Re: [PATCH v4 5/5] libata-scsi: Cap ata_device->max_sectors according to shost->max_sectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/06/2022 00:24, Damien Le Moal wrote:
On 6/28/22 00:25, John Garry wrote:
ATA devices (struct ata_device) have a max_sectors field which is
configured internally in libata. This is then used to (re)configure the
associated sdev request queue max_sectors value from how it is earlier set
in __scsi_init_queue(). In __scsi_init_queue() the max_sectors value is set
according to shost limits, which includes host DMA mapping limits.

Cap the ata_device max_sectors according to shost->max_sectors to respect
this shost limit.

Signed-off-by: John Garry<john.garry@xxxxxxxxxx>
Acked-by: Damien Le Moal<damien.lemoal@xxxxxxxxxxxxxxxxxx>
Nit: please change the patch title to "ata: libata-scsi: Cap ..."


ok, but it's going to be an even longer title :)

BTW, this patch has no real dependency on the rest of the series, so could be taken separately if you prefer.

Thanks,
John



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux