Linux Renesas SOC
[Prev Page][Next Page]
- [PATCH v4 1/3] phy: qcom-usb: Remove unused ulpi phy header
- [PATCH v4 3/3] phy: Group vendor specific phy drivers
- [PATCH v4 2/3] phy: Move ULPI phy header out of drivers to include path
- [PATCH v3 02/09] arm64: dts: r8a7795: Tie Audio/SYS-DMAC to IPMMU-DS0/1 and MP1
- Re: [PATCH v2 0/4] arm: renesas: Add reset control properties
- Re: [PATCH] arm64: dts: r8a7795: Correct SATA device size to 2MiB
- [PATCH 06/32] arm64: dts: r8a7795: Use rgmii-txid phy-mode for EthernetAVB
- [PATCH 07/32] arm64: dts: r8a7795: salvator-x: Fix EthernetAVB PHY timing
- [PATCH 05/32] arm64: dts: h3ulcb: Update memory node to 4 GiB map
- [PATCH 03/32] arm64: dts: r8a7795: Add I2C for DVFS core to dtsi
- [PATCH 01/32] arm64: dts: r8a7796: Add I2C for DVFS device node
- [PATCH 04/32] arm64: dts: r8a7795: salvator-x: Enable I2C for DVFS device
- [PATCH 02/32] arm64: dts: r8a7796: salvator-x: Add I2C for DVFS device support
- [PATCH 24/32] arm64: dts: r8a7796: Add Cortex-A57 CPU cores
- [PATCH 13/32] arm64: dts: r8a7796: Enable SCIF DMA
- [PATCH 14/32] arm64: dts: r8a7796: salvator-x: add SCIF1 (DEBUG1)
- [PATCH 11/32] arm64: dts: r8a7796 dtsi: Add all HSCIF nodes
- [PATCH 08/32] arm64: dts: h3ulcb: Fix EthernetAVB PHY timing
- [PATCH 12/32] arm64: dts: r8a7796: Add all SCIF nodes
- [PATCH 10/32] arm64: dts: r8a7796: salvator-x: Fix EthernetAVB PHY timing
- [PATCH 09/32] arm64: dts: r8a7796: Use rgmii-txid phy-mode for EthernetAVB
- [PATCH 21/32] arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
- [PATCH 20/32] arm64: dts: r8a7795: Remove unit-addresses and regs from integrated caches
- [PATCH 18/32] arm64: dts: r8a7795: Upgrade to PSCI v1.0 to support Suspend-to-RAM
- [PATCH 15/32] arm64: dts: r8a7796: Enable HSCIF DMA
- [PATCH 16/32] arm64: dts: r8a7795: Add Cortex-A53 CPU cores
- [PATCH 17/32] arm64: dts: r8a7795: Add Cortex-A53 PMU node
- [PATCH 22/32] arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins
- [PATCH 19/32] arm64: dts: r8a7796: Upgrade to PSCI v1.0 to support Suspend-to-RAM
- [PATCH 28/32] arm64: dts: r8a7796: Add Cortex-A53 PMU node
- [PATCH 23/32] arm64: dts: r8a7795: Tidyup Audio-DMAC channel for DVC
- [PATCH 26/32] arm64: dts: r8a7796: Add CA53 L2 cache-controller node
- [PATCH 25/32] arm64: dts: r8a7796: Add Cortex-A57 PMU node
- [PATCH 30/32] arm64: dts: r8a7795: salvator-x: Drop superfluous status updates for frequency overrides
- [PATCH 29/32] arm64: dts: h3ulcb: Drop superfluous status update for frequency override
- [PATCH 27/32] arm64: dts: r8a7796: Add Cortex-A53 CPU cores
- [PATCH 31/32] arm64: dts: m3ulcb: Drop superfluous status update for frequency override
- [PATCH 32/32] arm64: dts: r8a7796: salvator-x: Drop superfluous status update for frequency override
- [GIT PULL] Renesas ARM Based SoC DT Updates for v4.12
- [PATCH 02/31] ARM: dts: r8a7743: Fix SCIFB0 dmas indentation
- [PATCH 03/31] ARM: dts: r8a7745: Fix SCIFB0 dmas indentation
- [PATCH 01/31] ARM: dts: r7s72100: update sdhi clock bindings
- [PATCH 04/31] ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS
- [PATCH 06/31] ARM: dts: r8a7743: Remove unit-address and reg from integrated cache
- [PATCH 05/31] ARM: dts: r8a73a4: Remove unit-addresses and regs from integrated caches
- [PATCH 07/31] ARM: dts: r8a7745: Remove unit-address and reg from integrated cache
- [PATCH 09/31] ARM: dts: r8a7791: Remove unit-address and reg from integrated cache
- [PATCH 14/31] ARM: dts: r7s72100: Add watchdog timer
- [PATCH 08/31] ARM: dts: r8a7790: Remove unit-addresses and regs from integrated caches
- [PATCH 13/31] ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVC
- [PATCH 11/31] ARM: dts: r8a7793: Remove unit-address and reg from integrated cache
- [PATCH 1/2] soc: renesas: Identify RZ/G1H
- [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.12
- [PATCH 30/31] ARM: dts: alt: Drop superfluous status update for frequency override
- [PATCH 2/2] soc: renesas: Identify RZ/G1N
- [GIT PULL] Renesas ARM Based SoC Drivers Updates for v4.12
- [PATCH 10/31] ARM: dts: r8a7792: Remove unit-address and reg from integrated cache
- [PATCH 12/31] ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
- [PATCH 15/31] ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
- [PATCH 16/31] ARM: dts: r8a7790: Add INTC-SYS clock to device tree
- [PATCH 19/31] ARM: dts: r8a7794: Add INTC-SYS clock to device tree
- [PATCH 17/31] ARM: dts: r8a7791: Add INTC-SYS clock to device tree
- [PATCH 20/31] ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVC
- [PATCH 18/31] ARM: dts: r8a7792: Add INTC-SYS clock to device tree
- [PATCH 22/31] ARM: dts: r8a7793: Add INTC-SYS clock to device tree
- [PATCH 24/31] ARM: dts: bockw: Drop superfluous status update for frequency override
- [PATCH 29/31] ARM: dts: gose: Drop superfluous status update for frequency override
- [PATCH 23/31] ARM: dts: porter: Always use status "okay" to enable devices
- [PATCH 31/31] ARM: dts: silk: Drop superfluous status update for frequency override
- [PATCH 26/31] ARM: dts: lager: Drop superfluous status update for frequency override
- [PATCH 21/31] ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVC
- [PATCH 27/31] ARM: dts: koelsch: Drop superfluous status updates for frequency overrides
- [PATCH 28/31] ARM: dts: porter: Drop superfluous status update for frequency override
- [PATCH 25/31] ARM: dts: marzen: Drop superfluous status update for frequency override
- [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.12
- [PATCH 1/2] ARM: shmobile: Document RZ/G1H SoC DT binding
- [PATCH 2/2] ARM: shmobile: Document RZ/G1N SoC DT binding
- [PATCH] arm64: dts: r8a7795: Correct SATA device size to 2MiB
- [PATCH v3 01/09] arm64: dts: r8a7795: Add IPMMU device nodes
- [PATCH v3 00/09] arm64: dts: r8a7795: IPMMU upstream integration V3
- [PATCH v3 09/09] arm64: dts: r8a7795: Enable IPMMU-VI, VP, MP1, DS0, DS1 and MM
- [PATCH v3 08/09] arm64: dts: r8a7795: Connect SATA to IPMMU-HC
- [PATCH v3 07/09] arm64: dts: r8a7795: Connect Ethernet-AVB to IPMMU-DS0
- [PATCH v3 06/09] arm64: dts: r8a7795: Point VSPI via FCPVI to IPMMU-VP
- [PATCH v3 05/09] arm64: dts: r8a7795: Point VSPBC/VSPBD via FCPVB to IPMMU-VP
- [PATCH v3 04/09] arm64: dts: r8a7795: Point FDP1 via FCPF to IPMMU-VP
- [PATCH v3 03/09] arm64: dts: r8a7795: Point DU/VSPD via FCPVD to IPMMU-VI
- Re: [PATCH] mmc: tmio: always get number of taps
- Re: [PATCH v2 0/4] arm: renesas: Add reset control properties
- Re: [PATCH] pinctrl: sh-pfc: Print correct pinmux info name
- Re: [PATCH] pinctrl: sh-pfc: Print correct pinmux info name
- [PATCH] pinctrl: sh-pfc: Print correct pinmux info name
- Re: [PATCH v2 3/7] thermal: rcar_gen3_thermal: check that TSC exists before memory allocation
- Re: [PATCH v2 4/7] thermal: rcar_gen3_thermal: record and check number of TSCs found
- Re: [PATCH v2 2/7] thermal: rcar_gen3_thermal: remove unneeded mutex
- [PATCH] media: platform: rcar_imr: add IMR-LX3 support
- Re: [PATCH 0/4] arm64: renesas: enable M3ULCB board peripherals
- Re: [PATCH v2] media: platform: rcar_imr: add IMR-LSX3 support
- [PATCH v2 3/7] thermal: rcar_gen3_thermal: check that TSC exists before memory allocation
- [PATCH v2 0/7] thermal: rcar_gen3_thermal: add support for interrupt triggerd trip points
- [PATCH v2 4/7] thermal: rcar_gen3_thermal: record and check number of TSCs found
- [PATCH v2 7/7] thermal: rcar_gen3_thermal: add suspend and resume support
- [PATCH v2 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- [PATCH v2 2/7] thermal: rcar_gen3_thermal: remove unneeded mutex
- [PATCH v2 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- [PATCH v2 6/7] thermal: rcar_gen3_thermal: store device match data in private structure
- Re: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- Re: [PATCH 1/5] rtc: rtc-sh: add support for rza series
- Re: [PATCH 2/5] rtc: Add rtc-sh
- Re: [PATCH v2] media: platform: rcar_imr: add IMR-LSX3 support
- Re: [PATCH v5] media: platform: Renesas IMR driver
- Re: [PATCH 2/5] rtc: Add rtc-sh
- Re: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- RE: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- RE: [PATCH 2/5] rtc: Add rtc-sh
- Re: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- Re: [PATCH 2/5] rtc: Add rtc-sh
- RE: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- RE: [PATCH 1/5] rtc: rtc-sh: add support for rza series
- RE: [PATCH 2/5] rtc: Add rtc-sh
- [PATCH 0/3] usb: host: xhci-plat: add support suspend/resume for R-Car
- [PATCH 1/3] usb: host: xhci-plat: enable clk in resume timing
- [PATCH 2/3] usb: host: xhci-plat: add resume_quirk()
- [PATCH 3/3] usb: host: xhci-plat: set resume_quirk() for R-Car controllers
- Re: [PATCH 2/7] thermal: rcar_gen3_thermal: fix probe error path
- Re: [PATCH 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- Re: [PATCH 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- [PATCH] mmc: tmio: always get number of taps
- Re: [PATCH 1/5] rtc: rtc-sh: add support for rza series
- Re: [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- Re: [PATCH 2/5] rtc: Add rtc-sh
- Re: [PATCHv5 1/4] Staging: ks7010: ks_wlan_ioctl.h: Removed mixed spaces/tabs
- Re: [PATCHv5 1/4] Staging: ks7010: ks_wlan_ioctl.h: Removed mixed spaces/tabs
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH v5] media: platform: Renesas IMR driver
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- [PATCH v2] media: platform: rcar_imr: add IMR-LSX3 support
- [PATCH 3/5] ARM: dts: r7s72100: add rtc clock to device tree
- [PATCH 1/5] rtc: rtc-sh: add support for rza series
- [PATCH 5/5] ARM: dts: rskrza1: add rtc DT support
- [PATCH 4/5] ARM: dts: r7s72100: add rtc to device tree
- [PATCH 0/5] rtc: Reuse rtc-sh driver to support RZ/A1
- [PATCH 2/5] rtc: Add rtc-sh
- RE: [PATCH 3/7] arm: dts: dt-bindings: Add Renesas RZ pinctrl header
- RE: [PATCH 1/7] pinctrl: Renesas RZ/A1 pin and gpio controller
- Re: [PATCH 3/7] arm: dts: dt-bindings: Add Renesas RZ pinctrl header
- Applied "ASoC: rcar: dma: remove unnecessary "volatile"" to the asoc tree
- Applied "ASoC: simple-card: use defined dev on probe()" to the asoc tree
- Applied "ASoC: simple-scu-card: use defined dev on probe()" to the asoc tree
- Applied "ASoC: simple-card: add new simple_priv_to_card() macro" to the asoc tree
- Applied "ASoC: simple-scu-card: add new simple_priv_to_card() macro" to the asoc tree
- [PATCH v2 2/4] arm64: dts: r8a7796: Add reset control properties
- [PATCH v2 3/4] ARM: dts: r8a7743: Add reset control properties
- [PATCH v2 0/4] arm: renesas: Add reset control properties
- [PATCH v2 4/4] ARM: dts: r8a7745: Add reset control properties
- [PATCH v2 1/4] arm64: dts: r8a7795: Add reset control properties
- Re: [PATCH 1/7] pinctrl: Renesas RZ/A1 pin and gpio controller
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrl
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrl
- Re: [PATCH] mmc: core: check also R1 response for stop commands
- [PULL REQUEST] renesas/topic/sdhi-dma-sync-v3 for renesas drivers
- Re: [PULL REQUEST] renesas/topic/sdhi-dma-sync-v3 for renesas drivers
- [RFC] mmc: tmio: always unmap DMA before waiting for interrupt
- Re: [PULL REQUEST] renesas/topic/sdhi-autocmd12-resp-v3 for renesas drivers
- Re: [PATCH v3 27/27] rcar-vin: enable support for r8a7796
- Re: [PATCH v3 27/27] rcar-vin: enable support for r8a7796
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- [PATCH] ASoC: rcar: dma: remove unnecessary "volatile"
- [PATCHv5 1/4] Staging: ks7010: ks_wlan_ioctl.h: Removed mixed spaces/tabs
- [PATCHv5 3/4] Staging: ks7010: ks_wlan_ioctl.h: Aligning parameters in function prototypes.
- [PATCHv5 4/4] Staging: ks7010: ks_wlan_ioctl.h: Wrap complex macros with parentheses
- [PATCHv5 2/4] Staging: ks7010: ks_wlan_ioctl.h: Remove trailing white space
- [PATCHv5 0/4] Staging: ks7010: ks_wlan_ioctl.h: checkpatch fixes
- Re: [PATCHv5 1/4] Staging: ks7010: ks_wlan_ioctl.h: Removed mixed spaces/tabs
- Re: [PATCHv5 4/4] Staging: ks7010: ks_wlan_ioctl.h: Wrap complex macros with parentheses
- Applied "ASoC: rcar: clear DE bit only in PDMACHCR when it stops" to the asoc tree
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- Re: [PATCH 0/2] pinctrl: sh-pfc: r8a7795: Misc fixes and cleanups
- Re: [PATCH 0/2] pinctrl: sh-pfc: r8a7795: Misc fixes and cleanups
- Re: [PATCH v3 06/27] rcar-vin: move max width and height information to chip information
- Re: [PATCH 03/16] rcar-vin: fix how pads are handled for v4l2 subdevice operations
- Re: [PATCH 03/16] rcar-vin: fix how pads are handled for v4l2 subdevice operations
- Re: [PATCH 01/16] rcar-vin: reset bytesperline and sizeimage when resetting format
- Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- [PATCH 4/4] ASoC: simple-scu-card: add new simple_priv_to_card() macro
- [PATCH 3/4] ASoC: simple-card: add new simple_priv_to_card() macro
- [PATCH 2/4] ASoC: simple-scu-card: use defined dev on probe()
- [PATCH 1/4] ASoC: simple-card: use defined dev on probe()
- [PATCH 0/4] ASoC: simple-card: tidyup unreadable code
- Re: [PATCHv5 4/4] Staging: ks7010: ks_wlan_ioctl.h: Wrap complex macros with parentheses
- RE: [PATCH] mmc: core: check also R1 response for stop commands
- [PATCHv5 2/4] Staging: ks7010: ks_wlan_ioctl.h: Remove trailing white space
- [PATCHv5 4/4] Staging: ks7010: ks_wlan_ioctl.h: Wrap complex macros with parentheses
- [PATCHv5 3/4] Staging: ks7010: ks_wlan_ioctl.h: Aligning parameters in function prototypes.
- [PATCHv5 1/4] Staging: ks7010: ks_wlan_ioctl.h: Removed mixed spaces/tabs
- [PATCH v3 04/27] media: entity: Swap pads if route is checked from source to sink
- [PATCH v3 05/27] rcar-vin: move chip information to own struct
- [PATCH v3 06/27] rcar-vin: move max width and height information to chip information
- [PATCH v3 03/27] media: entity: Add media_entity_has_route() function
- [PATCH v3 01/27] rcar-vin: add Gen3 devicetree bindings documentation
- [PATCH v3 09/27] rcar-vin: all Gen2 boards can scale simplify logic
- [PATCH v3 13/27] rcar-vin: do not cut height in two for top, bottom or alternate fields
- [PATCH v3 08/27] rcar-vin: move functions regarding scaling
- [PATCH v3 12/27] rcar-vin: read subdevice format for crop only when needed
- [PATCH v3 07/27] rcar-vin: change name of video device
- [PATCH v3 14/27] rcar-vin: move media bus configuration to struct rvin_info
- [PATCH v3 10/27] rcar-vin: do not reset crop and compose when setting format
- [PATCH v3 17/27] rcar-vin: prepare digital notifier for group notifier
- [PATCH v3 18/27] rcar-vin: add flag to switch to media controller mode
- [PATCH v3 25/27] rcar-vin: extend {start,stop}_streaming to work with media controller
- [PATCH v3 23/27] rcar-vin: parse Gen3 OF and setup media graph
- [PATCH v3 27/27] rcar-vin: enable support for r8a7796
- [PATCH v3 26/27] rcar-vin: enable support for r8a7795
- [PATCH v3 21/27] rcar-vin: add group allocator functions
- [PATCH v3 20/27] rcar-vin: register a media pad if running in media controller mode
- [PATCH v3 22/27] rcar-vin: add chsel information to rvin_info
- [PATCH v3 24/27] rcar-vin: add link notify for Gen3
- [PATCH v3 19/27] rcar-vin: use different v4l2 operations in media controller mode
- [PATCH v3 15/27] rcar-vin: enable Gen3 hardware configuration
- [PATCH v3 16/27] rcar-vin: add functions to manipulate Gen3 CHSEL value
- [PATCH v3 11/27] rcar-vin: do not allow changing scaling and composing while streaming
- [PATCH v3 02/27] media: entity: Add has_route entity operation
- [PATCH v3 00/27] rcar-vin: Add Gen3 with media controller support
- [PATCH 16/16] rcar-vin: fix bug in pixelformat selection
- [PATCH 14/16] rcar-vin: make use of video_device_alloc() and video_device_release()
- [PATCH 15/16] rcar-vin: add missing error check to propagate error
- [PATCH 13/16] rcar-vin: refactor and fold in function after stall handling rework
- [PATCH 12/16] rcar-vin: allow switch between capturing modes when stalling
- [PATCH 10/16] rcar-vin: move functions which acts on hardware
- [PATCH 09/16] rcar-vin: decrease buffers needed to capture
- [PATCH 07/16] rcar-vin: move pad lookup to async bound handler
- [PATCH 08/16] rcar-vin: use pad information when verifying media bus format
- [PATCH 11/16] rcar-vin: select capture mode based on free buffers
- [PATCH 05/16] rcar-vin: move subdev source and sink pad index to rvin_graph_entity
- [PATCH 06/16] rcar-vin: refactor pad lookup code
- [PATCH 04/16] rcar-vin: fix standard in input enumeration
- [PATCH 02/16] rcar-vin: use rvin_reset_format() in S_DV_TIMINGS
- [PATCH 01/16] rcar-vin: reset bytesperline and sizeimage when resetting format
- [PATCH 03/16] rcar-vin: fix how pads are handled for v4l2 subdevice operations
- [PATCH 00/16] rcar-vin: fix issues with format and capturing
- Re: [PATCH] mm, gup: fix typo in gup_p4d_range()
- Re: [PATCH v3 0/4] mmc: tmio: properly report status from autocmd12
- Re: [PATCH v2] mmc: host: tmio: ensure end of DMA and SD access are in sync
- Re: [PATCH] mmc: core: check also R1 response for stop commands
- RE: [PATCH] mmc: core: check also R1 response for stop commands
- [PULL REQUEST] renesas/topic/sdhi-autocmd12-resp-v3 for renesas drivers
- [PATCH v3 4/4] mmc: host: tmio: fill in response from auto cmd12
- [PATCH v3 0/4] mmc: tmio: properly report status from autocmd12
- [PATCH v3 1/4] mmc: host: tmio: use defines for CTL_STOP_INTERNAL_ACTION values
- [PATCH v3 2/4] mmc: host: tmio: fix minor typos in comments
- [PATCH v3 3/4] mmc: host: tmio: don't BUG on unsupported stop commands
- [PATCH] mmc: core: check also R1 response for stop commands
- Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- RE: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- Re: [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- From: Krzysztof Kozlowski
- [RESEND PATCH v3 2/2] phy: Group vendor specific phy drivers
- [PATCH v3 2/2] phy: Group vendor specific phy drivers
- Re: [PATCH v2 0/2] usb: host: [eo]hci-plat: set hcd->phy to avoid phy_get_() in usb_add_hcd()
- [PATCH] ASoC: rcar: clear DE bit only in PDMACHCR when it stops
- Re: [PATCH 1/7] clk: renesas: r8a7795: Correct parent clock and sort order for Audio DMACs
- [PATCH v3] phy: rcar-gen3-usb2: fix implementation for runtime PM
- RE: [PATCH v2] phy: rcar-gen3-usb2: fix implementation for runtime PM
- Re: [GIT PULL] Renesas ARM64 Based SoC Defconfig Updates for v4.12
- Re: [PATCH 1/2] Formatting updates to remove checkpatch warnings in ks_wlan_ioctl.h.
- [PATCH] media: platform: rcar_imr: add IMR-LSX3 support
- Re: [PATCH 0/4] iio: adc: Maxim max961x driver
- Re: [PATCH RESEND 1/1] media: platform: Renesas IMR driver
- [PATCH 2/3] soc: renesas: rcar-sysc: Add support for fixing up power areas
- [PATCH 3/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
- [PATCH 0/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
- [PATCH 1/3] soc: renesas: Register SoC device early
- [PATCH v2 0/4] pinctrl: sh-pfc: Add support for R-Car H3 ES2.0
- [PATCH v2 3/4] pinctrl: sh-pfc: r8a7795: Add SCIF support
- [PATCH v2 4/4] pinctrl: sh-pfc: r8a7795: Add SCIF_CLK support
- [PATCH v2 2/4] clk: renesas: Add r8a7795 ES2.0 CPG Core Clock Definitions
- [PATCH v2 1/4] pinctrl: sh-pfc: Update info pointer after SoC-specific init
- [PATCH v2 3/4] clk: renesas: r8a7795: Add support for R-Car H3 ES2.0
- [PATCH v2 4/4] clk: renesas: rcar-gen3-cpg: Add support for RCLK on R-Car H3 ES2.0
- [PATCH v2 1/4] clk: renesas: cpg-mssr: Add support for fixing up clock tables
- [PATCH v2 0/4] clk: renesas: Add support for R-Car H3 ES2.0
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrl
- [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrl
- [PATCH 0/2] pinctrl: sh-pfc: r8a7795: Misc fixes and cleanups
- [PATCH 2/2] pinctrl: sh-pfc: r8a7795: Restore sort order
- [PATCH 5/7] clk: renesas: r8a7796: Reformat core clock table
- [PATCH 7/7] clk: renesas: rcar-gen3: Add workaround for PLL0/2/4 errata on H3 ES1.0
- [PATCH 1/7] clk: renesas: r8a7795: Correct parent clock and sort order for Audio DMACs
- [PATCH 0/7] clk: renesas: rcar-gen3: Misc fixes and cleanups
- [PATCH 4/7] clk: renesas: r8a7795: Reformat core clock table
- [PATCH 6/7] clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()
- [PATCH 3/7] clk: renesas: r8a7796: Correct name of watchdog clock
- [PATCH 2/7] clk: renesas: r8a7795: Correct name of watchdog clock
- [PATCH 0/3] dmaengine: rcar-dmac: Priority and slow mode prototypes
- [PATCH 3/3] arm64: dts: r8a7795: Use slow mode for TX on SCIF2/DEBUG1
- [PATCH 2/3] dmaengine: rcar-dmac: Slow mode prototype
- [PATCH 1/3] dmaengine: rcar-dmac: Priority handling prototype
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- Re: [PATCH 1/2] [RFC] base: soc: Let soc_device_match() return no match when called too early
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- Re: [PATCH v2] phy: rcar-gen3-usb2: fix implementation for runtime PM
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- Re: timeout waiting for hardware interrupt CMD19
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- [PATCH v2] phy: rcar-gen3-usb2: fix implementation for runtime PM
- RE: [PATCH] phy: rcar-gen3-usb2: fix implementation for runtime PM
- Re: [PATCH 0/4] ARM: shmobile: Document and identify RZ/G1H and RZ/G1N
- Re: [PATCH 00/13] arm: dts: renesas: Tidy-up status
- Re: [PATCH v2 0/6] ARM: dts: renesas: Add INTC-SYS clock to device tree
- Re: [PATCH] arm64: dts: r8a7796: add IMR-LX4 support
- Re: [PATCH] phy: rcar-gen3-usb2: fix implementation for runtime PM
- [PATCH v2 0/2] usb: host: [eo]hci-plat: set hcd->phy to avoid phy_get_() in usb_add_hcd()
- [PATCH v2 2/2] usb: host: ohci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH v2 1/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH] phy: rcar-gen3-usb2: fix implementation for runtime PM
- RE: [PATCH/RFC 1/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- Re: [PATCH v3 3/3] iommu/ipmmu-vmsa: Hook up r8a7796 DT matching code
- [PATCH v3 3/3] iommu/ipmmu-vmsa: Hook up r8a7796 DT matching code
- [PATCH v3 2/3] iommu/ipmmu-vmsa: Increase maximum micro-TLBS to 48
- [PATCH v3 1/3] iommu/ipmmu-vmsa: Add r8a7796 DT binding
- [PATCH v3 0/3] iommu/ipmmu-vmsa: r8a7796 support V3
- timeout waiting for hardware interrupt CMD19
- Re: [PATCH/RFC 1/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH 0/4] ARM: shmobile: Document and identify RZ/G1H and RZ/G1N
- [PATCH 1/4] ARM: shmobile: Document RZ/G1H SoC DT binding
- [PATCH 4/4] soc: renesas: Identify RZ/G1N
- [PATCH 3/4] soc: renesas: Identify RZ/G1H
- [PATCH 2/4] ARM: shmobile: Document RZ/G1N SoC DT binding
- [PATCH 08/13] ARM: dts: alt: Drop superfluous status update for frequency override
- [PATCH 02/13] ARM: dts: bockw: Drop superfluous status update for frequency override
- [PATCH 13/13] arm64: dts: r8a7796: salvator-x: Drop superfluous status update for frequency override
- [PATCH 00/13] arm: dts: renesas: Tidy-up status
- [PATCH 07/13] ARM: dts: gose: Drop superfluous status update for frequency override
- [PATCH 04/13] ARM: dts: lager: Drop superfluous status update for frequency override
- [PATCH 10/13] arm64: dts: h3ulcb: Drop superfluous status update for frequency override
- [PATCH 06/13] ARM: dts: porter: Drop superfluous status update for frequency override
- [PATCH 05/13] ARM: dts: koelsch: Drop superfluous status updates for frequency overrides
- [PATCH 12/13] arm64: dts: m3ulcb: Drop superfluous status update for frequency override
- [PATCH 03/13] ARM: dts: marzen: Drop superfluous status update for frequency override
- [PATCH 01/13] ARM: dts: porter: Always use status "okay" to enable devices
- [PATCH 11/13] arm64: dts: r8a7795: salvator-x: Drop superfluous status updates for frequency overrides
- [PATCH 09/13] ARM: dts: silk: Drop superfluous status update for frequency override
- RE: [PATCH/RFC 2/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH/RFC 2/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH/RFC 1/2] usb: host: ehci-platform: set hcd->phy to avoid phy_get() in usb_add_hcd()
- [PATCH/RFC 0/2] usb: host: [eo]hci-plat: set hcd->phy to avoid phy_get_() in usb_add_hcd()
- Re: [PATCH] arm64: dts: r8a7796: add IMR-LX4 support
- Re: [PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer
- Re: [PATCH v2 0/6] ARM: dts: renesas: Add INTC-SYS clock to device tree
- Re: [PATCH v5 00/10] drm: bridge: dw-hdmi: Refactor PHY support
- Re: [PATCH v2 0/6] ARM: dts: renesas: Add INTC-SYS clock to device tree
- Re: [PATCH] arm64: dts: r8a7796: add IMR-LX4 support
- [PATCH] arm64: defconfig: Enable SH Mobile I2C controller
- [GIT PULL] Renesas ARM64 Based SoC Defconfig Updates for v4.12
- Re: [PATCH v2 0/5] arm64: dts: r8a7796: Add Secondary CPU Cores
- Re: [PATCH 0/4] ARM/ARM64: renesas: Tidyup Audio-DMAC channel for DVC
- [PATCH v5] media: platform: Renesas IMR driver
- [PATCH 2/2] [RFC] base: soc: Allow early registration of a single SoC device
- [PATCH 0/2] [RFC] base: soc: soc_device_match() improvements
- [PATCH 1/2] [RFC] base: soc: Let soc_device_match() return no match when called too early
- RE: [PATCH 3/7] arm: dts: dt-bindings: Add Renesas RZ pinctrl header
- RE: [PATCH 1/7] pinctrl: Renesas RZ/A1 pin and gpio controller
- Re: [PATCH] i2c: riic: fix restart condition
- Re: [PATCH v7 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access
- Re: [PATCH v3 02/09] iommu/ipmmu-vmsa: Add optional root device feature
- Re: [PATCH v3 01/09] iommu/ipmmu-vmsa: Introduce features, break out alias
- Re: [PATCH v3 09/09] iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
- Re: [PATCH v3 03/09] iommu/ipmmu-vmsa: Enable multi context support
- Re: [PATCH v3 06/09] iommu/ipmmu-vmsa: Write IMCTR twice
- Re: [PATCH v3 04/09] iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
- Re: [PATCH v7 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access
- RE: [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1
- RE: [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1
- Re: [PATCH v4 0/3] ARM: l2c: add l2c support for RZ/A1
- From: Russell King - ARM Linux
- Re: [PATCH v3 09/09] iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
- Re: [PATCH v3 02/09] iommu/ipmmu-vmsa: Add optional root device feature
- Re: [PATCH v3 04/09] iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
- Re: [PATCH v7 05/07] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
- Re: [PATCH v7 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access
- Re: [PATCH v3 06/09] iommu/ipmmu-vmsa: Write IMCTR twice
- Re: [PATCH v3 03/09] iommu/ipmmu-vmsa: Enable multi context support
- Re: [PATCH v3 01/09] iommu/ipmmu-vmsa: Introduce features, break out alias
- [PATCH v3 05/09] iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master
- Re: [PATCH v7 01/07] iommu/ipmmu-vmsa: Remove platform data handling
- [PATCH v3 04/09] iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE()
- [PATCH v3 06/09] iommu/ipmmu-vmsa: Write IMCTR twice
- [PATCH v3 07/09] iommu/ipmmu-vmsa: Make IMBUSCTR setup optional
- [PATCH v3 08/09] iommu/ipmmu-vmsa: Allow two bit SL0
- [PATCH v3 09/09] iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code
- [PATCH v3 03/09] iommu/ipmmu-vmsa: Enable multi context support
- [PATCH v3 01/09] iommu/ipmmu-vmsa: Introduce features, break out alias
- [PATCH v3 02/09] iommu/ipmmu-vmsa: Add optional root device feature
- [PATCH v3 00/09] iommu/ipmmu-vmsa: r8a7795 support V3
- Re: [PATCH v7 04/07] iommu/ipmmu-vmsa: Break out domain allocation code
- Re: [PATCH v7 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access
- [PATCH][RFC] ASoC: core: remove pointless auxiliary from snd_soc_component
- Re: [PATCH 0/4] ARM/ARM64: renesas: Tidyup Audio-DMAC channel for DVC
- Re: [PATCH 6/7] thermal: rcar_gen3_thermal: store device match data in private structure
- Re: [PATCH 7/7] thermal: rcar_gen3_thermal: add suspend and resume support
- Re: [PATCH 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- Re: [PATCH 4/7] thermal: rcar_gen3_thermal: record more information about each TSC
- Re: [PATCH 3/7] thermal: rcar_gen3_thermal: remove unneeded mutex
- [PATCH v4] media: platform: Renesas IMR driver
- Re: [PATCH 2/7] thermal: rcar_gen3_thermal: fix probe error path
- Re: [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- Re: [PATCH 0/4] iio: adc: Maxim max961x driver
- [PATCH v2 3/5] arm64: dts: r8a7796: Add CA53 L2 cache-controller node
- [PATCH v2 0/5] arm64: dts: r8a7796: Add Secondary CPU Cores
- [PATCH v2 1/5] arm64: dts: r8a7796: Add Cortex-A57 CPU cores
- [PATCH v2 4/5] arm64: dts: r8a7796: Add Cortex-A53 CPU cores
- [PATCH v2 5/5] arm64: dts: r8a7796: Add Cortex-A53 PMU node
- Re: [PATCH 4/7] thermal: rcar_gen3_thermal: record more information about each TSC
- [PATCH v2 2/5] arm64: dts: r8a7796: Add Cortex-A57 PMU node
- [PATCH v5] arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU
- [renesas-drivers:topic/renesas-overlays 17/88] (.text+0x21): multiple definition of `of_changeset_add_property_copy'
- Re: [PATCH 6/7] thermal: rcar_gen3_thermal: store device match data in private structure
- Re: [PATCH 4/7] thermal: rcar_gen3_thermal: record more information about each TSC
- Re: [GIT PULL FOR renesas-drivers] Fix suspend/resume and race on M2M pipelines
- Re: [GIT PULL] v4l: vsp1: Partition phase developments
- renesas-drivers-2017-03-07-v4.11-rc1
- Re: [PATCH 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- Re: [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- Re: [PATCH 7/7] thermal: rcar_gen3_thermal: add suspend and resume support
- Re: [PATCH 2/7] thermal: rcar_gen3_thermal: fix probe error path
- Re: [PATCH 3/7] thermal: rcar_gen3_thermal: remove unneeded mutex
- Re: [PATCH v2 1/6] ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
- Re: [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- Re: [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- Re: [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- [PATCH 1/4] ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVC
- [PATCH 3/4] ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVC
- Re: [PATCH v2 1/6] ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
- [PATCH 2/4] ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVC
- Re: [PATCH 0/8] ARM: dts: renesas: Remove unit-addresses and regs from integrated caches
- Re: [PATCH] i2c: riic: fix restart condition
- Re: [PATCH 0/4] ARM/ARM64: renesas: Tidyup Audio-DMAC channel for DVC
- [PATCH 4/4] arm64: renesas: r8a7795: Tidyup Audio-DMAC channel for DVC
- [PATCH 0/4] ARM/ARM64: renesas: Tidyup Audio-DMAC channel for DVC
- [PATCH v7 00/07] iommu/ipmmu-vmsa: IPMMU multi-arch update V7
- [PATCH v7 07/07] iommu/ipmmu-vmsa: Drop LPAE Kconfig dependency
- [PATCH v7 06/07] iommu/ipmmu-vmsa: ARM and ARM64 archdata access
- [PATCH v7 01/07] iommu/ipmmu-vmsa: Remove platform data handling
- [PATCH v7 04/07] iommu/ipmmu-vmsa: Break out domain allocation code
- [PATCH v7 05/07] iommu/ipmmu-vmsa: Add new IOMMU_DOMAIN_DMA ops
- [PATCH v7 02/07] iommu/ipmmu-vmsa: Rework interrupt code and use bitmap for context
- [PATCH v7 03/07] iommu/ipmmu-vmsa: Break out utlb parsing code
- [PATCH v3] media: platform: Renesas IMR driver
- [PATCH] i2c: riic: fix restart condition
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- [PATCH 7/7] thermal: rcar_gen3_thermal: add suspend and resume support
- [PATCH 6/7] thermal: rcar_gen3_thermal: store device match data in private structure
- [PATCH 4/7] thermal: rcar_gen3_thermal: record more information about each TSC
- [PATCH 1/7] thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
- [PATCH 3/7] thermal: rcar_gen3_thermal: remove unneeded mutex
- [PATCH 5/7] thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
- [PATCH 0/7] thermal: rcar_gen3_thermal: add support for interrupt triggerd trip points
- [PATCH 2/7] thermal: rcar_gen3_thermal: fix probe error path
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH 1/4] v4l: vsp1: Implement partition algorithm restrictions
- [PATCH v2 0/6] ARM: dts: renesas: Add INTC-SYS clock to device tree
- [PATCH v2 6/6] ARM: dts: r8a7794: Add INTC-SYS clock to device tree
- [PATCH v2 3/6] ARM: dts: r8a7791: Add INTC-SYS clock to device tree
- [PATCH v2 1/6] ARM: dts: r8a73a4: Add INTC-SYS clock to device tree
- [PATCH v2 2/6] ARM: dts: r8a7790: Add INTC-SYS clock to device tree
- [PATCH v2 4/6] ARM: dts: r8a7792: Add INTC-SYS clock to device tree
- [PATCH v2 5/6] ARM: dts: r8a7793: Add INTC-SYS clock to device tree
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- [PATCH 3/8] ARM: dts: r8a7745: Remove unit-address and reg from integrated cache
- [PATCH 8/8] ARM: dts: r8a7794: Remove unit-address and reg from integrated cache
- [PATCH 4/8] ARM: dts: r8a7790: Remove unit-addresses and regs from integrated caches
- [PATCH 6/8] ARM: dts: r8a7792: Remove unit-address and reg from integrated cache
- [PATCH 7/8] ARM: dts: r8a7793: Remove unit-address and reg from integrated cache
- [PATCH 5/8] ARM: dts: r8a7791: Remove unit-address and reg from integrated cache
- [PATCH 1/8] ARM: dts: r8a73a4: Remove unit-addresses and regs from integrated caches
- [PATCH 2/8] ARM: dts: r8a7743: Remove unit-address and reg from integrated cache
- [PATCH 0/8] ARM: dts: renesas: Remove unit-addresses and regs from integrated caches
- Re: [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- [PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- Re: [PATCH 1/4] v4l: vsp1: Implement partition algorithm restrictions
- Re: [PATCH v2] drm: rcar-du: Arm the page flip event after queuing the page flip
- Re: [PATCH v2] drm: rcar-du: Arm the page flip event after queuing the page flip
- Re: [PATCH v2.2] v4l: Clearly document interactions between formats, controls and buffers
- [i2c-tools PATCH v2] i2ctransfer: add new tool
- Re: [PATCH v2.3] v4l: Clearly document interactions between formats, controls and buffers
- [PATCH v2.3] v4l: Clearly document interactions between formats, controls and buffers
- RE: Possible Regression caused by "[PATCH] i2c: riic: correctly finish transfers"
- Possible Regression caused by "[PATCH] i2c: riic: correctly finish transfers"
- Re: [PATCH v2.2] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2.2] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v4 2/4] drm: bridge: Add LVDS encoder driver
- Re: [PATCH v2.2] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH/RFC v2 0/4] iommu/ipmmu-vmsa: IPMMU slave device whitelist V2
- Re: [GIT PULL FOR renesas-drivers] R-Car Gen3 HDMI output support
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v3 0/5] R-Car H3 HDMI output DT integration
- Re: [PATCHv2] arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins
- Re: [PATCH v2 3/3] arm64: renesas: r8a7796: Enable SCIF DMA
- Re: [PATCH 0/2] arm64: dts: renesas: Remove unit-addresses and regs from integrated caches
- Re: [GIT PULL FOR renesas-drivers] R-Car Gen3 HDMI output support
- Re: [GIT PULL FOR renesas-drivers] VSP1 rotation and histogram
- Re: [PATCH 1/4] v4l: vsp1: Implement partition algorithm restrictions
- RE: [PATCH] phy: core: fix the condition to enable pm_runtime in phy_create()
- [GIT PULL FOR renesas-drivers] DU + VSP display flicker fixes
- [GIT PULL FOR renesas-drivers] VSP1 rotation and histogram
- [PATCH v2.1 3/3] v4l: vsp1: wpf: Implement rotation support
- [GIT PULL FOR renesas-drivers] R-Car Gen3 HDMI output support
- [PATCH v3 4/5] arm64: dts: r8a7795: salvator-x: Add DU0 and DU3 external dot clocks
- [PATCH v3 3/5] arm64: dts: r8a7795: salvator-x: Add DU1 and DU2 external dot clocks
- [PATCH v3 0/5] R-Car H3 HDMI output DT integration
- [PATCH v3 5/5] ARM: shmobile: dts: Switch to panel-lvds bindings for Mitsubishi panels
- [PATCH v3 1/5] arm64: dts: r8a7795: Add HDMI encoder support
- [PATCH v3 2/5] arm64: dts: r8a7795: salvator-x: Enable HDMI outputs
- [PATCH v3 4/9] drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE
- [PATCH v3 8/9] drm: rcar-du: Add DPLL support
- [PATCH v3 6/9] drm: rcar-du: Add Gen3 HDMI encoder support
- [PATCH v3 7/9] drm: rcar-du: Skip disabled outputs
- [PATCH v3 5/9] dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
- [PATCH v3 9/9] drm: rcar-du: Add HDMI outputs to R8A7795 device description
- [PATCH v3 3/9] drm: rcar-du: Replace manual bridge implementation with DRM bridge
- [PATCH v3 2/9] drm: rcar-du: Add support for LVDS mode selection
- [PATCH v3 1/9] drm: rcar-du: Use the DRM panel API
- [PATCH v3 0/9] R-Car Gen3 HDMI output support
- [PATCH v5.1 06/10] drm: bridge: dw-hdmi: Create PHY operations
- [PATCH v5.1 05/10] drm: bridge: dw-hdmi: Fix the PHY power up sequence
- [PATCH v5.1 04/10] drm: bridge: dw-hdmi: Fix the PHY power down sequence
- Re: [PATCHv2] arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins
- Re: [PATCH v3 2/3] v4l: vsp1: Extend VSP1 module API to allow DRM callbacks
- Re: [PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1
- Re: [PATCH v3 1/3] v4l: vsp1: Postpone frame end handling in event of display list race
- Re: [PATCH v3 2/3] v4l: vsp1: Extend VSP1 module API to allow DRM callbacks
- [PATCH 2/2] Formatting updates to resolve checkpatch errors in ks_wlan_ioctl.h.
- [PATCH 1/2] Formatting updates to remove checkpatch warnings in ks_wlan_ioctl.h.
- [PATCH v2.2] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2.1] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1
- Re: [PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer
- Re: [PATCH v6 2/3] watchdog: renesas-wdt: add support for rza
- Re: [PATCH v6 1/3] watchdog: add rza_wdt driver
- [PATCH v3 3/3] drm: rcar-du: Register a completion callback with VSP1
- [PATCH v3 2/3] v4l: vsp1: Extend VSP1 module API to allow DRM callbacks
- [PATCH v3 1/3] v4l: vsp1: Postpone frame end handling in event of display list race
- [PATCH v3 0/3] RCAR-DU, VSP1: Prevent pre-emptive frame flips on VSP1-DRM pipelines
- [PATCH v2.1] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH 0/4] iio: adc: Maxim max961x driver
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH 3/4] iio: adc: Add max9611/9612 ADC driver
- [PATCH v2] drm: rcar-du: Arm the page flip event after queuing the page flip
- Re: [PATCH v2 2/3] v4l: vsp1: Postpone page flip in event of display list race
- [PATCH] drm: rcar-du: Remove wait field from rcar_du_device structure
- Re: [PATCH v2 1/3] v4l: vsp1: extend VSP1 module API to allow DRM callbacks
- Re: [PATCH v2 3/3] drm: rcar-du: Register a completion callback with VSP1
- [PATCH v6 1/3] watchdog: add rza_wdt driver
- [PATCH v6 0/3] watchdog: add wdt and reset for renesas r7s72100
- [PATCH v6 3/3] ARM: dts: r7s72100: Add watchdog timer
- [PATCH v6 2/3] watchdog: renesas-wdt: add support for rza
- RE: [PATCH v5 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v5 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- [PATCH] drm: rcar-du: Arm the page flip event after queuing the page flip.
- Re: [PATCH v2 3/3] drm: rcar-du: Register a completion callback with VSP1
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- [PATCH v2 1/3] v4l: vsp1: extend VSP1 module API to allow DRM callbacks
- [PATCH v2 3/3] drm: rcar-du: Register a completion callback with VSP1
- [PATCH v2 2/3] v4l: vsp1: Postpone page flip in event of display list race
- [PATCH v2 0/3] RCAR-DU, VSP1: Prevent pre-emptive frame flips on VSP1-DRM pipelines
- [PATCH v5.1 10/10] drm: bridge: dw-hdmi: Move the driver to a separate directory.
- Re: [RFC PATCH 1/3] v4l: vsp1: Register pipe with output WPF
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- [PATCH v5 2/3] watchdog: renesas-wdt: add support for rza
- [PATCH v5 1/3] watchdog: add rza_wdt driver
- [PATCH v5 0/3] watchdog: add wdt and reset for renesas r7s72100
- [PATCH v5 3/3] ARM: dts: r7s72100: Add watchdog timer
- [PATCH v5 09/10] drm: bridge: dw-hdmi: Switch to regmap for register access
- [PATCH v5 10/10] drm: bridge: dw-hdmi: Move the driver to a separate directory.
- [PATCH v5 08/10] drm: bridge: dw-hdmi: Remove device type from platform data
- [PATCH v5 00/10] drm: bridge: dw-hdmi: Refactor PHY support
- [PATCH v5 04/10] drm: bridge: dw-hdmi: Fix the PHY power down sequence
- [PATCH v5 03/10] drm: bridge: dw-hdmi: Enable CSC even for DVI
- [PATCH v5 02/10] drm: bridge: dw-hdmi: Move CSC configuration out of PHY code
- [PATCH v5 01/10] drm: bridge: dw-hdmi: Remove unused functions
- [PATCH v5 06/10] drm: bridge: dw-hdmi: Create PHY operations
- [PATCH v5 07/10] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- [PATCH v5 05/10] drm: bridge: dw-hdmi: Fix the PHY power up sequence
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- Re: [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- Re: [PATCH] drm: rcar-du: Make sure DRM planes are created by VSP1
- Re: [PATCH] drm: rcar-du: Make sure planes are created by VSP
- [PATCH] drm: rcar-du: Make sure planes are created by VSP
- [PATCH] dt-bindings: drm: rcar-du: Document optional reset properties
- RE: [PATCH 4/7] arm: dts: r7s72100: Add pin controller node
- Re: [PATCH] drm: rcar-du: Make sure DRM planes are created by VSP1
- [PATCH 1/2] arm64: dts: r8a7795: Remove unit-addresses and regs from integrated caches
- [PATCH 2/2] arm64: dts: r8a7796: Remove unit-address and reg from integrated cache
- [PATCH 0/2] arm64: dts: renesas: Remove unit-addresses and regs from integrated caches
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH v2 3/3] arm64: renesas: r8a7796: Enable SCIF DMA
- [PATCH] phy: core: fix the condition to enable pm_runtime in phy_create()
- Re: [RFC PATCH 3/3] drm: rcar-du: Register a completion callback with VSP1
- Re: [PATCH] drm: rcar-du: Make sure DRM planes are created by VSP1
- Re: [PATCH] media: platform: Renesas IMR driver
- Re: [RFC PATCH 2/3] v4l: vsp1: extend VSP1 module API to allow DRM callback registration
- [PATCH] media: platform: Renesas IMR driver
- Re: [PATCH v4 1/3] watchdog: add rza_wdt driver
- Re: [PATCH 4/7] arm: dts: r7s72100: Add pin controller node
- [PATCH] drm: rcar-du: Make sure DRM planes are created by VSP1
- Re: [PATCH v4 1/9] drm: bridge: dw-hdmi: Remove unused functions
- Re: [RFC PATCH 3/3] drm: rcar-du: Register a completion callback with VSP1
- Re: [RFC PATCH 2/3] v4l: vsp1: extend VSP1 module API to allow DRM callback registration
- Re: [RFC PATCH 1/3] v4l: vsp1: Register pipe with output WPF
- RE: [PATCH v4 1/3] watchdog: add rza_wdt driver
- RE: [PATCH 4/7] arm: dts: r7s72100: Add pin controller node
- RE: Renesas RZ/A1 pin and gpio controller
- RE: [PATCH v4 1/3] watchdog: add rza_wdt driver
- RE: [PATCH v4 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v4 1/3] watchdog: add rza_wdt driver
- [PATCH v4 1/4] devicetree/bindings: display: bridge: Add LVDS encoder DT bindings
- Re: [PATCH v4 8/9] drm: bridge: dw-hdmi: Remove device type from platform data
- Re: [PATCH v4 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v4 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v2 0/2] arm64: dts: renesas: Upgrade to PSCI v1.0 to support Suspend-to-RAM
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- Re: [PATCH v2 2/3] v4l: Clearly document interactions between formats, controls and buffers
- Re: [PATCH v4 0/2] arm64: dts: r8a7795: Add Cortex-A53 CPU cores and PMU
- Re: [PATCH v2 4/4] arm64: renesas: r8a7796: Enable HSCIF DMA
- Re: [PATCH 0/3] arm64: dts: r8a7796: Add Secondary CPU Cores
- Re: [PATCH v4 1/3] watchdog: add rza_wdt driver
- Re: [PATCH v2 3/3] arm64: renesas: r8a7796: Enable SCIF DMA
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- [PATCH v4 2/3] watchdog: renesas-wdt: add support for rza
- [PATCH v4 1/3] watchdog: add rza_wdt driver
- [PATCH v4 0/3] watchdog: add wdt and reset for renesas r7s72100
- [PATCH v4 3/3] ARM: dts: r7s72100: Add watchdog timer
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- RE: [PATCH v3 3/3] ARM: dts: r7s72100: Add watchdog timer
- Re: [PATCH v4 7/9] drm: bridge: dw-hdmi: Add support for custom PHY configuration
- Re: [PATCH v4 5/9] drm: bridge: dw-hdmi: Fix the PHY power up sequence
- Re: [PATCH v4 6/9] drm: bridge: dw-hdmi: Create PHY operations
- Re: [PATCH v4 4/9] drm: bridge: dw-hdmi: Fix the PHY power down sequence
- Re: [PATCH v4 0/9] drm: bridge: dw-hdmi: Refactor PHY support
- Re: [PATCH v4 0/9] drm: bridge: dw-hdmi: Refactor PHY support
- Re: [PATCH v4 2/9] drm: bridge: dw-hdmi: Move CSC configuration out of PHY code
[Index of Archives]
[Linux Samsung SOC]
[Linux Wireless]
[Linux Bluetooth]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Linux ATA RAID]
[Bugtraq]