In the similar way how it's done in 8250_pericom, derive the number of
the UART ports from PCI ID for Acces I/O cards.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
v2: fixed variable name (Ilpo)
drivers/tty/serial/8250/8250_exar.c | 37 ++++++++++-------------------
1 file changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index a4508ac0cac9..a243f36c41fa 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -611,7 +611,12 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3);
- nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;
+ if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+ nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
+ else if (board->num_ports)
+ nr_ports = board->num_ports;
+ else
+ nr_ports = pcidev->device & 0x0f;
priv = devm_kzalloc(&pcidev->dev, struct_size(priv, line, nr_ports), GFP_KERNEL);
if (!priv)
@@ -710,22 +715,6 @@ static int __maybe_unused exar_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
-static const struct exar8250_board acces_com_2x = {
- .num_ports = 2,
- .setup = pci_xr17c154_setup,
-};
-
-static const struct exar8250_board acces_com_4x = {
- .num_ports = 4,
- .setup = pci_xr17c154_setup,
-};
-
-static const struct exar8250_board acces_com_8x = {
- .num_ports = 8,
- .setup = pci_xr17c154_setup,
-};
-
-
static const struct exar8250_board pbn_fastcom335_2 = {
.num_ports = 2,
.setup = pci_fastcom335_setup,
@@ -810,13 +799,13 @@ static const struct exar8250_board pbn_exar_XR17V8358 = {
}
static const struct pci_device_id exar_pci_tbl[] = {
- EXAR_DEVICE(ACCESSIO, COM_2S, acces_com_2x),
- EXAR_DEVICE(ACCESSIO, COM_4S, acces_com_4x),
- EXAR_DEVICE(ACCESSIO, COM_8S, acces_com_8x),
- EXAR_DEVICE(ACCESSIO, COM232_8, acces_com_8x),
- EXAR_DEVICE(ACCESSIO, COM_2SM, acces_com_2x),
- EXAR_DEVICE(ACCESSIO, COM_4SM, acces_com_4x),
- EXAR_DEVICE(ACCESSIO, COM_8SM, acces_com_8x),
+ EXAR_DEVICE(ACCESSIO, COM_2S, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM_4S, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM_8S, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM232_8, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM_2SM, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM_4SM, pbn_exar_XR17C15x),
+ EXAR_DEVICE(ACCESSIO, COM_8SM, pbn_exar_XR17C15x),
CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
--
2.34.1
