Provide information in the kernel log as to what configuration option to
enable for PCI UART devices that have been blacklisted in the generic
PCI 8250 UART driver and which have a dedicated driver available to
handle that has been disabled. The rationale is there is no easy way
for the user to map a specific PCI vendor:device pair to an individual
dedicated driver while the generic driver has this information readily
available and it will likely be confusing that the generic driver does
not register such a port.
A message is then printed like:
serial 0000:04:00.3: ignoring port, enable SERIAL_8250_PERICOM to handle
when an affected device is encountered and the generic driver rejects it.
Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
---
Hi,
Verified in a simulated environment as obviously I don't have a Pericom
device.
Maciej
---
drivers/tty/serial/8250/8250_pci.c | 67 ++++++++++++++++++++++---------------
1 file changed, 40 insertions(+), 27 deletions(-)
linux-serial-8250-pci-blacklist-config.diff
Index: linux-macro/drivers/tty/serial/8250/8250_pci.c
===================================================================
--- linux-macro.orig/drivers/tty/serial/8250/8250_pci.c
+++ linux-macro/drivers/tty/serial/8250/8250_pci.c
@@ -3518,6 +3518,12 @@ static struct pciserial_board pci_boards
},
};
+#define REPORT_CONFIG(option) \
+ (IS_ENABLED(CONFIG_##option) ? 0 : (kernel_ulong_t)&#option)
+#define REPORT_8250_CONFIG(option) \
+ (IS_ENABLED(CONFIG_SERIAL_8250_##option) ? \
+ 0 : (kernel_ulong_t)&"SERIAL_8250_"#option)
+
static const struct pci_device_id blacklist[] = {
/* softmodems */
{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
@@ -3525,40 +3531,43 @@ static const struct pci_device_id blackl
{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
/* multi-io cards handled by parport_serial */
- { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
- { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
- { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
+ /* WCH CH353 2S1P */
+ { PCI_DEVICE(0x4348, 0x7053), REPORT_CONFIG(PARPORT_SERIAL), },
+ /* WCH CH353 1S1P */
+ { PCI_DEVICE(0x4348, 0x5053), REPORT_CONFIG(PARPORT_SERIAL), },
+ /* WCH CH382 2S1P */
+ { PCI_DEVICE(0x1c00, 0x3250), REPORT_CONFIG(PARPORT_SERIAL), },
/* Intel platforms with MID UART */
- { PCI_VDEVICE(INTEL, 0x081b), },
- { PCI_VDEVICE(INTEL, 0x081c), },
- { PCI_VDEVICE(INTEL, 0x081d), },
- { PCI_VDEVICE(INTEL, 0x1191), },
- { PCI_VDEVICE(INTEL, 0x18d8), },
- { PCI_VDEVICE(INTEL, 0x19d8), },
+ { PCI_VDEVICE(INTEL, 0x081b), REPORT_8250_CONFIG(MID), },
+ { PCI_VDEVICE(INTEL, 0x081c), REPORT_8250_CONFIG(MID), },
+ { PCI_VDEVICE(INTEL, 0x081d), REPORT_8250_CONFIG(MID), },
+ { PCI_VDEVICE(INTEL, 0x1191), REPORT_8250_CONFIG(MID), },
+ { PCI_VDEVICE(INTEL, 0x18d8), REPORT_8250_CONFIG(MID), },
+ { PCI_VDEVICE(INTEL, 0x19d8), REPORT_8250_CONFIG(MID), },
/* Intel platforms with DesignWare UART */
- { PCI_VDEVICE(INTEL, 0x0936), },
- { PCI_VDEVICE(INTEL, 0x0f0a), },
- { PCI_VDEVICE(INTEL, 0x0f0c), },
- { PCI_VDEVICE(INTEL, 0x228a), },
- { PCI_VDEVICE(INTEL, 0x228c), },
- { PCI_VDEVICE(INTEL, 0x4b96), },
- { PCI_VDEVICE(INTEL, 0x4b97), },
- { PCI_VDEVICE(INTEL, 0x4b98), },
- { PCI_VDEVICE(INTEL, 0x4b99), },
- { PCI_VDEVICE(INTEL, 0x4b9a), },
- { PCI_VDEVICE(INTEL, 0x4b9b), },
- { PCI_VDEVICE(INTEL, 0x9ce3), },
- { PCI_VDEVICE(INTEL, 0x9ce4), },
+ { PCI_VDEVICE(INTEL, 0x0936), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x0f0a), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x0f0c), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x228a), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x228c), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b96), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b97), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b98), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b99), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b9a), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x4b9b), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x9ce3), REPORT_8250_CONFIG(LPSS), },
+ { PCI_VDEVICE(INTEL, 0x9ce4), REPORT_8250_CONFIG(LPSS), },
/* Exar devices */
- { PCI_VDEVICE(EXAR, PCI_ANY_ID), },
- { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
+ { PCI_VDEVICE(EXAR, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), },
+ { PCI_VDEVICE(COMMTECH, PCI_ANY_ID), REPORT_8250_CONFIG(EXAR), },
/* Pericom devices */
- { PCI_VDEVICE(PERICOM, PCI_ANY_ID), },
- { PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), },
+ { PCI_VDEVICE(PERICOM, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), },
+ { PCI_VDEVICE(ACCESSIO, PCI_ANY_ID), REPORT_8250_CONFIG(PERICOM), },
/* End of the black list */
{ }
@@ -3840,8 +3849,12 @@ pciserial_init_one(struct pci_dev *dev,
board = &pci_boards[ent->driver_data];
exclude = pci_match_id(blacklist, dev);
- if (exclude)
+ if (exclude) {
+ if (exclude->driver_data)
+ pci_warn(dev, "ignoring port, enable %s to handle\n",
+ (const char *)exclude->driver_data);
return -ENODEV;
+ }
rc = pcim_enable_device(dev);
pci_save_state(dev);
