On 22-01-26 20:47:33, Shawn Guo wrote:
> On Thu, Dec 16, 2021 at 08:48:09PM +0200, Abel Vesa wrote:
> > From: Jacky Bai <ping.bai@xxxxxxx>
> >
> > On i.MX8DXL, the Connectivity subsystem includes below peripherals:
> > 1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG,
> > 1x eMMC, 2x SD, 1x NAND.
> >
> > Signed-off-by: Jacky Bai <ping.bai@xxxxxxx>
> > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
> > ---
> > .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 ++++++++++++++++++
> > 1 file changed, 137 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> > new file mode 100644
> > index 000000000000..b0059296a03f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> > @@ -0,0 +1,137 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2021 NXP
> > + */
>
> Shouldn't we include imx8-ss-conn.dtsi here? Otherwise, the
> /delete-node/ and &conn_subsys reference below looks baseless.
>
Nope. The way this works is: imx8dxl.dtsi includes both
imx8-ss-conn.dtsi (the generic part) and imx8dxl-ss-conn.dtsi
(the imx8dxl specific part), in this exact order.
And same does imx8qxp.dtsi. It includes the imx8-ss-conn.dtsi
(the generic part) and then includes imx8qxp-ss-conn.dtsi
(the imx8qxp specific part). And so on.
All other comments will be addressed in the next version of this
patchset.
> > +
> > +/delete-node/ &enet1_lpcg;
> > +/delete-node/ &fec2;
> > +
> > +&conn_subsys {
> > + conn_enet0_root_clk: clock-conn-enet0-root {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <250000000>;
> > + clock-output-names = "conn_enet0_root_clk";
> > + };
> > +
> > + eqos: ethernet@5b050000 {
> > + compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
> > + reg = <0x5b050000 0x10000>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "eth_wake_irq", "macirq";
> > + clocks = <&eqos_lpcg IMX_LPCG_CLK_2>,
> > + <&eqos_lpcg IMX_LPCG_CLK_4>,
> > + <&eqos_lpcg IMX_LPCG_CLK_0>,
> > + <&eqos_lpcg IMX_LPCG_CLK_3>,
> > + <&eqos_lpcg IMX_LPCG_CLK_1>;
> > + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
> > + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
> > + assigned-clock-rates = <125000000>;
> > + power-domains = <&pd IMX_SC_R_ENET_1>;
> > + clk_csr = <0>;
>
> Is this property documented anywhere?
>
> > + status = "disabled";
> > + };
> > +
> > + usbotg2: usb@5b0e0000 {
> > + compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
> > + reg = <0x5b0e0000 0x200>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> > + fsl,usbphy = <&usbphy2>;
> > + fsl,usbmisc = <&usbmisc2 0>;
> > + /*
> > + * usbotg1 and usbotg2 share one clcok
>
> s/clcok/clock
>
> > + * scfw disable clock access and keep it always on
> > + * in case other core (M4) use one of these.
> > + */
> > + clocks = <&clk_dummy>;
> > + ahb-burst-config = <0x0>;
> > + tx-burst-size-dword = <0x10>;
> > + rx-burst-size-dword = <0x10>;
> > + #stream-id-cells = <1>;
> > + power-domains = <&pd IMX_SC_R_USB_1>;
> > + status = "disabled";
> > + };
> > +
> > + usbmisc2: usbmisc@5b0e0200 {
> > + #index-cells = <1>;
> > + compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc";
> > + reg = <0x5b0e0200 0x200>;
> > + };
> > +
> > + usbphy2: usbphy@0x5b110000 {
> > + compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
> > + reg = <0x5b110000 0x1000>;
> > + clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
> > + status = "disabled";
> > + };
> > +
> > + eqos_lpcg: clock-controller@5b240000 {
> > + compatible = "fsl,imx8qxp-lpcg";
> > + reg = <0x5b240000 0x10000>;
> > + #clock-cells = <1>;
> > + clocks = <&conn_enet0_root_clk>,
> > + <&conn_axi_clk>,
> > + <&conn_axi_clk>,
> > + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
> > + <&conn_ipg_clk>;
> > + clock-indices = <IMX_LPCG_CLK_0>,
> > + <IMX_LPCG_CLK_2>,
> > + <IMX_LPCG_CLK_4>,
> > + <IMX_LPCG_CLK_5>,
> > + <IMX_LPCG_CLK_6>;
> > + clock-output-names = "eqos_ptp",
> > + "eqos_mem_clk",
> > + "eqos_aclk",
> > + "eqos_clk",
> > + "eqos_csr_clk";
> > + power-domains = <&pd IMX_SC_R_ENET_1>;
> > + };
> > +
> > + usb2_2_lpcg: clock-controller@5b280000 {
> > + compatible = "fsl,imx8qxp-lpcg";
> > + reg = <0x5b280000 0x10000>;
> > + #clock-cells = <1>;
> > +
>
> Unneeded newline.
>
> Shawn
>
> > + clock-indices = <IMX_LPCG_CLK_7>;
> > + clocks = <&conn_ipg_clk>;
> > + clock-output-names = "usboh3_2_phy_ipg_clk";
> > + };
> > +
> > +};
> > +
> > +&enet0_lpcg {
> > + clocks = <&conn_enet0_root_clk>,
> > + <&conn_enet0_root_clk>,
> > + <&conn_axi_clk>,
> > + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
> > + <&conn_ipg_clk>,
> > + <&conn_ipg_clk>;
> > +};
> > +
> > +&fec1 {
> > + compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec";
> > + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> > + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
> > + assigned-clock-rates = <125000000>;
> > +};
> > +
> > +&usdhc1 {
> > + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> > + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> > +};
> > +
> > +&usdhc2 {
> > + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> > + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> > +};
> > +
> > +&usdhc3 {
> > + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> > +};
> > --
> > 2.31.1
> >
