Since the same carrier board may host RZ/G1M and RZ/G1N based
Systems on Module, the DT architecture for iwg20d-q7 needs
better decoupling. This patch provides:
* iwg20d-q7-common.dtsi - its purpose is to define the carrier
board definitions, and its content is basically the same
as the previous version of r8a7743-iwg20d-q7.dts, only it
has no reference to the SoM .dtsi, and that's why the
filename doesn't mention the SoC name any more.
* r8a7743-iwg20d-q7.dts - its new purpose is to put together
the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board
.dtsi defined by this very patch, along with "model" and
"compatible" properties.
The final DT architecture to describe the board is now:
r8a7743-iwg20d-q7.dts # Carrier Board + SoM
├── r8a7743-iwg20m.dtsi # SoM
│ └── r8a7743.dtsi # SoC
└── iwg20d-q7-common.dtsi # Carrier Board
and maximizes the reuse of the definitions for the carrier board
and for the SoM.
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Signed-off-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
v2:
* Reodered nodes alphabetically
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 147 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 139 +-----------------------------
2 files changed, 149 insertions(+), 137 deletions(-)
create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
new file mode 100644
index 0000000..1c072c0
--- /dev/null
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ aliases {
+ serial0 = &scif0;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ rtc@68 {
+ compatible = "ti,bq32000";
+ reg = <0x68>;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2";
+ function = "i2c2";
+ };
+
+ scif0_pins: scif0 {
+ groups = "scif0_data_d";
+ function = "scif0";
+ };
+
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1";
+ function = "usb1";
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index 0136864..6aa6b74 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -1,5 +1,5 @@
/*
- * Device Tree Source for the iWave-RZG1M Qseven carrier board
+ * Device Tree Source for the iWave-RZ/G1M Qseven board
*
* Copyright (C) 2017 Renesas Electronics Corp.
*
@@ -10,144 +10,9 @@
/dts-v1/;
#include "r8a7743-iwg20m.dtsi"
+#include "iwg20d-q7-common.dtsi"
/ {
model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
-
- aliases {
- serial0 = &scif0;
- ethernet0 = &avb;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = "serial0:115200n8";
- };
-
- vcc_sdhi1: regulator-vcc-sdhi1 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI1 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
-
- vccq_sdhi1: regulator-vccq-sdhi1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI1 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&pfc {
- i2c2_pins: i2c2 {
- groups = "i2c2";
- function = "i2c2";
- };
-
- scif0_pins: scif0 {
- groups = "scif0_data_d";
- function = "scif0";
- };
-
- avb_pins: avb {
- groups = "avb_mdio", "avb_gmii";
- function = "avb";
- };
-
- sdhi1_pins: sd1 {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <3300>;
- };
-
- sdhi1_pins_uhs: sd1_uhs {
- groups = "sdhi1_data4", "sdhi1_ctrl";
- function = "sdhi1";
- power-source = <1800>;
- };
-
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
- };
-
- usb1_pins: usb1 {
- groups = "usb1";
- function = "usb1";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&avb {
- pinctrl-0 = <&avb_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy3>;
- phy-mode = "gmii";
- renesas,no-ether-link;
- status = "okay";
-
- phy3: ethernet-phy@3 {
- reg = <3>;
- micrel,led-mode = <1>;
- };
-};
-
-&sdhi1 {
- pinctrl-0 = <&sdhi1_pins>;
- pinctrl-1 = <&sdhi1_pins_uhs>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <&vcc_sdhi1>;
- vqmmc-supply = <&vccq_sdhi1>;
- cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
- sd-uhs-sdr50;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- rtc@68 {
- compatible = "ti,bq32000";
- reg = <0x68>;
- };
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&usbphy {
- status = "okay";
};
--
2.7.4
