On Mon, Oct 16, 2017 at 11:13:32AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Mon, Oct 16, 2017 at 9:58 AM, Simon Horman
> <horms+renesas@xxxxxxxxxxxx> wrote:
> > Provide an example of the usage of the DT bindings for TMIO
> > in their documentation. The example given is for the r8a7790 (R-Car H2).
> >
> > Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> > ---
> > v2
> > * Correct description of example, it is for the r8a7790 (R-Car H2)
> > rather than the r8a7779 (R-Car H1)
>
> Thanks for the update!
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> > --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> > +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> > @@ -43,3 +43,57 @@ Optional properties:
> > - pinctrl-names: should be "default", "state_uhs"
> > - pinctrl-0: should contain default/high speed pin ctrl
> > - pinctrl-1: should contain uhs mode pin ctrl
> > +
> > +Example: R8A7790 (R-Car H2) SDHI controller nodes
> > +
> > + sdhi0: sd@ee100000 {
> > + compatible = "renesas,sdhi-r8a7790";
> > + reg = <0 0xee100000 0 0x328>;
> > + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
>
> You may want to copy the example from the current r8a7790.dtsi, which
> uses the newer CPG/MSSR bindings.
Thanks, v3 sent.
