On Fri, Oct 06, 2017 at 06:59:51PM +0100, Fabrizio Castro wrote: > Some of the serial interfaces are exposed on the camera daughter board. > The camera daughter board can be connected to the carrier board > by means of expansion connectors 1, 2 and 3. The carrier board may host > an RZ/G1M or an RZ/G1N based SoM. > While adding support for the serial interfaces on the camera daughter > board we faced the dilemma of how to properly describe all of the > possible HW configurations and how to maximize code reuse. > The best option would be to use device tree overlays, however there is > still some work to be done on that front before actually using them, > therefore for the time being we decided to provide .dtsi files to > describe the carrier board and the camera daughter board, and provide > .dts files to describe the HW configurations we need to support. > > Best regards, > > Fabrizio Castro (2): > ARM: dts: iwg20d-q7: Rework DT architecture > ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Thanks, applied.
