Hello!
On 10/09/2017 04:21 PM, Biju Das wrote:
Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Signed-off-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 1c072c0..e6b50c6 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
[...]
@@ -72,7 +78,7 @@
};
&pci0 {
- status = "okay";
+ status = "disabled";
I think you may just omit this prop -- you most prolly have it "disabloed"
in the R8A7743's DT.
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
};
MBR, Sergei
