Hi Simon,
On Mon, Oct 16, 2017 at 9:58 AM, Simon Horman
<horms+renesas@xxxxxxxxxxxx> wrote:
> Provide an example of the usage of the DT bindings for TMIO
> in their documentation. The example given is for the r8a7790 (R-Car H2).
>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
> v2
> * Correct description of example, it is for the r8a7790 (R-Car H2)
> rather than the r8a7779 (R-Car H1)
Thanks for the update!
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> @@ -43,3 +43,57 @@ Optional properties:
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> +
> +Example: R8A7790 (R-Car H2) SDHI controller nodes
> +
> + sdhi0: sd@ee100000 {
> + compatible = "renesas,sdhi-r8a7790";
> + reg = <0 0xee100000 0 0x328>;
> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
You may want to copy the example from the current r8a7790.dtsi, which
uses the newer CPG/MSSR bindings.
> + dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
> + <&dmac1 0xcd>, <&dmac1 0xce>;
> + dma-names = "tx", "rx", "tx", "rx";
> + max-frequency = <195000000>;
> + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> + status = "disabled";
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
