[PATCH v2 04/11] qla2xxx: Turn off multi-queue for 8G adapter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

For 8G adapter, multi-queue was enabled accidentally.
This patch make sure multi-queue is not enabled accidentally.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_def.h |  4 ++--
 drivers/scsi/qla2xxx/qla_isr.c | 16 ++++++----------
 2 files changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 74d4234e5a31..89cb6c24258d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -4273,8 +4273,8 @@ struct qla_hw_data {
 #define IS_OEM_001(ha)          ((ha)->device_type & DT_OEM_001)
 #define HAS_EXTENDED_IDS(ha)    ((ha)->device_type & DT_EXTENDED_IDS)
 #define IS_CT6_SUPPORTED(ha)	((ha)->device_type & DT_CT6_SUPPORTED)
-#define IS_MQUE_CAPABLE(ha)	((ha)->mqenable || IS_QLA83XX(ha) || \
-				IS_QLA27XX(ha) || IS_QLA28XX(ha))
+#define IS_MQUE_CAPABLE(ha)	(IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
+				 IS_QLA28XX(ha))
 #define IS_BIDI_CAPABLE(ha) \
     (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
 /* Bit 21 of fw_attributes decides the MCTP capabilities */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 9af9b35edc27..24f9a3b116d8 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -4430,16 +4430,12 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 	}
 
 	/* Enable MSI-X vector for response queue update for queue 0 */
-	if (IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
-		if (ha->msixbase && ha->mqiobase &&
-		    (ha->max_rsp_queues > 1 || ha->max_req_queues > 1 ||
-		     ql2xmqsupport))
-			ha->mqenable = 1;
-	} else
-		if (ha->mqiobase &&
-		    (ha->max_rsp_queues > 1 || ha->max_req_queues > 1 ||
-		     ql2xmqsupport))
-			ha->mqenable = 1;
+	if (IS_MQUE_CAPABLE(ha) &&
+	    (ha->msixbase && ha->mqiobase && ha->max_qpairs))
+		ha->mqenable = 1;
+	else
+		ha->mqenable = 0;
+
 	ql_dbg(ql_dbg_multiq, vha, 0xc005,
 	    "mqiobase=%p, max_rsp_queues=%d, max_req_queues=%d.\n",
 	    ha->mqiobase, ha->max_rsp_queues, ha->max_req_queues);
-- 
2.19.0.rc0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux