci_dev_put() before return
  • From: Qing Wang
• [PATCH] tty: serial: 8250: add missing pci_dev_put() before return
  • From: Qing Wang
• Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
  • From: kernel test robot
• [PATCH] serial: imx: leave IRTS disabled if using modem-control CTS
  • From: Tim Harvey
• [tty:tty-testing] BUILD SUCCESS 802d00bd774b77fe132e9e83462b96fb9919411c
  • From: kernel test robot
• Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
  • From: kernel test robot
• Re: [PATCH v2] serial: parisc: GSC: fix build when IOSAPIC is not set
  • From: Helge Deller
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Helge Deller
• Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Uwe Kleine-König
• [PATCH v2] serial: parisc: GSC: fix build when IOSAPIC is not set
  • From: Randy Dunlap
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Randy Dunlap
• Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Lino Sanfilippo
• Re: [PATCH v8 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
  • From: Gregory CLEMENT
• Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Lino Sanfilippo
• Re: [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
  • From: Geert Uytterhoeven
• Re: [PATCH v1 1/2] driver core: add a wrapper to device probe log helper to return pointer
  • From: Geert Uytterhoeven
• [PATCH v1 2/2] serial: sh-sci: Switch to use dev_err_probe_ptr()
  • From: Andy Shevchenko
• [PATCH v1 1/2] driver core: add a wrapper to device probe log helper to return pointer
  • From: Andy Shevchenko
• Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
  • From: Greg Kroah-Hartman
• Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
  • From: Pali Rohár
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH v2 3/3] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Lee Jones
• Re: [PATCH v2 2/3] mfd: exynos-lpass: Drop unneeded syscon.h include
  • From: Lee Jones
• Re: [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
  • From: Greg Kroah-Hartman
• RE: Reg: Serial port driver for microchip's new PCIe UART device
  • From: Kumaravel.Thiagarajan
• [PATCH] MAINTAINERS: Add Pali Rohár as mvebu-uart.c maintainer
  • From: Pali Rohár
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Helge Deller
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Helge Deller
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Andy Shevchenko
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Uwe Kleine-König
• RE: [PATCH 1/2] dt-bindings: serial: pl011: Add 'arm,xlnx-uart'
  • From: Shubhrajyoti Datta
• Re: [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Jiri Slaby
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Randy Dunlap
• [PATCH 1/9] serial: core: move RS485 configuration tasks from drivers into core
  • From: Lino Sanfilippo
• Move RS485 implementation from drivers to serial core
  • From: Lino Sanfilippo
• [PATCH 6/9] serial: max310: remove redundant code in rs485_config
  • From: Lino Sanfilippo
• [PATCH 3/9] serial: stm32: remove redundant code in rs485_config
  • From: Lino Sanfilippo
• [PATCH 5/9] serial: omap: remove redundant code in rs485_config
  • From: Lino Sanfilippo
• [PATCH 4/9] serial: sc16is7xx: remove redundant code in rs485_config
  • From: Lino Sanfilippo
• [PATCH 9/9] serial: atmel: remove redundant assignment in rs485_config
  • From: Lino Sanfilippo
• [PATCH 8/9] serial: fsl_lpuart: remove redundant code in rs485_config functions
  • From: Lino Sanfilippo
• [PATCH 2/9] serial: amba-pl011: remove redundant code in rs485_config
  • From: Lino Sanfilippo
• [PATCH 7/9] serial: imx: remove redundant assignment in rs485_config
  • From: Lino Sanfilippo
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Helge Deller
• Re: [PATCH v8 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
  • From: Marek Behún
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Randy Dunlap
• Re: [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Helge Deller
• [PATCH] serial: parisc: GSC: fix build when PCI_LBA is not set
  • From: Randy Dunlap
• [PATCH v2 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [GIT PULL] TTY/Serial driver fixes for 5.17-rc4
  • From: pr-tracker-bot
• [PATCH v2 1/2] serial: 8250: Correct Kconfig help text for blacklisted PCI devices
  • From: Maciej W. Rozycki
• [PATCH v2 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
  • From: Maciej W. Rozycki
• [PATCH v2 0/2] serial: 8250: Correct basic issues with the PCI blacklist
  • From: Maciej W. Rozycki
• Re: [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: Andy Shevchenko
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Sergey Organov
• Re: [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
  • From: kernel test robot
• Re: [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
  • From: kernel test robot
• [GIT PULL] TTY/Serial driver fixes for 5.17-rc4
  • From: Greg KH
• [PATCH v3 2/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: Maciej W. Rozycki
• [PATCH v3 1/2] serial: 8250: Fold EndRun device support into OxSemi Tornado code
  • From: Maciej W. Rozycki
• [PATCH v3 0/2] serial: 8250: Fixes for Oxford Semiconductor 950 UARTs
  • From: Maciej W. Rozycki
• [PATCH 2/2] serial: 8250: Report which option to enable for blacklisted PCI devices
  • From: Maciej W. Rozycki
• [PATCH 1/2] serial: 8250: Correct Kconfig help text for blacklisted PCI devices
  • From: Maciej W. Rozycki
• [PATCH 0/2] serial: 8250: Correct basic issues with the PCI blacklist
  • From: Maciej W. Rozycki
• Re: [PATCH v2 1/2] serial: 8250: Add proper clock handling for OxSemi PCIe devices
  • From: Maciej W. Rozycki
• [PATCH v3] serial: 8250_aspeed_vuart: replace snprintf with sysfs_emit
  • From: davidcomponentone
• [tty:tty-testing] BUILD SUCCESS ad30d108a5135af584ff47f5ff81be971b6c26f1
  • From: kernel test robot
• Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Zev Weiss
• [no subject]
  • From: Unknown
• [PATCH v8 3/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock
  • From: Marek Behún
• [PATCH v8 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it
  • From: Marek Behún
• [PATCH v8 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Bd
  • From: Marek Behún
• [PATCH v8 4/6] dt-bindings: mvebu-uart: update information about UART clock
  • From: Marek Behún
• [PATCH v8 2/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Marek Behún
• [PATCH v8 1/6] math64: New DIV_U64_ROUND_CLOSEST helper
  • From: Marek Behún
• [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Marek Behún
• Re: Reg: Serial port driver for microchip's new PCIe UART device
  • From: Greg KH
• Re: [PATCH v2 1/3] serial: 8250: Handle UART without interrupt on TEMT using em485
  • From: Ilpo Järvinen
• Re: [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Andy Shevchenko
• [PATCH v2] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Zev Weiss
• Re: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl
  • From: Abel Vesa
• Re: [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
  • From: Abel Vesa
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Tim Harvey
• Re: [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
  • From: Abel Vesa
• Re: [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
  • From: Abel Vesa
• Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Abel Vesa
• [PATCH v2 2/2] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
  • From: Abel Vesa
• [PATCH v2 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Abel Vesa
• Re: [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
  • From: Johan Hovold
• Re: [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Andy Shevchenko
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Greg Kroah-Hartman
• RE: Reg: Serial port driver for microchip's new PCIe UART device
  • From: Kumaravel.Thiagarajan
• [PATCH v2] serial: 8259_aspeed_vuart: replace snprintf with sysfs_emit
  • From: davidcomponentone
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Zev Weiss
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Zev Weiss
• Re: [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Greg Kroah-Hartman
• [PATCH] serial: 8250_aspeed_vuart: add PORT_ASPEED_VUART port type
  • From: Zev Weiss
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Rob Herring
• Re: Reg: Serial port driver for microchip's new PCIe UART device
  • From: Greg KH
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Reg: Serial port driver for microchip's new PCIe UART device
  • From: Kumaravel.Thiagarajan
• Re: [PATCH] serial: 8259: replace snprintf with sysfs_emit
  • From: Andy Shevchenko
• Re: [PATCH] fix serdev bind/unbind
  • From: Dmitry Torokhov
• Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Shawn Guo
• Re: [PATCH 06/12] dt-bindings: serial: add compatible string for Nuclei DemoSoC UART
  • From: Rob Herring
• Re: [PATCH 01/12] dt-bindings: vendor-prefixes: add Nuclei
  • From: Rob Herring
• Re: [PATCH 08/12] dt-bindings: riscv: add binding for Nuclei platform boards
  • From: Rob Herring
• Re: [PATCH 03/12] dt-bindings: riscv: add compatible strings for Nuclei UX600 series
  • From: Rob Herring
• Re: [PATCH 07/12] dt-bindings: spi: add compatible string for Nuclei DemoSoC SPI
  • From: Rob Herring
• Re: [PATCH 05/12] dt-bindings: interrupt-controller: add compatible string for UX600 PLIC
  • From: Rob Herring
• Re: [PATCH 04/12] dt-bindings: timer: add compatible for Nuclei UX600 CLINT-compat timer
  • From: Rob Herring
• Re: [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
  • From: Rob Herring
• Re: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Rob Herring
• [PATCH] serial: 8259: replace snprintf with sysfs_emit
  • From: davidcomponentone
• [tty:tty-testing] BUILD SUCCESS fcc446c8aa6303b247b0d88f460167b731265282
  • From: kernel test robot
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Mark Brown
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Greg KH
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] serial: mctrl_gpio: add a new API to enable / disable wake_irq
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Re: [PATCH v3] serial: 8250_bcm2835aux: Add ACPI support
  • From: Andy Shevchenko
• Re: [PATCH v3] serial: 8250_bcm2835aux: Add ACPI support
  • From: Jeremy Linton
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Jiri Slaby
• Re: [PATCH v3] serial: 8250_bcm2835aux: Add ACPI support
  • From: Florian Fainelli
• Re: [PATCH v2] serial: 8250_bcm2835aux: Add ACPI support
  • From: Adrien Thierry
• [PATCH v3] serial: 8250_bcm2835aux: Add ACPI support
  • From: Adrien Thierry
• Re: [PATCH v2] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Rob Herring
• Re: [PATCH V6 0/5] Use CCF to describe the UART baud rate clock
  • From: Yu Tu
• [PATCH v2 2/3] dt-bindings: serial: renesas,scif: Document RZ/G2UL SoC
  • From: Biju Das
• [PATCH v2 1/3] dt-bindings: serial: renesas,scif: Remove redundant renesas,scif-r9a07g054
  • From: Biju Das
• [PATCH v2 3/3] dt-bindings: serial: renesas,sci: Document RZ/G2UL SoC
  • From: Biju Das
• Re: [PATCH 3/3] dt-bindings: serial: renesas,sci: Document RZ/G2UL SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] dt-bindings: serial: renesas,scif: Document RZ/G2UL SoC
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] dt-bindings: serial: renesas,scif: Remove redundant renesas,scif-r9a07g054
  • From: Geert Uytterhoeven
• RE: [PATCH 2/3] dt-bindings: serial: renesas,scif: Document RZ/G2UL SoC
  • From: Biju Das
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Re: [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Greg KH
• [PATCH v7 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v7 0/2] Add UART driver for Suplus SP7021 SoC
  • From: Hammer Hsieh
• [PATCH v7 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH 3/3] dt-bindings: serial: renesas,sci: Document RZ/G2UL SoC
  • From: Biju Das
• [PATCH 2/3] dt-bindings: serial: renesas,scif: Document RZ/G2UL SoC
  • From: Biju Das
• [PATCH 1/3] dt-bindings: serial: renesas,scif: Remove redundant renesas,scif-r9a07g054
  • From: Biju Das
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Sam Ravnborg
• [tty:tty-linus] BUILD SUCCESS 28cb138f559f8c1a1395f5564f86b8bbee83631b
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 186ab09930aac24fad59a56d22ea507c8505b84f
  • From: kernel test robot
• Re: [BUG] tty: serial: possible deadlock in uart_remove_one_port() and uart_hangup()
  • From: Jia-Ju Bai
• Re: [PATCH 1/2] serial: mctrl_gpio: add a new API to enable / disable wake_irq
  • From: Erwan LE RAY
• Re: [PATCH v1 1/1] serial: core: Drop duplicate NULL check in uart_*shutdown()
  • From: Andy Shevchenko
• [PATCH v2 1/1] serial: core: Drop duplicate NULL check in uart_*shutdown()
  • From: Andy Shevchenko
• Re: [PATCH v1 1/1] serial: core: Drop duplicate NULL check in uart_*shutdown()
  • From: Greg Kroah-Hartman
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Joe Perches
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Andrew Lunn
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Russell King (Oracle)
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Joe Perches
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Russell King (Oracle)
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Adrien Thierry
• [PATCH v2] serial: 8250_bcm2835aux: Add ACPI support
  • From: Adrien Thierry
• [PATCH 1/2] serial: mctrl_gpio: add a new API to enable / disable wake_irq
  • From: Erwan Le Ray
• [PATCH 2/2] serial: stm32: enable / disable wake irqs for mcrtl_gpio wakeup sources
  • From: Erwan Le Ray
• [PATCH 0/2] STM32 enable gpio irqs as wakeup irqs for uart port
  • From: Erwan Le Ray
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Verdun, Jean-Marie
• [PATCH v1 1/1] serial: 8250_pericom: Revert "Re-enable higher baud rates"
  • From: Andy Shevchenko
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski
• [RFC PATCH] serial: core: fix tcdrain() with CTS enabled
  • From: Tomasz Moń
• Re: [PATCH v1 1/1] serial: core: Drop duplicate NULL check in uart_*shutdown()
  • From: Jiri Slaby
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Krzysztof Kozlowski
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Andrew Lunn
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Arnd Bergmann
• Re: [Openipmi-developer] [PATCH] HPE BMC GXP SUPPORT
  • From: Corey Minyard
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Verdun, Jean-Marie
• Re: [PATCH] HPE BMC GXP SUPPORT
  • From: Corey Minyard
• [PATCH v1 1/1] serial: core: Drop duplicate NULL check in uart_*shutdown()
  • From: Andy Shevchenko
• [PATCH] HPE BMC GXP SUPPORT
  • From: nick . hawkins
• Re: [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Jeremy Linton
• [PATCH v2 3/3] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Krzysztof Kozlowski
• [PATCH v2 2/3] mfd: exynos-lpass: Drop unneeded syscon.h include
  • From: Krzysztof Kozlowski
• [PATCH v2 1/3] dt-bindings: serial: samsung_uart: Document Exynos5433 compatible
  • From: Krzysztof Kozlowski
• [PATCH v2 0/3] mfd/serial: dt-bindings: samsung,exynos5433-lpass: Convert to dtschema
  • From: Krzysztof Kozlowski
• Re: [PATCH v3 5/7] dt-bindings: phy: Add compatible for Mediatek MT8186
  • From: Vinod Koul
• Re: [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Florian Fainelli
• Re: [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Jeremy Linton
• Re: [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Florian Fainelli
• [PATCH] serial: 8250_bcm2835aux: Add ACPI support
  • From: Adrien Thierry
• Re: [PATCH 4/5] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Rob Herring
• Re: [PATCH 5/5] dt-bindings: serial: samsung_uart: Document Exynos5433 compatible
  • From: Rob Herring
• Re: [BUG] tty: serial: possible deadlock in uart_remove_one_port() and uart_hangup()
  • From: Jia-Ju Bai
• [tty:tty-linus] BUILD SUCCESS c816b2e65b0e86b95011418cad334f0524fc33b8
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS 1d22c270752ea2b29b9a484e150641f852a10a6d
  • From: kernel test robot
• Re: Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Wander Costa
• Re: Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Sudip Mukherjee
• RE: response time of serdev_device
  • From: Benjamin Ulrich
• Re: (subset) [PATCH 2/5] arm64: dts: exynos: drop unneeded syscon phandle in Exynos5433 LPASS
  • From: Krzysztof Kozlowski
• Re: (subset) [PATCH 1/5] arm64: dts: exynos: align pl330 node name with dtschema
  • From: Krzysztof Kozlowski
• Re: [PATCH 4/5] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Krzysztof Kozlowski
• [tty:tty-testing] BUILD SUCCESS 4c6123873a42dc5144e4c53bb8376c14fc92336d
  • From: kernel test robot
• RE: [PATCH 5/5] dt-bindings: serial: samsung_uart: Document Exynos5433 compatible
  • From: Alim Akhtar
• RE: [PATCH 3/5] mfd: exynos-lpass: Drop unneeded syscon.h include
  • From: Alim Akhtar
• RE: [PATCH 2/5] arm64: dts: exynos: drop unneeded syscon phandle in Exynos5433 LPASS
  • From: Alim Akhtar
• RE: [PATCH 1/5] arm64: dts: exynos: align pl330 node name with dtschema
  • From: Alim Akhtar
• RE: [PATCH 1/5] arm64: dts: exynos: align pl330 node name with dtschema
  • From: Alim Akhtar
• Re: [PATCH 4/5] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Rob Herring
• [PATCH 5/5] dt-bindings: serial: samsung_uart: Document Exynos5433 compatible
  • From: Krzysztof Kozlowski
• [PATCH 3/5] mfd: exynos-lpass: Drop unneeded syscon.h include
  • From: Krzysztof Kozlowski
• [PATCH 4/5] dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  • From: Krzysztof Kozlowski
• [PATCH 2/5] arm64: dts: exynos: drop unneeded syscon phandle in Exynos5433 LPASS
  • From: Krzysztof Kozlowski
• [PATCH 1/5] arm64: dts: exynos: align pl330 node name with dtschema
  • From: Krzysztof Kozlowski
• Re: [GIT PULL] TTY/Serial driver fixes for 5.17-rc2
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial driver fixes for 5.17-rc2
  • From: Greg KH
• Re: [BUG] tty: serial: possible deadlock in uart_remove_one_port() and uart_hangup()
  • From: Jia-Ju Bai
• Re: [BUG] tty: serial: possible deadlock in uart_remove_one_port() and uart_hangup()
  • From: Greg KH
• [BUG] tty: serial: possible deadlock in uart_remove_one_port() and uart_hangup()
  • From: Jia-Ju Bai
• Re: [PATCH 2/2] arm64: dts: imx8qxp-ss-adma: Drop fsl,imx7ulp-lpuart comaptible
  • From: Shawn Guo
• Re: response time of serdev_device
  • From: Greg KH
• response time of serdev_device
  • From: Benjamin Ulrich
• Re: Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Wander Costa
• Re: Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Greg Kroah-Hartman
• Re: Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Thorsten Leemhuis
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Regression with 5021d709b31b ("tty: serial: Use fifo in 8250 console driver")
  • From: Sudip Mukherjee
• [tty:tty-linus] BUILD SUCCESS d1ad2721b1eb05d54e81393a7ebc332d4a35c68f
  • From: kernel test robot
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Theodore Y. Ts'o
• [PATCH v2 1/1] serial: 8250_exar: derive nr_ports from PCI ID for Acces I/O cards
  • From: Andy Shevchenko
• [PATCH 11/12] MAINTAINERS: add myself as Nuclei SoCs/CPUs supporter
  • From: Icenowy Zheng
• [PATCH 12/12] mailmap: add Icenowy Zheng's Nuclei mail addresses
  • From: Icenowy Zheng
• [PATCH 10/12] RISC-V: workaround Nuclei UX600 cores with broken SATP CSR
  • From: Icenowy Zheng
• [PATCH 09/12] riscv: dts: add device tree for Nuclei DemoSoC w/ UX600 on DDR200T
  • From: Icenowy Zheng
• [PATCH 08/12] dt-bindings: riscv: add binding for Nuclei platform boards
  • From: Icenowy Zheng
• [PATCH 07/12] dt-bindings: spi: add compatible string for Nuclei DemoSoC SPI
  • From: Icenowy Zheng
• [PATCH 06/12] dt-bindings: serial: add compatible string for Nuclei DemoSoC UART
  • From: Icenowy Zheng
• [PATCH 05/12] dt-bindings: interrupt-controller: add compatible string for UX600 PLIC
  • From: Icenowy Zheng
• [PATCH 04/12] dt-bindings: timer: add compatible for Nuclei UX600 CLINT-compat timer
  • From: Icenowy Zheng
• [PATCH 03/12] dt-bindings: riscv: add compatible strings for Nuclei UX600 series
  • From: Icenowy Zheng
• [PATCH 02/12] RISC-V: add Nuclei SoC Kconfig option
  • From: Icenowy Zheng
• [PATCH 01/12] dt-bindings: vendor-prefixes: add Nuclei
  • From: Icenowy Zheng
• [PATCH 00/12] Initial support for Nuclei DemoSoC w/ UX600
  • From: Icenowy Zheng
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Jiri Slaby
• Re: [PATCH] tty: Replace acpi_bus_get_device()
  • From: Jiri Slaby
• [tty:tty-linus] BUILD SUCCESS 2dd8a74fddd21b95dcc60a2d3c9eaec993419d69
  • From: kernel test robot
• [tty:tty-testing] BUILD SUCCESS e41752c0e79b033fe0ea186bba0f6bb558c49729
  • From: kernel test robot
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Tim Harvey
• [PATCH] tty: Replace acpi_bus_get_device()
  • From: Rafael J. Wysocki
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Maciej W. Rozycki
• Re: [PATCH] serial: 8250: Fix ...console_fifo_write on BCM283x
  • From: Phil Elwell
• Re: [PATCH] serial: 8250: Fix ...console_fifo_write on BCM283x
  • From: Greg Kroah-Hartman
• [PATCH] serial: 8250: Fix ...console_fifo_write on BCM283x
  • From: Phil Elwell
• Re: [PATCH v3] tty: Partially revert the removal of the Cyclades public API
  • From: kernel test robot
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Greg KH
• Re: [PATCH v2 1/1] tty: n_gsm: fix SW flow control encoding/handling
  • From: Greg KH
• Re: [PATCH v3] tty: Partially revert the removal of the Cyclades public API
  • From: Greg Kroah-Hartman
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Greg KH
• Re: [PATCH v3] tty: Partially revert the removal of the Cyclades public API
  • From: Christoph Hellwig
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
  • From: Shawn Guo
• Re: [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
  • From: Shawn Guo
• Re: [RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
  • From: Shawn Guo
• Re: [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl
  • From: Shawn Guo
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Andy Shevchenko
• Re: TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Wander Costa
• [PATCH v3] tty: Partially revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: [PATCH v2] tty: Partially revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: Add earlycon driver for Tegra Combined UART
  • From: Helmut Grohne
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Jiri Slaby
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Stephen Boyd
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Andy Shevchenko
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Andy Shevchenko
• Re: [PATCH v3 1/1] tty: serial: Use fifo in 8250 console driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH v3 1/1] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: [PATCH v3 1/1] tty: serial: Use fifo in 8250 console driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH v3 1/1] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: [PATCH v3 1/1] tty: serial: Use fifo in 8250 console driver
  • From: Sebastian Andrzej Siewior
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Matthias Schiffer
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jon Hunter
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Geert Uytterhoeven
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jiri Slaby
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Uwe Kleine-König
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Miquel Raynal
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Wander Costa
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Richard Genoud
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jon Hunter
• Re: [PATCH 5/5] spi: make remove callback a void function
  • From: Stefan Schmidt
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jiri Slaby
• Re: [PATCH 0/5] spi: make remove callback a void function
  • From: Lee Jones
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jiri Slaby
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jon Hunter
• Re: [PATCH] tty: serial: Use fifo in 8250 console driver
  • From: Jon Hunter
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Geert Uytterhoeven
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Tim Harvey
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH V6 0/5] Use CCF to describe the UART baud rate clock
  • From: Kevin Hilman
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: kernel test robot
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: kernel test robot
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Richard Genoud
• [PATCH] tty: Add support for Brainboxes UC cards.
  • From: Cameron Williams
• Re: [PATCH v2] tty: Partially revert the removal of the Cyclades public API
  • From: Christoph Hellwig
• Re: [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Richard Genoud
• Re: [PATCH 02/11] serial: atmel_serial: include circ_buf.h
  • From: Richard Genoud
• Re: [PATCH 02/11] serial: atmel_serial: include circ_buf.h
  • From: Richard Genoud
• [PATCH 05/11] mxser: fix xmit_buf leak in activate when LSR == 0xff
  • From: Jiri Slaby
• [PATCH 02/11] serial: atmel_serial: include circ_buf.h
  • From: Jiri Slaby
• [PATCH 07/11] mxser: switch from xmit_buf to kfifo
  • From: Jiri Slaby
• [PATCH 11/11] serial: mcf: use helpers in mcf_tx_chars()
  • From: Jiri Slaby
• [PATCH 10/11] serial: make uart_console_write->putchar()'s character a char
  • From: Jiri Slaby
• [PATCH 03/11] tty: add kfifo to tty_port
  • From: Jiri Slaby
• [PATCH 06/11] mxser: use tty_port xmit_buf helpers
  • From: Jiri Slaby
• [PATCH 08/11] serial: fsl_linflexuart: deduplicate character sending
  • From: Jiri Slaby
• [PATCH 09/11] serial: fsl_linflexuart: don't call uart_write_wakeup() twice
  • From: Jiri Slaby
• [PATCH 04/11] tty: tty_port_open, document shutdown vs failed activate
  • From: Jiri Slaby
• [PATCH 01/11] serial: core: clean up EXPORT_SYMBOLs
  • From: Jiri Slaby
• [PATCH 00/11] TTY patches for 5.18
  • From: Jiri Slaby
• [PATCH 0/5] spi: make remove callback a void function
  • From: Uwe Kleine-König
• [PATCH v2] tty: Partially revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: [PATCH] tty: Revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: [PATCH] Bugfix RTS line config in RS485 mode is overwritten in pl011_set_mctrl() function.
  • From: Lukas Wunner
• [PATCH 2/2] serial: core: Initialize rs485 RTS polarity already on probe
  • From: Lukas Wunner
• [PATCH 1/2] serial: pl011: Fix incorrect rs485 RTS polarity on set_mctrl
  • From: Lukas Wunner
• Re: [PATCH] fix serdev bind/unbind
  • From: Andy Shevchenko
• Re: [PATCH 02/16] dt-bindings: arm: renesas: Document SMARC EVK
  • From: Geert Uytterhoeven
• Re: [PATCH 01/16] dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC
  • From: Geert Uytterhoeven
• Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Yu Tu
• Re: [PATCH V6 4/5] tty: serial: meson: Make some bit of the REG5 register writable
  • From: Jerome Brunet
• Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Jerome Brunet
• Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Jerome Brunet
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• [PATCH v2 1/1] tty: n_gsm: fix SW flow control encoding/handling
  • From: daniel . starke
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Pali Rohár
• Re: [PATCH V6 0/5] Use CCF to describe the UART baud rate clock
  • From: Yu Tu
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Stephen Boyd
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Pali Rohár
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Stephen Boyd
• Re: [PATCH V6 0/5] Use CCF to describe the UART baud rate clock
  • From: Kevin Hilman
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Andy Shevchenko
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH] fix serdev bind/unbind
  • From: Rob Herring
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Harald Seiler
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Harald Seiler
• Re: [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• [PATCH] tty: serial: imx: Add fast path when rs485 delays are 0
  • From: Harald Seiler
• Re: [PATCH v8 2/7] ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
  • From: Rob Herring
• Re: TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Pavel Pisa
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Sergey Shtylyov
• Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Yu Tu
• RE: [PATCH 2/2] arm64: dts: imx8qxp-ss-adma: Drop fsl,imx7ulp-lpuart comaptible
  • From: Peng Fan
• RE: [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Peng Fan
• RE: [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
  • From: Peng Fan
• RE: [PATCH v2] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Peng Fan
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• [PATCH] fix serdev bind/unbind
  • From: julian schroeder
• Re: [PATCH AUTOSEL 4.4 27/29] serial: pl010: Drop CR register reset on set_termios
  • From: Lukas Wunner
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• [PATCH 2/2] arm64: dts: imx8qxp-ss-adma: Drop fsl,imx7ulp-lpuart comaptible
  • From: Abel Vesa
• [PATCH 1/2] dt-bindings: serial: fsl-lpuart: Drop i.MX8QXP backwards compatibility
  • From: Abel Vesa
• [PATCH] dt-bindings: serial: fsl-lpuart: Remove i.MX8QM from enum
  • From: Abel Vesa
• [PATCH v2] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH v8 5/7] clk: imx: Add initial support for i.MXRT1050 clock driver
  • From: Abel Vesa
• Re: [PATCH v8 4/7] dt-bindings: clock: imx: Add documentation for i.MXRT1050 clock
  • From: Abel Vesa
• Re: [PATCH v8 3/7] dt-bindings: imx: Add clock binding for i.MXRT1050
  • From: Abel Vesa
• Re: [PATCH 1/7] serial: core: Add support of runtime PM
  • From: Tony Lindgren
• Re: [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Jiri Slaby
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH V6 2/5] tty: serial: meson: Use devm_ioremap_resource to get register mapped memory
  • From: Jiri Slaby
• Re: [PATCH V6 1/5] tty: serial: meson: Move request the register region to probe
  • From: Jiri Slaby
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH AUTOSEL 4.4 28/29] serial: core: Keep mctrl register state and cached copy in sync
  • From: Greg Kroah-Hartman
• [PATCH AUTOSEL 4.4 27/29] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 28/29] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH V6 5/5] tty: serial: meson: Added S4 SOC compatibility
  • From: Yu Tu
• [PATCH V6 4/5] tty: serial: meson: Make some bit of the REG5 register writable
  • From: Yu Tu
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame
  • From: Yu Tu
• [PATCH V6 2/5] tty: serial: meson: Use devm_ioremap_resource to get register mapped memory
  • From: Yu Tu
• [PATCH V6 1/5] tty: serial: meson: Move request the register region to probe
  • From: Yu Tu
• [PATCH AUTOSEL 4.14 54/56] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH V6 0/5] Use CCF to describe the UART baud rate clock
  • From: Yu Tu
• [PATCH AUTOSEL 4.19 58/59] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 57/59] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 70/73] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 111/116] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 110/116] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 55/56] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 176/188] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 177/188] serial: pl011: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 71/73] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 027/116] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 178/188] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 5.16 207/217] serial: core: Keep mctrl register state and cached copy in sync
  • From: Sasha Levin
• [PATCH AUTOSEL 5.16 205/217] serial: pl010: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 059/188] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.16 206/217] serial: pl011: Drop CR register reset on set_termios
  • From: Sasha Levin
• [PATCH AUTOSEL 5.16 069/217] serial: 8250_dw: Add StarFive JH7100 quirk
  • From: Sasha Levin
• [PATCH AUTOSEL 5.16 070/217] tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
  • From: Sasha Levin
• Re: [PATCH] tty: Revert the removal of the Cyclades public API
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: Revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Wander Costa
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Greg Kroah-Hartman
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH V4 3/5] tty: serial: meson: The UART baud rate
  • From: Yu Tu
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH V4 3/5] tty: serial: meson: The UART baud rate
  • From: Jerome Brunet
• [PATCH v3] serial: imx: reduce RX interrupt frequency
  • From: Tomasz Moń
• TTY layer discussion about generic FIFO depth and Rx iddle timeout control
  • From: Pavel Pisa
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: liteuart: fix MODULE_ALIAS
  • From: Stafford Horne
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional (summary)
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Pali Rohár
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Marek Behún
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Pali Rohár
• Re: [PATCH] tty: Revert the removal of the Cyclades public API
  • From: Greg Kroah-Hartman
• Re: [PATCH v7 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock
  • From: Stephen Boyd
• Re: [PATCH 06/16] dt-bindings: serial: renesas,scif: Document RZ/V2L SoC
  • From: Lad, Prabhakar
• Re: [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Pali Rohár
• Re: [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Stephen Boyd
• Re: [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Pali Rohár
• Re: [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Stephen Boyd
• [PATCH] tty: Revert the removal of the Cyclades public API
  • From: Maciej W. Rozycki
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [RESEND] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Andy Shevchenko
• Re: [PATCH v2] serial: imx: reduce RX interrupt frequency
  • From: Tomasz Moń
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH v7 0/6] serial: mvebu-uart: Support for higher baudrates
  • From: Pali Rohár
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• [PATCH] tty: serial: max3100: Remove redundant 'flush_workqueue()' calls
  • From: Xu Wang
• [PATCH v2] serial: imx: reduce RX interrupt frequency
  • From: Tomasz Moń
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Peter Korsgaard
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Tomasz Moń
• Re: Modem control lines for RTSCTS hardware flow control via rts-gpio and cts-gpio with IMX
  • From: Tim Harvey
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Florian Fainelli
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Guenter Roeck
• Re: [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Mark Brown
• [PATCH] driver core: platform: Rename platform_get_irq_optional() to platform_get_irq_silent()
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Mark Brown
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Jiri Slaby
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Re: [PATCH] Bugfix RTS line config in RS485 mode is overwritten in pl011_set_mctrl() function.
  • From: Greg KH
• Re: [PATCH] Bugfix RTS line config in RS485 mode is overwritten in pl011_set_mctrl() function.
  • From: Jochen Mades
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Jiri Slaby
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: hammer hsieh
• Re: Re: [PATCH] tty/serial: Check for null pointer after calling devm_ioremap
  • From: Jiasheng Jiang
• Re: [PATCH v2] tty/serial: Check for null pointer after calling devm_ioremap
  • From: Jiri Slaby
• Re: [PATCH V5 2/5] tty: serial: meson: Move request the register region.
  • From: Jiri Slaby
• Re: [PATCH V3] tty: serial: fsl_lpuart: count tty buffer overruns
  • From: Jiri Slaby
• Re: [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Jiri Slaby
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Mark Brown
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH V4 3/5] tty: serial: meson: The UART baud rate
  • From: kernel test robot
• [PATCH] serial: 8250: of: Fix mapped region size when using reg-offset property
  • From: Robert Hancock
• Re: [GIT PULL] TTY/Serial driver changes for 5.17-rc1
  • From: pr-tracker-bot
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko
• Re: [PATCH V4 3/5] tty: serial: meson: The UART baud rate
  • From: kernel test robot
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Hans de Goede
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Rafael J. Wysocki
• [GIT PULL] TTY/Serial driver changes for 5.17-rc1
  • From: Greg KH
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Andrew Lunn
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Andy Shevchenko
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• [PATCH v6 2/2] serial:sunplus-uart:Add Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v6 1/2] dt-bindings:serial:Add bindings doc for Sunplus SoC UART Driver
  • From: Hammer Hsieh
• [PATCH v6 0/2] Add UART driver for Suplus SP7021 SoC
  • From: Hammer Hsieh
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Uwe Kleine-König
• Re: [PATCH 1/2] platform: make platform_get_irq_optional() optional
  • From: Geert Uytterhoeven
• Re: [PATCH] Bugfix RTS line config in RS485 mode is overwritten in pl011_set_mctrl() function.
  • From: Lino Sanfilippo
• Re: [PATCH v7 0/7] Add initial support for the i.MXRTxxxx SoC family starting from i.IMXRT1050 SoC.
  • From: Jesse Taube
• [PATCH v8 7/7] ARM: imxrt_defconfig: Add i.MXRT family defconfig
  • From: Jesse Taube
• [PATCH v8 4/7] dt-bindings: clock: imx: Add documentation for i.MXRT1050 clock
  • From: Jesse Taube
• [PATCH v8 6/7] ARM: dts: imx: Add i.MXRT1050-EVK support
  • From: Jesse Taube