[PATCH v2 5/8] scsi: ufs-mediatek: Prevent device regulators setting as LPM incorrectly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Po-Wen Kao <powen.kao@xxxxxxxxxxxx>

Device regulatrs are allowed to enter low-power mode
if neither device is not in active mode, nor VCC does not
keep on.

Simply fix this by adding conditions before LPM decision.

Reviewed-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
Signed-off-by: Powen Kao <powen.kao@xxxxxxxxxxxx>
Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
---
 drivers/ufs/host/ufs-mediatek.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 3b3fe5470b71..c9afe373437c 100755
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -1034,10 +1034,18 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
 	if (!hba->vreg_info.vccq2 || !hba->vreg_info.vcc)
 		return;
 
-	if (lpm && !hba->vreg_info.vcc->enabled)
+	/* Bypass LPM when device is still active */
+	if (lpm && ufshcd_is_ufs_dev_active(hba))
+		return;
+
+	/* Bypass LPM if VCC is enabled */
+	if (lpm && hba->vreg_info.vcc->enabled)
+		return;
+
+	if (lpm)
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_IDLE);
-	else if (!lpm)
+	else
 		regulator_set_mode(hba->vreg_info.vccq2->reg,
 				   REGULATOR_MODE_NORMAL);
 }
-- 
2.18.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux