Hi Tony,
Apologies for the delay. This was not forgotten, there were repro attempts
and discussions happening internally.
See further comments inline..
On Mon, 20 Jun 2022, 7:33am, Tony Battersby wrote:
>
> ----------------------------------------------------------------------
> On 6/20/22 02:56, Thorsten Leemhuis wrote:
> > Hi!
> >
> > On 28.05.22 02:27, Arun Easi wrote:
> >> Hi Tony,
> >>
> >> Thanks for reporting the issue. We are trying to recreate this issue in
> >> house. I will reach out to you for logs, if we cannot repro. Typically, we
> >> get sufficient context to the issue when the problem is reproduced with
> >> module parameter "ql2xextended_error_logging=1".
> >>
> >> Anyway, I will let you know the status.
> > What's the status here? Tony, did you provide the info Arun asked for=
> > Or was some progress made somehow without it?
> >
> I was waiting for them to reproduce the problem, or ask for logs.
> Anyway, here are the logs they said they might want:
>
> modprobe qla2xxx ql2xextended_error_logging=1
>
> Jun 20 13:51:46 tony13 kern.warn kernel: qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.07.400-k-debug.
> Jun 20 13:51:46 tony13 kern.warn kernel: qla2xxx [0000:00:00.0]-011c: : MSI-X vector count: 32.
> Jun 20 13:51:46 tony13 kern.warn kernel: qla2xxx [0000:00:00.0]-001d: : Found an ISP2031 irq 37 iobase 0x00000000875338f3.
> Jun 20 13:51:46 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-00c6:6: MSI-X: Using 26 vectors
> Jun 20 13:51:47 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-0075:6: ZIO mode 6 enabled; timer delay (200 us).
> Jun 20 13:51:47 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-ffff:6: FC4 priority set to NVMe
> Jun 20 13:51:48 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-507b:6: SFP detect: Short-Range SFP (nvr=0 ll=40 lr=0 lrd=0).
> Jun 20 13:51:50 tony13 kern.info kernel: scsi host6: qla2xxx
> Jun 20 13:51:50 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-4000:6: DPC handler sleeping.
> Jun 20 13:51:51 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-400f:6: Loop resync scheduled.
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-00fb:6: QLogic QLE2672 - QLE2672 QLogic 2-port 16Gb Fibre Channel Adapter.
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-00fc:6: ISP2031: PCIe (8.0GT/s x8) @ 0000:83:00.0 hdma- host#=6 fw=8.07.12 (d0d5).
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:00:00.0]-011c: : MSI-X vector count: 32.
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:00:00.0]-001d: : Found an ISP2031 irq 135 iobase 0x000000007cfbf1eb.
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-00c6:7: MSI-X: Using 26 vectors
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-0075:7: ZIO mode 6 enabled; timer delay (200 us).
> Jun 20 13:51:55 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-ffff:7: FC4 priority set to NVMe
> Jun 20 13:51:57 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-507b:7: SFP detect: Short-Range SFP (nvr=0 ll=40 lr=0 lrd=0).
> Jun 20 13:51:58 tony13 kern.info kernel: scsi host7: qla2xxx
> Jun 20 13:51:58 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4000:7: DPC handler sleeping.
> Jun 20 13:51:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-400f:7: Loop resync scheduled.
> Jun 20 13:52:03 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-00fb:7: QLogic QLE2672 - QLE2672 QLogic 2-port 16Gb Fibre Channel Adapter.
> Jun 20 13:52:03 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-00fc:7: ISP2031: PCIe (8.0GT/s x8) @ 0000:83:00.1 hdma- host#=7 fw=8.07.12 (d0d5).
> Jun 20 13:52:11 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-8038:6: Cable is unplugged...
> Jun 20 13:52:11 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-803a:6: fw_state=4 (7, 141, 0, 800 0) curr time=ffffc764.
> Jun 20 13:52:11 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-206c:6: qla2x00_loop_resync *** FAILED ***.
> Jun 20 13:52:11 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-4010:6: Loop resync end.
> Jun 20 13:52:11 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-4000:6: DPC handler sleeping.
> Jun 20 13:52:20 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-8038:7: Cable is unplugged...
> Jun 20 13:52:20 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-803a:7: fw_state=4 (7, 141, 0, 800 0) curr time=ffffcaac.
> Jun 20 13:52:20 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-206c:7: qla2x00_loop_resync *** FAILED ***.
> Jun 20 13:52:20 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4010:7: Loop resync end.
> Jun 20 13:52:20 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4000:7: DPC handler sleeping.
>
> Plug in cable
>
> Jun 20 13:52:56 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-5009:7: LIP occurred (0).
> Jun 20 13:52:56 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-10b7:7: Format 0 : Number of VPs setup 254, number of VPs acquired 1.
> Jun 20 13:52:56 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-10b8:7: Primary port id 0000ef.
> Jun 20 13:52:58 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-500a:7: LOOP UP detected (8 Gbps).
> Jun 20 13:52:58 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-5012:7: Port database changed ffff 0006 0000.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-400f:7: Loop resync scheduled.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-8037:7: F/W Ready - OK.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-803a:7: fw_state=3 (7, 141, 0, 800 0) curr time=ffffd9e8.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-200b:7: HBA in NL topology.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2014:7: Configure loop -- dpc flags = 0x112e0.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2011:7: Entries in ID list (1).
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20d8:7: qla24xx_fcport_handle_login 50:00:e1:11:c5:27:f0:70 DS 0 LS 7 P 0 fl 0 confl 0000000000000000 rscn 0|0 login 0 lid 0 scan 2 fc4type 0
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-307b:7: qla_chk_n2n_b4_login 50:00:e1:11:c5:27:f0:70 DS 0 LS 7 lid 0 retries=30
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20bf:7: qla_chk_n2n_b4_login 1628 50:00:e1:11:c5:27:f0:70 post login
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2069:7: LOOP READY.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-206b:7: qla2x00_configure_loop: exiting normally. local port wwpn 2100000e1e2227a1 id 0000ef)
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4010:7: Loop resync end.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2134:7: FCPort 50:00:e1:11:c5:27:f0:70 disc_state transition: DELETED to LOGIN_PEND - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2072:7: Async-login - 50:00:e1:11:c5:27:f0:70 hdl=2, loopid=0 portid=000026 retries=29 .
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4000:7: DPC handler sleeping.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-5036:7: Async-login complete: handle=2 pid=000026 wwpn=50:00:e1:11:c5:27:f0:70 iop0=312
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20dd:7: qla2x00_async_login_sp_done 50:00:e1:11:c5:27:f0:70 res 0
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-ffff:7: qla24xx_handle_plogi_done_event 50:00:e1:11:c5:27:f0:70 DS 3 LS 7 rc 0 login 0|0 rscn 0|0 data 4000|0 iop 0|0
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20ea:7: qla24xx_handle_plogi_done_event 2232 50:00:e1:11:c5:27:f0:70 LoopID 0x0 in use with 000026. post gpdb
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2134:7: FCPort 50:00:e1:11:c5:27:f0:70 disc_state transition: LOGIN_PEND to GPDB - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20dc:7: Async-gpdb 50:00:e1:11:c5:27:f0:70 hndl 0 opt 0
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20db:7: Async done-gpdb res 0, WWPN 50:00:e1:11:c5:27:f0:70 mb[1]=0 mb[2]=ffdd
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20d2:7: qla24xx_handle_gpdb_event 50:00:e1:11:c5:27:f0:70 DS 5 LS 6 fc4_type 0 rc 0
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2062:7: 50:00:e1:11:c5:27:f0:70 SVC Param w3 0312
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2134:7: FCPort 50:00:e1:11:c5:27:f0:70 disc_state transition: GPDB to UPD_FCPORT - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20ef:7: qla2x00_update_fcport 50:00:e1:11:c5:27:f0:70
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2134:7: FCPort 50:00:e1:11:c5:27:f0:70 disc_state transition: UPD_FCPORT to UPD_FCPORT - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-207d:7: FCPort 50:00:e1:11:c5:27:f0:70 state transitioned from UNCONFIGURED to ONLINE - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20ee:7: qla2x00_reg_remote_port: 5000e111c527f070. rport 7:0:0 (00000000bd175424) is tgt mode
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-2134:7: FCPort 50:00:e1:11:c5:27:f0:70 disc_state transition: UPD_FCPORT to LOGIN_COMPLETE - portid=000026.
> Jun 20 13:52:59 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-911e:7: qla_register_fcport_fn rscn gen 0/0 next DS 0
> Jun 20 13:52:59 tony13 kern.notice kernel: scsi 7:0:0:0: Sequential-Access IBM ULTRIUM-HH8 K4K1 PQ: 0 ANSI: 6
> Jun 20 13:52:59 tony13 kern.notice kernel: scsi 7:0:0:0: Attached scsi generic sg1 type 1
> Jun 20 13:52:59 tony13 kern.info kernel: st: Version 20160209, fixed bufsize 32768, s/g segs 256
> Jun 20 13:52:59 tony13 kern.notice kernel: st 7:0:0:0: Attached scsi tape st0
> Jun 20 13:52:59 tony13 kern.info kernel: st 7:0:0:0: st0: try direct i/o: yes (alignment 8 B)
>
> Unplug cable
>
> Jun 20 13:54:03 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-500b:7: LOOP DOWN detected (2 7 0 0).
> Jun 20 13:54:03 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20f1:7: Mark all dev lost
>
> sleep 180
>
> cat /proc/scsi/scsi
> Attached devices:
> Host: scsi7 Channel: 00 Id: 00 Lun: 00
> Vendor: IBM Model: ULTRIUM-HH8 Rev: K4K1
> Type: Sequential-Access ANSI SCSI revision: 06
Thanks for the info. Just to reiterate, you've reported two issues (though
this log was showing only 1 of them).
Issue 1 - Tape device never disappears when removed
Issue 2 - When a direct connected tape 1 was replaced with tape 2, tape 2
was not discovered.
For Issue-2, please try the attached patch. This may not be the final fix,
but wanted to check if that would fix the issue for you.
For Issue-1, the behavior was intentional, though that behavior needs
refinement. These tape drives support something called FC sequence level
error recovery (added in FCP-2), which can make tape I/Os survive even
across a short cable pull. This is not a simple retry of the I/O, rather a
retry done at the FC sequence level that gives the IO a better chance of
revival. In other words, the said patch that caused regression, while
introduces an incorrect reporting of the state of the device, makes backup
more resilient.
Now, onto the behavior when device state is reported immediately. What we
have observed, at least with one tape drive from a major vendor, is that,
across a device loss and device back case with both the events reported to
upper layers, the backup operation was getting failed. This is due to a
REPORT LUNS command being issued during device reappearance reporting
(fc_remote_port_add -> SCSI scan), which the tape drive was not expecting
and caused the backup to fail.
I know that some tape drives do not support multiple commands to it at the
same time, but not sure if that is still the norm these days.
So, perhaps one way to make the behavior better, is to either report the
disappearing device a bit delayed or have intelligence added in SCSI scan
to detect ongoing tape IO operations and delay/avoid the REPORT LUNs.
Former is a more contained (in the LLD) fix.
Regards,
-Arun
>
> rmmod qla2xxx
>
> Jun 20 14:00:18 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-211a:7: Delaying session delete for FCP2 flags 0x4 port_type = 0x4 port_id=000026 50
> Jun 20 14:00:18 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-b079:7: Removing driver
> Jun 20 14:00:18 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-00af:7: Performing ISP error recovery - ha=00000000c584070c.
> Jun 20 14:00:18 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-20f1:7: Mark all dev lost
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-211a:7: Delaying session delete for FCP2 flags 0x4 port_type = 0x4 port_id=000026 50
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-4011:7: DPC handler exiting.
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.1]-207d:7: FCPort 50:00:e1:11:c5:27:f0:70 state transitioned from ONLINE to DEAD - portid=000026.
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-b079:6: Removing driver
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-00af:6: Performing ISP error recovery - ha=000000008a8560d1.
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-20f1:6: Mark all dev lost
> Jun 20 14:00:28 tony13 kern.warn kernel: qla2xxx [0000:83:00.0]-4011:6: DPC handler exiting.
> From af58373c6a61f74b3b190e17333b3b1e4d151919 Mon Sep 17 00:00:00 2001
From: Arun Easi <aeasi@xxxxxxxxxxx>
Date: Thu, 16 Jun 2022 17:31:43 -0700
Subject: [PATCH] qla2xxx: Fix discovery issues in FC-AL topology
Topology: Arbitrated loop
Device: Tape (FCP-2 device)
Issue:
1. Connect Tape-A directly to the HBA port
2. Disconnect it and connect Tape-B
3. Tape-B is not discovered by the HBA driver
4. When Tape-B is disconnected and connected back, it shows up
To fix this, when Get ID List reports no devices and loop map
reports there are devices, issue a re-init so that device login
could be performed during next link initialization.
Reported-by: Tony Battersby <tonyb@xxxxxxxxxxxxxxx>
Signed-off-by: Arun Easi <aeasi@xxxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_gbl.h | 3 ++-
drivers/scsi/qla2xxx/qla_init.c | 29 +++++++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_mbx.c | 5 ++++-
3 files changed, 35 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index dac27b5..b9f106a 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -433,7 +433,8 @@ extern int
qla2x00_get_resource_cnts(scsi_qla_host_t *);
extern int
-qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
+qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map,
+ u8 *num_entries);
extern int
qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, struct link_statistics *,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3f3417a..3defbea 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5488,6 +5488,22 @@ static int qla2x00_configure_n2n_loop(scsi_qla_host_t *vha)
return QLA_FUNCTION_FAILED;
}
+static void
+qla_reinitialize_link(scsi_qla_host_t *vha)
+{
+ int rval;
+
+ atomic_set(&vha->loop_state, LOOP_DOWN);
+ atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
+ rval = qla2x00_full_login_lip(vha);
+ if (rval == QLA_SUCCESS) {
+ ql_dbg(ql_dbg_disc, vha, 0xd050, "Link reinitialized\n");
+ } else {
+ ql_dbg(ql_dbg_disc, vha, 0xd051,
+ "Link reinitialization failed (%d)\n", rval);
+ }
+}
+
/*
* qla2x00_configure_local_loop
* Updates Fibre Channel Device Database with local loop devices.
@@ -5539,6 +5555,19 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha)
spin_unlock_irqrestore(&vha->work_lock, flags);
if (vha->scan.scan_retry < MAX_SCAN_RETRIES) {
+ u8 loop_map_entries = 0;
+ int rc;
+
+ rc = qla2x00_get_fcal_position_map(vha, NULL,
+ &loop_map_entries);
+ if (rc == QLA_SUCCESS && loop_map_entries > 1) {
+ /*
+ * There are devices that are still not logged
+ * in. Reinitialize to give them a chance.
+ */
+ qla_reinitialize_link(vha);
+ return QLA_FUNCTION_FAILED;
+ }
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 892caf2..4a33874 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3066,7 +3066,8 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *vha)
* Kernel context.
*/
int
-qla2x00_get_fcal_position_map(scsi_qla_host_t *vha, char *pos_map)
+qla2x00_get_fcal_position_map(scsi_qla_host_t *vha, char *pos_map,
+ u8 *num_entries)
{
int rval;
mbx_cmd_t mc;
@@ -3106,6 +3107,8 @@ qla2x00_get_fcal_position_map(scsi_qla_host_t *vha, char *pos_map)
if (pos_map)
memcpy(pos_map, pmap, FCAL_MAP_SIZE);
+ if (num_entries)
+ *num_entries = pmap[0];
}
dma_pool_free(ha->s_dma_pool, pmap, pmap_dma);
--
2.9.5
