Linux SCSI

• Thread Index

• [PATCH] scsi: bfa: Drop redundant memset
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• [PATCH] scsi: qla4xxx: Drop redundant memset
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• Re: [PATCH 2/4] xen/scsiback: use new command result macros
  • From: Juergen Gross <jgross@xxxxxxxx>
• [Bug 215788] arcmsr driver on kernel 5.16 and up fails to initialize ARC-1280ML RAID controller
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [RFC PATCH] scsi: ses: Fix out-of-bound write at ses_enclosure_data_process()
  • From: Tianchen Ding <dtcccc@xxxxxxxxxxxxxxxxx>
• Antw: [EXT] Re: [PATCH v2] scsi: iscsi: Fix multiple iscsi session unbind event sent to userspace
  • From: "Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• [PATCH v5] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• [PATCH] scsi: ufs: Increase fDeviceInit poll frequency
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] blk-crypto: fix the blk_crypto_profile liftime
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 2/2] qla2xxx: Fix missed DMA unmap for aborted cmds
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v4 7/8] mpi3mr: add support for nvme pass-through
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v2] scsi: iscsi: Fix multiple iscsi session unbind event sent to userspace
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH 4/4] xen/scsifront: harden driver against malicious backend
  • From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
• Re: [PATCH 2/4] xen/scsiback: use new command result macros
  • From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 03/18] xen/scsifront: remove unused GRANT_INVALID_REF definition
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 00/18] xen: simplify frontend side ring setup
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 15/18] xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
  • From: Juergen Gross <jgross@xxxxxxxx>
• Re: [PATCH 2/2] qla2xxx: Fix missed DMA unmap for aborted cmds
  • From: Chesnokov Gleb <Chesnokov.G@xxxxxxxxxx>
• Re: [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 4/4] scsi: hisi_sas: Use libsas internal abort support
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 3/4] scsi: pm8001: Use libsas internal abort support
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 2/4] scsi: libsas: Add sas_execute_internal_abort_dev()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 1/4] scsi: libsas: Add sas_execute_internal_abort_single()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 05/14] scsi: core: Cache VPD pages b0, b1, b2
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 04/14] scsi: core: Pick suitable allocation length in scsi_report_opcode()
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH 01/14] scsi: mpt3sas: Use cached ATA Information VPD page
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [RFC PATCH v2 5/6] ufs: use PM OPP when scaling gears
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] blk-crypto: fix the blk_crypto_profile liftime
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 1/4] xen: update vscsiif.h
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 3/4] xen/scsifront: use new command result macros
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 2/4] xen/scsiback: use new command result macros
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 4/4] xen/scsifront: harden driver against malicious backend
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH 0/4] xen/pv-scsi: update header and harden frontend
  • From: Juergen Gross <jgross@xxxxxxxx>
• [PATCH] scsi: ufs: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH 1/2] blk-crypto: merge blk-crypto-sysfs.c into blk-crypto-profile.c
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 2/2] blk-crypto: fix the blk_crypto_profile liftime
  • From: Christoph Hellwig <hch@xxxxxx>
• fix blk_crypto_profile liftetime
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [PATCH v2 2/5] scsi: ufshpb: Remove 0 assignment for enum value
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• RE: [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• RE: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• Re: [RFC PATCH v2 4/6] PM: opp: allow control of multiple clocks
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH v4 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 3/7] ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 7/7] arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 5/7] scsi: MAINTAINERS: Add maintainer for Renesas UFS driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v4 6/8] mpi3mr: expose adapter state to sysfs
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v4 5/8] mpi3mr: add support for PEL commands
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 20/28] scsi: ufs: Remove locking from around single register writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 26/28] scsi: ufs: Split the ufshcd.h header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 25/28] scsi: ufs: Minimize #include directives
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 23/28] scsi: ufs: Remove unnecessary ufshcd-crypto.h include directives
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 28/28] scsi: ufs: Move the ufs_is_valid_unit_desc_lun() definition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 21/28] scsi: ufs: Introduce ufshcd_clkgate_delay_set()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 24/28] scsi: ufs: Fix kernel-doc syntax in ufshcd.h
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 27/28] scsi: ufs: Move the struct ufs_ref_clk definition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 22/28] scsi: ufs: qcom: Fix ufs_qcom_resume()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 19/28] scsi: ufs: Remove the TRUE and FALSE definitions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 18/28] scsi: ufs: Remove paths from source code comments
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 17/28] scsi: ufs: Use an SPDX license identifier in the Kconfig file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 16/28] scsi: ufs: Rename sdev_ufs_device into ufs_device_wlun
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 12/28] scsi: ufs: Remove unused constants and code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 13/28] scsi: ufs: Switch to aggregate initialization
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 11/28] scsi: ufs: Invert the return value of ufshcd_is_hba_active()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 14/28] scsi: ufs: Make the config_scaling_param calls type safe
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 15/28] scsi: ufs: Remove the driver version
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 10/28] scsi: ufs: Declare the quirks array const
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 06/28] scsi: ufs: Remove ufshcd_lrb.sense_buffer
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 07/28] scsi: ufs: Use get_unaligned_be16() instead of be16_to_cpup()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 09/28] scsi: ufs: Rename struct ufs_dev_fix into ufs_dev_quirk
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 08/28] scsi: ufs: Remove the UFS_FIX() and END_FIX() macros
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 05/28] scsi: ufs: Remove ufshcd_lrb.sense_bufflen
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 04/28] scsi: ufs: Simplify statements that return a boolean
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 03/28] scsi: ufs: Remove superfluous boolean conversions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 02/28] scsi: ufs: Declare ufshcd_wait_for_register() static
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 01/28] scsi: ufs: Fix a spelling error in a source code comment
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 00/28] Split the ufshcd.h header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 28/29] scsi: ufs: Move the ufs_is_valid_unit_desc_lun() definition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 28/29] scsi: ufs: Move the ufs_is_valid_unit_desc_lun() definition
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH v2 29/29] scsi: ufs: Split the drivers/scsi/ufs directory
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 2/2] qla2xxx: Fix missed DMA unmap for aborted cmds
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 1/2] qla2xxx: Remove free_sg command flag
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v4 4/8] mpi3mr: add support for MPT commands
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 5/5] scsi: ufshpb: Cleanup ufshpb_suspend/resume
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 0/5] Several changes for UFSHPB
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 3/5] scsi: ufshpb: Cleanup the handler when device reset HPB information
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v2 2/5] scsi: ufshpb: Remove 0 assignment for enum value
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH AUTOSEL 5.10 15/18] scsi: qedi: Fix failed disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 13/14] scsi: qedi: Fix failed disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 22/27] scsi: qedi: Fix failed disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 21/27] scsi: iscsi: Fix NOP handling during conn recovery
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 20/27] scsi: iscsi: Merge suspend fields
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 18/27] scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 19/27] scsi: iscsi: Release endpoint ID when its freed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 17/27] scsi: iscsi: Move iscsi_ep_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 27/34] scsi: qedi: Fix failed disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 25/34] scsi: iscsi: Merge suspend fields
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 26/34] scsi: iscsi: Fix NOP handling during conn recovery
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 24/34] scsi: iscsi: Release endpoint ID when its freed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 23/34] scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 22/34] scsi: iscsi: Move iscsi_ep_disconnect()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v4 3/8] mpi3mr: move data structures/definitions from MPI headers to uapi header
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v4 2/8] mpi3mr: add support for driver commands
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [RFC PATCH v2 5/6] ufs: use PM OPP when scaling gears
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: opp: accept array of frequencies
  • From: Rob Herring <robh@xxxxxxxxxx>
• LSF/MM/BPF 2022: Running BOF
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] scsi: ufs: Increase the UIC command timeout to 5 seconds
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [Question] SCSI_EH: How does EH guarantee there is no UAF of scsi_cmnd if host reset failed
  • From: Hannes Reinecke <hare@xxxxxxx>
• [Question] SCSI_EH: How does EH guarantee there is no UAF of scsi_cmnd if host reset failed
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• Re: [PATCH 27/27] direct-io: remove random prefetches
  • From: David Sterba <dsterba@xxxxxxx>
• [PATCH v3 3/7] ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: Anand Jain <anand.jain@xxxxxxxxxx>
• [PATCH v3 7/7] arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 5/7] scsi: MAINTAINERS: Add maintainer for Renesas UFS driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v3 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: (subset) [PATCH v3 09/12] arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS
  • From: Wei Xu <xuwei5@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v3 09/12] arm64: dts: hisilicon: align 'freq-table-hz' with dtschema in UFS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] scsi: target: core: Silence the message about unknown VPD pages
  • From: Konstantin Shelekhin <k.shelekhin@xxxxxxxxx>
• Re: [PATCH v2 29/29] scsi: ufs: Split the drivers/scsi/ufs directory
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH] scsi: lpfc: Remove unneeded variable
  • From: cgel.zte@xxxxxxxxx
• Re: 5.17.0 boot issue on Miata
  • From: Bob Tracy <rct@xxxxxxxx>
• Re: [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: target: core: Silence the message about unknown VPD pages
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: increase max device queue_depth to 4096
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: fcoe: simplify if-if to if-else
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: pmcraid: Remove unneeded semicolon
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 00/26] lpfc: Update lpfc to revision 14.2.0.2
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH] scsi: lpfc: fix error check return value of debugfs_create_file()
  • From: cgel.zte@xxxxxxxxx
• [PATCH v1 1/1] scsi: ufs: Increase the UIC command timeout to 5 seconds
  • From: "Bao D. Nguyen" <quic_nguyenb@xxxxxxxxxxx>
• [PATCH] scsi: target: core: Silence the message about unknown VPD pages
  • From: Konstantin Shelekhin <k.shelekhin@xxxxxxxxx>
• Re: [PATCH v4] scsi: target: tcmu: Fix possible data corruption
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• Re: [PATCH v2 29/29] scsi: ufs: Split the drivers/scsi/ufs directory
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 5/8] scsi: sd_zbc: Hide gap zones
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 3/8] scsi: sd_zbc: Verify that the zone size is a power of two
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/8] scsi: sd_zbc: Introduce struct zoned_disk_info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: use block_device based APIs in block layer consumers v3
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: ufs: mediatek,ufs: add compatible for MT8195 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] megaraid: fix error check return value of register_chrdev()
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH 6/8] scsi_debug: Fix a typo
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] scsi: sd_zbc: Hide gap zones
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] scsi: sd_zbc: Introduce struct zoned_disk_info
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] scsi: sd_zbc: Verify that the zone size is a power of two
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] scsi: sd_zbc: Rename a local variable
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] scsi: sd_zbc: Improve source code documentation
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH v2] scsi: iscsi: Fix multiple iscsi session unbind event sent to userspace
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH v4] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.18-rc2
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SCSI fixes for 5.18-rc2
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.9 2/7] scsi: lpfc: Fix queue failures when recovering from PCI parity error
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 1/1] scsi: ufs: add clock-scalable property for clk scaling
  • From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>
• Re: [PATCH v4 1/1] scsi: Fix racing between dev init and dev reset
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [f2fs-dev] [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Chao Yu <chao@xxxxxxxxxx>
• [PATCH 2/8] scsi: sd_zbc: Rename a local variable
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 3/8] scsi: sd_zbc: Verify that the zone size is a power of two
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 7/8] scsi_debug: Rename zone type constants
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 0/8] Support zoned devices with gap zones
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/8] scsi: sd_zbc: Improve source code documentation
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 6/8] scsi_debug: Fix a typo
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 5/8] scsi: sd_zbc: Hide gap zones
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 4/8] scsi: sd_zbc: Introduce struct zoned_disk_info
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 8/8] scsi_debug: Add gap zone support
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3] scsi: target: tcmu: Fix possible data corruption
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: ufs: mediatek,ufs: add compatible for MT8195 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: [RFC] scsi_transport_fc: Add an additional flag to fc_host_fpin_rcv()
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: Problems removing ramdisk backed luns
  • From: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• [PATCH v3] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iscsi: set session to FREE state after unbind session in remove session
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v2] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• [PATCH 2/2] qla2xxx: Fix missed DMA unmap for aborted cmds
  • From: Chesnokov Gleb <Chesnokov.G@xxxxxxxxxx>
• [PATCH 1/2] qla2xxx: Remove free_sg command flag
  • From: Chesnokov Gleb <Chesnokov.G@xxxxxxxxxx>
• Re: [PATCH v2] scsi: target: tcmu: Fix possible data corruption
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• [PATCH] scsi: efct: Remove unnecessary memset when using kzalloc()
  • From: Haowen Bai <baihaowen@xxxxxxxxx>
• Re: [PATCH 2/2] iscsi: set session to FREE state after unbind session in remove session
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: iscsi: introduce session UNBOUND state to avoid multiple unbind event
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• RE: [PATCH 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• [PATCH v4 1/1] scsi: Fix racing between dev init and dev reset
  • From: Alice Chao <alice.chao@xxxxxxxxxxxx>
• Re: [PATCH v3 1/1] scsi: Fix racing between dev init and dev reset
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• Re: [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 23/27] block: add a bdev_max_discard_sectors helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 22/27] block: refactor discard bio size limiting
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 14/27] block: add a bdev_stable_writes helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 13/27] block: add a bdev_fua helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 12/27] block: add a bdev_write_cache helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 11/27] block: add a bdev_nonrot helper
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 03/27] target: fix discard alignment on partitions
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction
  • From: Chaitanya Kulkarni <chaitanyak@xxxxxxxxxx>
• Re: [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 27/27] direct-io: remove random prefetches
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/27] target: fix discard alignment on partitions
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 27/27] direct-io: remove random prefetches
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/27] block: remove queue_discard_alignment
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 25/27] block: add a bdev_discard_granularity helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/27] block: refactor discard bio size limiting
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 13/27] block: add a bdev_fua helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/27] block: add a bdev_stable_writes helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 21/27] block: move {bdev,queue_limit}_discard_alignment out of line
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/27] block: add a bdev_write_cache helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/27] block: add a bdev_nonrot helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/27] ntfs3: use bdev_logical_block_size instead of open coding it
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/27] drbd: cleanup decide_on_discard_support
  • From: Christoph Hellwig <hch@xxxxxx>
• use block_device based APIs in block layer consumers v3
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/27] drbd: remove assign_p_sizes_qlim
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/27] drbd: use bdev_alignment_offset instead of queue_alignment_offset
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/27] drbd: use bdev based limit helpers in drbd_send_sizes
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [PATCH v1 0/4] several UFSHPB changes
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• [PATCH v3 1/1] scsi: Fix racing between dev init and dev reset
  • From: Alice Chao <alice.chao@xxxxxxxxxxxx>
• [no subject]
  • From: Alice Chao <alice.chao@xxxxxxxxxxxx>
• [RFC PATCH] scsi: ses: Fix out-of-bound write at ses_enclosure_data_process()
  • From: Tianchen Ding <dtcccc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 3/4] scsi: ufshpb: Cleanup the handler when device reset HPB information
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 4/4] scsi: ufshpb: Add device reset HPB regions Infor handling for HPB device mode
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 2/4] scsi: ufshpb: Remove 0 assignment for enum value
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 1/4] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH v1 0/4] several UFSHPB changes
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: Problems removing ramdisk backed luns
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Problems removing ramdisk backed luns
  • From: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] dt-bindings: ufs: common: add OPP table
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iscsi: set session to FREE state after unbind session in remove session
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/6] dt-bindings: clock: qcom,gcc-sdm845: add parent power domain
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] scsi: iscsi: introduce session UNBOUND state to avoid multiple unbind event
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] dt-bindings: ufs: common: add OPP table
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v2 19/29] scsi: ufs: Remove the TRUE and FALSE definitions
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v2 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH v2 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH] scsi: increase max device queue_depth to 4096
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] scsi: Fix racing between dev init and dev reset
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC] scsi_transport_fc: Add an additional flag to fc_host_fpin_rcv()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• RE: [PATCH] qla2xxx: Add an additional flag to fc_host_fpin_rcv()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• [PATCH] qla2xxx: Add an additional flag to fc_host_fpin_rcv()
  • From: Nilesh Javali <njavali@xxxxxxxxxxx>
• RE: [PATCH v2 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>
• RE: [PATCH v2 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: "Alim Akhtar" <alim.akhtar@xxxxxxxxxxx>
• [RESEND][PATCH] scsi: dc395x: fix a missing check on list iterator
  • From: Xiaomeng Tong <xiam0nd.tong@xxxxxxxxx>
• Re: [PATCH v2] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• [PATCH v2 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 5/7] scsi: MAINTAINERS: Add maintainer for Renesas UFS driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 3/7] ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 1/1] Add printk indexing to scsi drivers.
  • From: Jonathan Lassoff <jof@xxxxxxxxxx>
• [PATCH 0/1] Rebase: Add printk indexing to scsi drivers.
  • From: Jonathan Lassoff <jof@xxxxxxxxxx>
• RE: [PATCH v2 04/29] scsi: ufs: Simplify statements that return a boolean
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• [PATCH 1/1] Add printk indexing to scsi drivers.
  • From: Jonathan Lassoff <jof@xxxxxxxxxx>
• [PATCH 0/1] Rebase: Add printk indexing to scsi drivers.
  • From: Jonathan Lassoff <jof@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 1/1] dm-mpath: do not fail paths on ALUA state transitioning state
  • From: Brian Bunker <brian@xxxxxxxxxxxxxxx>
• Re: [PATCH 20/26] lpfc: Fix field overload in lpfc_iocbq data structure
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 8/8] mpi3mr: update driver version to 8.0.0.69.0
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 7/8] mpi3mr: add support for nvme pass-through
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 6/8] mpi3mr: expose adapter state to sysfs
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 5/8] mpi3mr: add support for PEL commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 4/8] mpi3mr: add support for MPT commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 3/8] mpi3mr: move data structures/definitions from MPI headers to uapi header
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 2/8] mpi3mr: add support for driver commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 1/8] mpi3mr: add BSG device support
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v4 0/8] mpi3mr: add BSG interface support for controller management
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Bean Huo <huobean@xxxxxxxxx>
• [PATCH 2/2] iscsi: set session to FREE state after unbind session in remove session
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH 1/2] scsi: iscsi: introduce session UNBOUND state to avoid multiple unbind event
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH 0/2] Fix multiple iscsi session unbind event sent to userspace
  • From: Wenchao Hao <haowenchao@xxxxxxxxxx>
• [PATCH] scsi: sr: add handling of memory allocation failure in get_capabilities
  • From: Enze Li <lienze@xxxxxxxxxx>
• Re: [PATCH] scsi: mpi3mr: Fix an error code when probing the driver
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [RFC PATCH v2 4/6] PM: opp: allow control of multiple clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] scsi: Fix racing between dev init and dev reset
  • From: Alice Chao <alice.chao@xxxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v2 06/29] scsi: ufs: Remove ufshcd_lrb.sense_buffer
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• RE: [PATCH v2 01/29] scsi: ufs: Fix a spelling error in a source code comment
  • From: Avri Altman <Avri.Altman@xxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Peter Wang <peter.wang@xxxxxxxxxxxx>
• Re: [PATCH v2 04/29] scsi: ufs: Simplify statements that return a boolean
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [PATCH v2 04/29] scsi: ufs: Simplify statements that return a boolean
  • From: Keoseong Park <keosung.park@xxxxxxxxxxx>
• RE: [PATCH 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• RE: [PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v2 07/29] scsi: ufs: Use get_unaligned_be16() instead of be16_to_cpup()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 07/29] scsi: ufs: Use get_unaligned_be16() instead of be16_to_cpup()
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH 00/26] lpfc: Update lpfc to revision 14.2.0.2
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 22/26] lpfc: Change FA-PWWN detection methodology
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 09/26] lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 12/26] lpfc: Remove unnecessary NULL pointer assignment for ELS_RDF path
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 21/26] lpfc: Refactor cleanup of mailbox commands
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 07/26] lpfc: Clear fabric topology flag before initiating a new FLOGI
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 13/26] lpfc: Move MI module parameter check to handle dynamic disable
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 08/26] lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 18/26] lpfc: Register for Application Services FC-4 type in Fabric topology
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 11/26] lpfc: Transition to NPR state upon LOGO cmpl if link down or aborted
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 25/26] lpfc: Update lpfc version to 14.2.0.2
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 15/26] lpfc: Fix call trace observed during I/O with CMF enabled
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 03/26] lpfc: Fix diagnostic fw logging after a function reset
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 04/26] lpfc: Zero SLI4 fcp_cmnd buffer's fcpCntl0 field
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 26/26] lpfc: Copyright updates for 14.2.0.2 patches
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 06/26] lpfc: Fix SCSI I/O completion and abort handler deadlock
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 02/26] lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 20/26] lpfc: Fix field overload in lpfc_iocbq data structure
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 10/26] lpfc: Update fc_prli_sent outstanding only after guaranteed IOCB submit
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 23/26] lpfc: Update stat accounting for READ_STATUS mbox command
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 17/26] lpfc: Remove false FDMI NVME FC-4 support for NPIV ports
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 24/26] lpfc: Expand setting ELS_ID field in ELS_REQUEST64_WQE
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 01/26] lpfc: Tweak message log categories for ELS/FDMI/NVME Rescan
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 19/26] lpfc: Introduce FC_RSCN_MEMENTO flag for tracking post RSCN completion
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 16/26] lpfc: Revise FDMI reporting of supported port speed for trunk groups
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 05/26] lpfc: Requeue SCSI I/O to upper layer when fw reports link down
  • From: James Smart <jsmart2021@xxxxxxxxx>
• [PATCH 14/26] lpfc: Correct CRC32 calculation for congestion stats
  • From: James Smart <jsmart2021@xxxxxxxxx>
• Re: [PATCH v2 23/29] scsi: ufs: Remove unnecessary ufshcd-crypto.h include directives
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCH v2 29/29] scsi: ufs: Split the drivers/scsi/ufs directory
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 29/29] scsi: ufs: Split the drivers/scsi/ufs directory
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 28/29] scsi: ufs: Move the ufs_is_valid_unit_desc_lun() definition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 27/29] scsi: ufs: Move the struct ufs_ref_clk definition
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 26/29] scsi: ufs: Split the ufshcd.h header file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 25/29] scsi: ufs: Minimize #include directives
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 24/29] scsi: ufs: Fix kernel-doc syntax in ufshcd.h
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 23/29] scsi: ufs: Remove unnecessary ufshcd-crypto.h include directives
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 22/29] scsi: ufs: qcom: Fix ufs_qcom_resume()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 21/29] scsi: ufs: Introduce ufshcd_clkgate_delay_set()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 20/29] scsi: ufs: Remove locking from around single register writes
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 19/29] scsi: ufs: Remove the TRUE and FALSE definitions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 18/29] scsi: ufs: Remove paths from source code comments
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 15/29] scsi: ufs: Remove the driver version
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 16/29] scsi: ufs: Rename sdev_ufs_device into ufs_device_wlun
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 17/29] scsi: ufs: Use an SPDX license identifier in the Kconfig file
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 14/29] scsi: ufs: Make the config_scaling_param calls type safe
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 13/29] scsi: ufs: Switch to aggregate initialization
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 12/29] scsi: ufs: Remove unused constants and code
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 11/29] scsi: ufs: Invert the return value of ufshcd_is_hba_active()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 10/29] scsi: ufs: Declare the quirks array const
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 09/29] scsi: ufs: Rename struct ufs_dev_fix into ufs_dev_quirk
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 08/29] scsi: ufs: Remove the UFS_FIX() and END_FIX() macros
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 07/29] scsi: ufs: Use get_unaligned_be16() instead of be16_to_cpup()
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 06/29] scsi: ufs: Remove ufshcd_lrb.sense_buffer
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 05/29] scsi: ufs: Remove ufshcd_lrb.sense_bufflen
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 04/29] scsi: ufs: Simplify statements that return a boolean
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 03/29] scsi: ufs: Remove superfluous boolean conversions
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 02/29] scsi: ufs: Declare ufshcd_wait_for_register() static
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 01/29] scsi: ufs: Fix a spelling error in a source code comment
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v2 00/29] UFS patches for kernel v5.19
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [RFC PATCH v2 5/6] ufs: use PM OPP when scaling gears
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] scsi: mpi3mr: Fix an error code when probing the driver
  • From: Sathya Prakash Veerichetty <sathya.prakash@xxxxxxxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Luis Chamberlain <mcgrof@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/6] PM: opp: allow control of multiple clocks
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] dt-bindings: opp: accept array of frequencies
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/6] dt-bindings: clock: qcom,gcc-sdm845: add parent power domain
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Bean Huo <huobean@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/7] treewide: scsi: ufs: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 2/7] ufs: add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: Please check ufshpb init flow
  • From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>
• Re: Please check ufshpb init flow
  • From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>
• [PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: ufs: Document Renesas R-Car UFS host controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 7/7] arm64: dts: renesas: r8a779f0: spider-cpu: Enable UFS device
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 5/7] scsi: MAINTAINERS: Add maintainer for Renesas UFS driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 1/1] scsi: ufs: remove redundant HPB unmap
  • From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>
• Re: [PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/7] scsi: ufs-renesas: Add support for Renesas R-Car UFS controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH 3/7] ufs: add UFSHCD_QUIRK_HIBERN_FASTAUTO
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v2] scsi: target: tcmu: Fix possible data corruption
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] security: do not leak information in ioctl
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2] scsi: do not leak information in ioctl
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 00/10] iscsi fixes
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v4 0/2] pm80xx updates
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH] scsi: megaraid_sas: remove unnecessary memset
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 2/7] scsi: lpfc: Fix queue failures when recovering from PCI parity error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 27/30] scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/11] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 07/21] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 12/30] scsi: lpfc: Fix queue failures when recovering from PCI parity error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 6/7] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/12] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/11] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 11/12] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/11] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 3/7] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 26/30] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 08/21] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/30] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 18/21] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 13/30] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 04/12] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 19/21] scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 16/41] scsi: lpfc: Fix queue failures when recovering from PCI parity error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 34/41] scsi: mpt3sas: Fail reset operation if config request timed out
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 35/41] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 36/41] scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 17/41] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/41] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 43/49] scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 42/49] scsi: mvsas: Add PCI ID of RocketRaid 2640
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 41/49] scsi: mpt3sas: Fail reset operation if config request timed out
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 20/49] scsi: lpfc: Fix queue failures when recovering from PCI parity error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 18/49] scsi: lpfc: Improve PCI EEH Error and Recovery Handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 19/49] scsi: lpfc: Fix unload hang after back to back PCI EEH faults
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 17/49] scsi: target: tcmu: Fix possible page UAF
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 21/49] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [f2fs-dev] [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
• [PATCH v2] scsi: do not leak information in ioctl
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH 25/27] block: add a bdev_discard_granularity helper
  • From: David Sterba <dsterba@xxxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: David Sterba <dsterba@xxxxxxx>
• Re: [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: David Sterba <dsterba@xxxxxxx>
• Re: [PATCH] security: do not leak information in ioctl
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Christoph Hellwig <hch@xxxxxx>
• [RFC PATCH v2 6/6] arm64: dts: qcom: sdm845: control RPMHPD performance states with UFS
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 5/6] ufs: use PM OPP when scaling gears
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 3/6] dt-bindings: ufs: common: add OPP table
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 2/6] dt-bindings: opp: accept array of frequencies
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 4/6] PM: opp: allow control of multiple clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 1/6] dt-bindings: clock: qcom,gcc-sdm845: add parent power domain
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 0/6] ufs: set power domain performance state when scaling gears
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] security: do not leak information in ioctl
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Keith Busch <kbusch@xxxxxxxxxx>
• [PATCH v2] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Jan Höppner <hoeppner@xxxxxxxxxxxxx>
• Re: [PATCH for-next] RDMA/rxe: Fix "Replace red-black trees by xarrays"
  • From: Jason Gunthorpe <jgg@xxxxxxxxxx>
• RE: [PATCH 03/10] scsi: iscsi: Release endpoint ID when its freed.
  • From: "wubo (T)" <wubo40@xxxxxxxxxx>
• [PATCH v4 0/2] pm80xx updates
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• [PATCH v4 2/2] scsi: pm80xx: enable upper inbound, outbound queues
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• [PATCH v4 1/2] scsi: pm80xx: mask and unmask upper interrupt vectors 32-63
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] scsi: target: tcmu: Use address_space->invalidate_lock
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2 2/3] scsi: target: tcmu: Fix possible data corruption
  • From: Xiaoguang Wang <xiaoguang.wang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH for-next] RDMA/rxe: Fix "Replace red-black trees by xarrays"
  • From: Zhu Yanjun <zyjzyj2000@xxxxxxxxx>
• Re: [PATCH for-next] RDMA/rxe: Fix "Replace red-black trees by xarrays"
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH for-next] RDMA/rxe: Fix "Replace red-black trees by xarrays"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v24 36/46] sg: rework mmap support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 40/46] sg: remove rcv_done request state
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 43/46] sg: no_dxfer: move to/from kernel buffers
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 30/46] sg: expand sg_comm_wr_t
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 29/46] sg: add 8 byte SCSI LUN to sg_scsi_id
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 33/46] sg: move procfs objects to avoid forward decls
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 44/46] sg: add bio_poll support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 42/46] sg: remove unit attention check for device changed
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 41/46] sg: track lowest inactive and await indexes
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 45/46] sg: add statistics similar to st
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 46/46] sg: bump version to 4.0.13
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 38/46] sg: warn v3 write system call users
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 35/46] sg: first debugfs support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 39/46] sg: add mmap_sz tracking
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 31/46] sg: add sg_iosubmit_v3 and sg_ioreceive_v3 ioctls
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 34/46] sg: protect multiple receivers
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 37/46] sg: defang allow_dio
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 32/46] sg: add some __must_hold macros
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 25/46] sg: replace rq array with xarray
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 26/46] sg: sense buffer rework
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 28/46] sg: rework debug info
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 27/46] sg: add sg v4 interface support
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 22/46] sg: printk change %p to %pK
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 24/46] sg: xarray for reqs in fd
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 23/46] sg: xarray for fds in device
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 21/46] sg: sg_fill_request_element
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 20/46] sg: sg_find_srp_by_id
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 19/46] sg: introduce request state machine
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 17/46] sg: replace sg_allow_access
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 18/46] sg: rework scatter gather handling
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 16/46] sg: rework sg_mmap
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 15/46] sg: rework sg_vma_fault
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 14/46] sg: sg_common_write add structure for arguments
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 13/46] sg: split sg_read
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 07/46] sg: move header to uapi section
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 10/46] sg: improve naming
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 11/46] sg: change rwlock to spinlock
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 12/46] sg: ioctl handling
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 08/46] sg: speed sg_poll and sg_get_num_waiting
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 05/46] sg: bitops in sg_device
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 06/46] sg: make open count an atomic
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 09/46] sg: sg_allow_if_err_recovery and renames
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 04/46] sg: rework sg_poll(), minor changes
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 02/46] sg: remove typedefs, type+formatting cleanup
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 03/46] sg: sg_log and is_enabled
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 01/46] sg: move functions around
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v24 00/46] sg: add v4 interface
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH for-next] RDMA/rxe: Fix "Replace red-black trees by xarrays"
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• [PATCH v2 5/6] scsi_debug: reinstate cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 6/6] st,sr,stex: use scsi_cmnd cdb access functions
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 4/6] bsg: allow cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 3/6] sg: reinstate cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 2/6] sd, sd_zbc: use scsi_cmnd cdb access functions
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v2 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Bob Pearson <rpearsonhpe@xxxxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Yi Zhang <yi.zhang@xxxxxxxxxx>
• [PATCH V2] lib/irq_poll: Add local_bh_disable() in irq_poll_cpu_dead()
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH REPOST] irq_poll: Add local_bh_disable() in cpu_dead notifier
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [GIT PULL] SCSI fixes for 5.18-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH] security: do not leak information in ioctl
  • From: Tom Rix <trix@xxxxxxxxxx>
• [GIT PULL] SCSI fixes for 5.18-rc1
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Coly Li <colyli@xxxxxxx>
• [PATCH] scsi: mpi3mr: Fix an error code when probing the driver
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [Drbd-dev] [PATCH 04/27] drbd: remove assign_p_sizes_qlim
  • From: Christoph Böhmwalder <christoph.boehmwalder@xxxxxxxxxx>
• Re: [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Christoph Böhmwalder <christoph.boehmwalder@xxxxxxxxxx>
• [PATCH 13/27] block: add a bdev_fua helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/27] block: remove queue_discard_alignment
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 25/27] block: add a bdev_discard_granularity helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 21/27] block: move {bdev,queue_limit}_discard_alignment out of line
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 27/27] direct-io: remove random prefetches
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/27] block: refactor discard bio size limiting
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/27] block: add a bdev_stable_writes helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/27] block: add a bdev_nonrot helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/27] block: add a bdev_write_cache helper
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/27] ntfs3: use bdev_logical_block_size instead of open coding it
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/27] drbd: use bdev_alignment_offset instead of queue_alignment_offset
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/27] drbd: cleanup decide_on_discard_support
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/27] drbd: use bdev based limit helpers in drbd_send_sizes
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue
  • From: Christoph Hellwig <hch@xxxxxx>
• use block_device based APIs in block layer consumers v2
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 03/27] target: fix discard alignment on partitions
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/27] drbd: remove assign_p_sizes_qlim
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH] Revert "scsi: scsi_debug: Address races following module load"
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 09/10] scsi: qedi: Fix failed disconnect handling.
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 08/10] scsi: iscsi: Fix nop handling during conn recovery
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 10/10] scsi: iscsi: Add Mike Christie as co-maintainer
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 07/10] scsi: iscsi: Merge suspend fields
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 06/10] scsi: iscsi: Fix unbound endpoint error handling
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 05/10] scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 04/10] scsi: iscsi: Fix endpoint reuse regression
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 03/10] scsi: iscsi: Release endpoint ID when its freed.
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 02/10] scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  • From: Chris Leech <cleech@xxxxxxxxxx>
• Re: [PATCH 01/10] scsi: iscsi: Move iscsi_ep_disconnect
  • From: Chris Leech <cleech@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION ff511c1c68a5a35ab0b3efb3c306fd80b10d74be
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: "Ewan D. Milne" <emilne@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mpi3mr: add support for driver commands
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH v3 1/8] mpi3mr: add BSG device support
  • From: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
• Re: [PATCH 10/10] scsi: iscsi: Add Mike Christie as co-maintainer
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 09/10] scsi: qedi: Fix failed disconnect handling.
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 06/10] scsi: iscsi: Fix unbound endpoint error handling
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 05/10] scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 04/10] scsi: iscsi: Fix endpoint reuse regression
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 03/10] scsi: iscsi: Release endpoint ID when its freed.
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH 02/10] scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  • From: Lee Duncan <lduncan@xxxxxxxx>
• Re: [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• RE: [EXT] [PATCH 09/10] scsi: qedi: Fix failed disconnect handling.
  • From: Manish Rangankar <mrangankar@xxxxxxxxxxx>
• RE: [EXT] [PATCH 00/10] iscsi fixes
  • From: Manish Rangankar <mrangankar@xxxxxxxxxxx>
• Re: [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Sathya Prakash Veerichetty <sathya.prakash@xxxxxxxxxxxx>
• Re: [PATCH 09/29] scsi: ufs: Declare the quirks array const
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 4/4] scsi: ufs: ufshcd: constify pointed data
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: RIP: 0010:ahd_init.cold+0x96/0x98 [aic79xx] - 5.17.0
  • From: Bruno Goncalves <bgoncalv@xxxxxxxxxx>
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 2/8] mpi3mr: add support for driver commands
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v3 1/8] mpi3mr: add BSG device support
  • From: Hannes Reinecke <hare@xxxxxxx>
• Re: [PATCH v2 3/3] scsi: target: tcmu: Use address_space->invalidate_lock
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• Re: [PATCH v2 2/3] scsi: target: tcmu: Fix possible data corruption
  • From: Bodo Stroesser <bostroesser@xxxxxxxxx>
• [PATCH 3/4] scsi: ufs: ufshcd-pltfrm: constify pointed data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/4] scsi: core: constify pointer to scsi_host_template
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/4] scsi: core: fix white-spaces
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/4] scsi: ufs: ufshcd: constify pointed data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drivers: Fix spelling mistake "writting" -> "writing"
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• [PATCH] drivers: Fix spelling mistake "writting" -> "writing"
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH 8/9] x86/crypto: eliminate anonymous module_init & module_exit
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] scsi: pm80xx: enable upper inbound, outbound queues
  • From: <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] scsi: pm80xx: mask and unmask upper interrupt vectors 32-63
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 2/2] scsi: pm80xx: enable upper inbound, outbound queues
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH] scsi: fcoe: simplify if-if to if-else
  • From: Yihao Han <hanyihao@xxxxxxxx>
• Re: [PATCH v3 2/2] scsi: pm80xx: enable upper inbound, outbound queues
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• Re: [PATCH v3 1/2] scsi: pm80xx: mask and unmask upper interrupt vectors 32-63
  • From: Jinpu Wang <jinpu.wang@xxxxxxxxx>
• [PATCH v3 1/2] scsi: pm80xx: mask and unmask upper interrupt vectors 32-63
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• [PATCH v3 0/2] pm80xx updates
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• [PATCH v3 2/2] scsi: pm80xx: enable upper inbound, outbound queues
  • From: Ajish Koshy <Ajish.Koshy@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 0/2] storvsc, netvsc: Improve logging
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH 0/6] scsi: fix scsi_cmd::cmd_len
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 6/6] st,sr: use scsi_cmnd cdb access functions and dtor
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 5/6] scsi_debug: reinstate cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 1/6] scsi_cmnd: reinstate support for cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 2/6] sd, sd_zbc: use scsi_cmnd cdb access functions
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 4/6] bsg: allow cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH 3/6] sg: reinstate cmd_len > 32
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• Re: [bug report][bisected] modprob -r scsi-debug take more than 3mins during blktests srp/ tests
  • From: Yi Zhang <yi.zhang@xxxxxxxxxx>
• [PATCH 10/10] scsi: iscsi: Add Mike Christie as co-maintainer
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 03/10] scsi: iscsi: Release endpoint ID when its freed.
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 04/10] scsi: iscsi: Fix endpoint reuse regression
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 05/10] scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 09/10] scsi: qedi: Fix failed disconnect handling.
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 08/10] scsi: iscsi: Fix nop handling during conn recovery
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 01/10] scsi: iscsi: Move iscsi_ep_disconnect
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 06/10] scsi: iscsi: Fix unbound endpoint error handling
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 00/10] iscsi fixes
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 07/10] scsi: iscsi: Merge suspend fields
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• [PATCH 02/10] scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  • From: Mike Christie <michael.christie@xxxxxxxxxx>
• Re: [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH v3 8/8] mpi3mr: update driver version to 8.0.0.69.0
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 1/8] mpi3mr: add BSG device support
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 0/8] mpi3mr: add BSG interface support for controller management
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 6/8] mpi3mr: expose adapter state to sysfs
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 4/8] mpi3mr: add support for MPT commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 2/8] mpi3mr: add support for driver commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 5/8] mpi3mr: add support for PEL commands
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 3/8] mpi3mr: move MPI headers to uapi/scsi/mpi3mr
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• [PATCH v3 7/8] mpi3mr: add support for nvme pass-through
  • From: Sumit Saxena <sumit.saxena@xxxxxxxxxxxx>
• Re: [PATCH v2 0/4] rpmb subsystem, uapi and virtio-rpmb driver
  • From: Bean Huo <huobean@xxxxxxxxx>
• [Bug 215691] mpt3sas "SMP command sent to the expander has timed out" cause halt
  • From: bugzilla-daemon@xxxxxxxxxx
• Re: [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD
  • From: David Sterba <dsterba@xxxxxxx>
• Re: [PATCH 24/27] block: add a bdev_discard_granularity helper
  • From: David Sterba <dsterba@xxxxxxx>
• Re: [PATCH 07/27] btrfs: use bdev_max_active_zones instead of open coding it
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 23/27] block: add a bdev_max_discard_sectors helper
  • From: David Sterba <dsterba@xxxxxxx>