From: Arnd Bergmann <arnd@xxxxxxxx>
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.
Before commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit."),
the driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.
This was in turn fixed in commit 56f396146af2 ("scsi: BusLogic: Fix
64-bit system enumeration error for Buslogic"), 8 years later, which
shows that there are not a lot of users.
Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox
and VMware. Both of those only emulate it for Windows 2000 and older
operating systems that did not ship with the better LSI logic driver.
Do a minimum fix that searches through the list of descriptors to find
one that matches the bus address. This is clearly as inefficient as
was indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much
more invasive.
Cc: Maciej W. Rozycki <macro@xxxxxxxxxxx>
Cc: Matt Wang <wwentao@xxxxxxxxxx>
Tested-by: Khalid Aziz <khalid@xxxxxxxxxxxxxx>
Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
v3: Address issues pointed out by Khalid Aziz
v2: Attempt to fix the driver instead of removing it
---
drivers/scsi/BusLogic.c | 35 +++++++++++++++++++++++------------
drivers/scsi/Kconfig | 2 +-
2 files changed, 24 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index a897c8f914cf..f2abffce2659 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2515,12 +2515,26 @@ static int blogic_resultcode(struct blogic_adapter *adapter,
return (hoststatus << 16) | tgt_status;
}
+/*
+ * turn the dma address from an inbox into a ccb pointer
+ * This is rather inefficient.
+ */
+static struct blogic_ccb *
+blogic_inbox_to_ccb(struct blogic_adapter *adapter, struct blogic_inbox *inbox)
+{
+ struct blogic_ccb *ccb;
+
+ for (ccb = adapter->all_ccbs; ccb; ccb = ccb->next_all)
+ if (inbox->ccb == ccb->dma_handle)
+ break;
+
+ return ccb;
+}
/*
blogic_scan_inbox scans the Incoming Mailboxes saving any
Incoming Mailbox entries for completion processing.
*/
-
static void blogic_scan_inbox(struct blogic_adapter *adapter)
{
/*
@@ -2540,17 +2554,14 @@ static void blogic_scan_inbox(struct blogic_adapter *adapter)
enum blogic_cmplt_code comp_code;
while ((comp_code = next_inbox->comp_code) != BLOGIC_INBOX_FREE) {
- /*
- We are only allowed to do this because we limit our
- architectures we run on to machines where bus_to_virt(
- actually works. There *needs* to be a dma_addr_to_virt()
- in the new PCI DMA mapping interface to replace
- bus_to_virt() or else this code is going to become very
- innefficient.
- */
- struct blogic_ccb *ccb =
- (struct blogic_ccb *) bus_to_virt(next_inbox->ccb);
- if (comp_code != BLOGIC_CMD_NOTFOUND) {
+ struct blogic_ccb *ccb = blogic_inbox_to_ccb(adapter, next_inbox);
+ if (!ccb) {
+ /*
+ * This should never happen, unless the CCB list is
+ * corrupted in memory.
+ */
+ blogic_warn("Could not find CCB for dma address %x\n", adapter, next_inbox->ccb);
+ } else if (comp_code != BLOGIC_CMD_NOTFOUND) {
if (ccb->status == BLOGIC_CCB_ACTIVE ||
ccb->status == BLOGIC_CCB_RESET) {
/*
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6e3a04107bb6..689186f3a908 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -514,7 +514,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on PCI && SCSI && VIRT_TO_BUS
+ depends on PCI && SCSI
help
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
--
2.29.2
