> -----Original Message----- > From: Simon Horman [mailto:horms@xxxxxxxxxxxx] > Sent: 10 October 2017 08:31 > To: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> > Cc: Biju Das <biju.das@xxxxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; > Mark Rutland <mark.rutland@xxxxxxx>; Yoshihiro Shimoda > <yoshihiro.shimoda.uh@xxxxxxxxxxx>; Magnus Damm > <magnus.damm@xxxxxxxxx>; Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>; > Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>; > devicetree@xxxxxxxxxxxxxxx; linux-renesas-soc@xxxxxxxxxxxxxxx > Subject: Re: [PATCH 2/4] ARM: dts: iwg20d-q7: Enable HS-USB > > On Mon, Oct 09, 2017 at 07:18:24PM +0300, Sergei Shtylyov wrote: > > Hello! > > > > On 10/09/2017 04:21 PM, Biju Das wrote: > > > > >Enable HS-USB device for the iWave G20D-Q7 carrier board based on > > >RZ/G1M. > > >Also disable the host mode support on usb otg port by default to > > >avoid pin conflicts. > > > > > >Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx> > > >Signed-off-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx> > > >--- > > > arch/arm/boot/dts/iwg20d-q7-common.dtsi | 8 +++++++- > > > 1 file changed, 7 insertions(+), 1 deletion(-) > > > > > >diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi > > >b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > > >index 1c072c0..e6b50c6 100644 > > >--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi > > >+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > > [...] > > >@@ -72,7 +78,7 @@ > > > }; > > > &pci0 { > > >-status = "okay"; > > >+status = "disabled"; > > > > I think you may just omit this prop -- you most prolly have it > > "disabloed" in the R8A7743's DT. > > Yes, I expect so too. Thanks for the comments. I will send v2 with dropping "status" property . > > > pinctrl-0 = <&usb0_pins>; > > > pinctrl-names = "default"; > > > }; > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
