Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Signed-off-by: Bart Van Assche <bvanassche@xxxxxxx> --- drivers/ufs/core/ufshcd.c | 42 ++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 4ed2f6c29e80..b7120c5f0920 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -748,17 +748,28 @@ static enum utp_ocs ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) } /** - * ufshcd_utrl_clear - Clear a bit in UTRLCLR register + * ufshcd_utrl_clear() - Clear requests from the controller request list. * @hba: per adapter instance - * @pos: position of the bit to be cleared + * @mask: mask with one bit set for each request to be cleared */ -static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 mask) { if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) - ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); - else - ufshcd_writel(hba, ~(1 << pos), - REG_UTP_TRANSFER_REQ_LIST_CLEAR); + mask = ~mask; + /* + * From the UFSHCI specification: "UTP Transfer Request List CLear + * Register (UTRLCLR): This field is bit significant. Each bit + * corresponds to a slot in the UTP Transfer Request List, where bit 0 + * corresponds to request slot 0. A bit in this field is set to ‘0’ + * by host software to indicate to the host controller that a transfer + * request slot is cleared. The host controller + * shall free up any resources associated to the request slot + * immediately, and shall set the associated bit in UTRLDBR to ‘0’. The + * host software indicates no change to request slots by setting the + * associated bits in this field to ‘1’. Bits in this field shall only + * be set ‘1’ or ‘0’ by host software when UTRLRSR is set to ‘1’." + */ + ufshcd_writel(hba, ~mask, REG_UTP_TRANSFER_REQ_LIST_CLEAR); } /** @@ -2865,15 +2876,18 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, return ufshcd_compose_devman_upiu(hba, lrbp); } -static int -ufshcd_clear_cmd(struct ufs_hba *hba, int tag) +/* + * Clear all the requests from the controller for which a bit has been set in + * @mask and wait until the controller confirms that these requests have been + * cleared. + */ +static int ufshcd_clear_cmds(struct ufs_hba *hba, u32 mask) { unsigned long flags; - u32 mask = 1 << tag; /* clear outstanding transaction before retry */ spin_lock_irqsave(hba->host->host_lock, flags); - ufshcd_utrl_clear(hba, tag); + ufshcd_utrl_clear(hba, mask); spin_unlock_irqrestore(hba->host->host_lock, flags); /* @@ -2961,7 +2975,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, err = -ETIMEDOUT; dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", __func__, lrbp->task_tag); - if (!ufshcd_clear_cmd(hba, lrbp->task_tag)) + if (!ufshcd_clear_cmds(hba, 1U << lrbp->task_tag)) /* successfully cleared the command, retry if needed */ err = -EAGAIN; /* @@ -6989,7 +7003,7 @@ static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) /* clear the commands that were pending for corresponding LUN */ for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) { if (hba->lrb[pos].lun == lun) { - err = ufshcd_clear_cmd(hba, pos); + err = ufshcd_clear_cmds(hba, 1U << pos); if (err) break; __ufshcd_transfer_req_compl(hba, 1U << pos); @@ -7091,7 +7105,7 @@ static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) goto out; } - err = ufshcd_clear_cmd(hba, tag); + err = ufshcd_clear_cmds(hba, 1U << tag); if (err) dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n", __func__, tag, err);