Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: NFSroot hangs with bad unlock balance in Linux next
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next 4/5] treewide: replace dev->trans_start update with helper
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7xx: Fix compatible string for PCF8575 chip
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: NFSroot hangs with bad unlock balance in Linux next
  • From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [Kernel] BUG: spinlock vs. mutex in SyS_finit_module / usbhs_runtime_resume / omap_tll_enable / clk_prepare_lock
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/7] ir-rx51 driver fixes
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 1/7] ir-rx51: Fix build after multiarch changes broke it
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 5/7] ARM: OMAP: dmtimer: Do not call PM runtime functions when not needed.
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 2/7] pwm: omap-dmtimer: Allow for setting dmtimer clock source
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 6/7] [media] ir-rx51: use hrtimer instead of dmtimer
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 7/7] ARM: dts: n900: enable lirc-rx51 driver
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 3/7] [media] ir-rx51: use PWM framework instead of OMAP dmtimer
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 4/7] [media] ir-rx51: add DT support to driver
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: igep00x0: Add SD card-detect.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: igep00x0: Add SD card-detect.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: igep0020: Add SD card write-protect pin.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: igep00x0: Add SD card-detect.
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: igep00x0: Add SD card-detect.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: igep0020: Add SD card write-protect pin.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] regulator: tps65917/palmas: Cleanups and bugfixes
  • From: Nishanth Menon <nm@xxxxxx>
• Applied "regulator: tps65917/palmas: Simplify multiple dereference of match->of_node" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: tps65917/palmas: Handle possible memory allocation failure" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: tps65917/palmas: Simplify multiple dereference of pdata->reg_init[idx]" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: tps65917/palmas: Simplify multiple dereference of ddata->palmas_matches[idx]" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/4] regulator: tps65917/palmas: Cleanups and bugfixes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Input: ti_am335x_tsc - Mark IRQ as wakeup capable
  • From: "R, Vignesh" <vigneshr@xxxxxx>
• Re: [PATCH V3 16/17] irqchip/gic: Prepare for adding platform driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V3 16/17] irqchip/gic: Prepare for adding platform driver
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V2] ARM: dts: am57xx-idk-common: Fix input supply names
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators
  • From: Keerthy <a0393675@xxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] Input: ti_am335x_tsc - Mark IRQ as wakeup capable
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v7 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v7 01/14] usb: hcd: Initialize hcd->flags to 0
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v7 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 0/4] regulator: tps65917/palmas: Cleanups and bugfixes
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators
  • From: Keerthy <a0393675@xxxxxx>
• Re: [PATCH] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <a0393675@xxxxxx>
• [PATCH 4/4] regulator: tps65917/palmas: Simplify multiple dereference of match->of_node
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/4] regulator: tps65917/palmas: Cleanups and bugfixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/4] regulator: tps65917/palmas: Simplify multiple dereference of pdata->reg_init[idx]
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/4] regulator: tps65917/palmas: Handle possible memory allocation failure
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/4] regulator: tps65917/palmas: Simplify multiple dereference of ddata->palmas_matches[idx]
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: am57xx-idk-common: Fix input supply names
  • From: Nishanth Menon <nm@xxxxxx>
• NFSroot hangs with bad unlock balance in Linux next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 04/10] usb: musb: Remove unnecessary shutdown function
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] ARM: dts: Fix uart wakeirq on omap5 by removing WAKEUP_EN for omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: Fix igepv5 audiopwon-gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 0/2] Fix ir-rx51 by using PWM pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM335x ICE board Linux support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH V3 02/17] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH V3 16/17] irqchip/gic: Prepare for adding platform driver
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V3 02/17] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V3 02/17] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH 4/4] Use the condition rather than a goto
  • From: Bob Mottram <bob.mottram@xxxxxxxxxxxxxxx>
• [PATCH 3/4] Inappropriate free after non-creation
  • From: Bob Mottram <bob.mottram@xxxxxxxxxxxxxxx>
• [PATCH 2/4] Simplify logic and remove redundant condition
  • From: Bob Mottram <bob.mottram@xxxxxxxxxxxxxxx>
• [PATCH 1/4] Simplify logic
  • From: Bob Mottram <bob.mottram@xxxxxxxxxxxxxxx>
• [PATCH 0/4] OMAP: DRM: some simplifications
  • From: Bob Mottram <bob.mottram@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 02/17] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH] mfd: lp873x: Add lp873x PMIC support
  • From: Manish Badarkhe <badarkhe.manish@xxxxxxxxx>
• [PATCH 0/3] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/3] Documentation: mfd/regulator: LP873X: Add information for the mfd and regulator drivers
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 3/3] regulator: lp873x: Add support for lp873x PMIC regulators
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH] mfd: lp873x: Add lp873x PMIC support
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: dra7xx: Fix compatible string for PCF8575 chip
  • From: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: disable mmc by default and enable when needed for dm814x
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Add ti,non-removable to hsmmc on hp-t410
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] non urgent auxdata fix for v4.7 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: dra7: Add gpmc dma channel
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [GIT PULL] omap legacy boot vs dt boot fixes for v4.7 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH net-next 4/5] treewide: replace dev->trans_start update with helper
  • From: Antonio Quartulli <a@xxxxxxxxxxx>
• [PATCH V3 00/17] Add support for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 01/17] irqchip/gic: Don't unnecessarily write the IRQ configuration
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 02/17] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 04/17] irqdomain: Fix handling of type settings for existing mappings
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 03/17] irqchip: Mask the non-type/sense bits when translating an IRQ
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 05/17] genirq: Look-up trigger type if not specified by caller
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 06/17] irqdomain: Don't set type when mapping an IRQ
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 07/17] genirq: Ensure IRQ descriptor is valid when setting-up the IRQ
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 09/17] irqchip/gic: Don't initialise chip if mapping IO space fails
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 08/17] genirq: Add runtime power management support for IRQ chips
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 10/17] irqchip/gic: Remove static irq_chip definition for eoimode1
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 12/17] irqchip/gic: Pass GIC pointer to save/restore functions
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 14/17] irqchip/gic: Add helper function for configuring a GIC via device-tree
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 15/17] irqchip/gic: Split GIC init in preparation for platform driver
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 16/17] irqchip/gic: Prepare for adding platform driver
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 17/17] irqchip/gic: Add platform driver for non-root GICs that require RPM
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 13/17] irqchip/gic: Don't allow early initialisation if GIC requires RPM
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• [PATCH V3 11/17] irqchip/gic: Return an error if GIC initialisation fails
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx>
• Re: core not going off
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] ARM: dts: disable mmc by default and enable when needed for dm814x
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• [PATCH] ARM: dts: Add ti,non-removable to hsmmc on hp-t410
  • From: Nicolas Chauvet <kwizart@xxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: core not going off
  • From: Ryan <ryanphilips19@xxxxxxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v7 10/14] usb: otg: add hcd companion support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: core not going off
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v7 10/14] usb: otg: add hcd companion support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next 4/5] treewide: replace dev->trans_start update with helper
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: core not going off
  • From: Ryan <ryanphilips19@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• RE: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH net-next 4/5] treewide: replace dev->trans_start update with helper
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] PCI: dra7xx: program outbound atu with correct address
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] musb_host: TX DMA cleanup after Tony's patches to the MUSB host driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Bunch of serial warnings in next at least with omap-serial
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bunch of serial warnings in next at least with omap-serial
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 5/6] HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] PCI: dra7xx: program outbound atu with correct address
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/10] Get MUSB PM runtime working again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH net v3 4/5] dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v8 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 1/9] clk: ti: am335x/am4372: Add tbclk to pwm node
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 7/9] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 8/9] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 6/9] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v8 9/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/3] HSI: omap-ssi: move omap_ssi_port_update_fclk
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/3] HSI: omap-ssi: include pinctrl header files
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/3] HSI: omap-ssi: add COMMON_CLK dependency
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 0/3] HSI: omap-ssi: regressions against yesterday's linux-next
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: (v4.4/v4.5)-stable-queue build and qemu failures (arm:allmodconfig, arm:pxa_defconfig, arm:omap2plus_defconfig)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: (v4.4/v4.5)-stable-queue build and qemu failures (arm:allmodconfig, arm:pxa_defconfig, arm:omap2plus_defconfig)
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] tty: serial: 8250_omap: do not defer termios changes
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 3/5] thermal: streamline get_trend callbacks
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] Thermal: Support for hardware-tracked trip points
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: Linux 4.2.0-rc5: am335x: musb warnings
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] crypto: omap-aes: Use dma_request_chan() for requesting DMA channel
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v2 0/3] AM57/DRA7 Clock Tree DTSI Fix-ups
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• OMAP baseline test results for v4.6-rc6
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] PCI: dra7xx: program outbound atu with correct address
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: dra7: fix clock node definition to avoid build warning
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH v2 1/3] DRA7: Fix clock data for gmac_gmii_ref_clk_div
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH v2 0/3] AM57/DRA7 Clock Tree DTSI Fix-ups
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH v2 2/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH] PCI: dra7xx: program outbound atu with correct address
  • From: Niklas Cassel <niklas.cassel@xxxxxxxx>
• [PATCH omap 3/6] arm: Additional _rcuidle tracepoints to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 1/6] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 4/6] arm: Whack another event-trace-from-idle mole
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 2/6] arm: Use more _rcuidle tracepoints to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 5/6] arm: Whack yet another event-trace-from-idle mole
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 6/6] arm: Whack an expected event-trace-from-idle mole
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• [PATCH omap 0/6] Fix OMAP uses of RCU from idle loop
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: BUG: spinlock vs. mutex in SyS_finit_module / usbhs_runtime_resume / omap_tll_enable / clk_prepare_lock
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: BUG: spinlock vs. mutex in SyS_finit_module / usbhs_runtime_resume / omap_tll_enable / clk_prepare_lock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 09/14] usb: of: add an API to get OTG device from USB controller node
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 07/14] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 10/14] usb: otg: add hcd companion support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 08/14] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 12/14] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 11/14] usb: otg: use dev_dbg() instead of VDBG()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 03/14] usb: hcd.h: Add OTG to HCD interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 05/14] usb: otg-fsm: move host controller operations into usb_otg->hcd_ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 13/14] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 14/14] usb: host: xhci-plat: Add otg device to platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 06/14] usb: gadget.h: Add OTG to gadget interface
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 04/14] usb: otg-fsm: use usb_otg wherever possible
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 02/14] usb: otg-fsm: Prevent build warning "VDBG" redefined
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 01/14] usb: hcd: Initialize hcd->flags to 0
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v7 00/14] USB OTG/dual-role framework
  • From: Roger Quadros <rogerq@xxxxxx>
• Applied "spi: davinci: Use dma_request_chan() for requesting DMA channel" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Nokia N900: Broken lirc ir-rx51 driver
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: AM335x ICE board Linux support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 2/6] HSI: omap_ssi: fix module unloading
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/6] HSI: omap_ssi_port: switch to gpiod API
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Nokia N900: Broken lirc ir-rx51 driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/6] HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/6] HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: camera application for testing (was Re: v4l subdevs without big device)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: camera application for testing (was Re: v4l subdevs without big device)
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH 6/6] HSI: omap-ssi: add clk change support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/6] HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/6] HSI: omap_ssi: fix removal of port platform device
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 00/10] Get MUSB PM runtime working again
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 0/2] Fix ir-rx51 by using PWM pdata
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• BUG: spinlock vs. mutex in SyS_finit_module / usbhs_runtime_resume / omap_tll_enable / clk_prepare_lock
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/6] omap-ssi cleanups + dvfs support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 2/6] HSI: omap_ssi: fix module unloading
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 1/6] HSI: omap_ssi_port: switch to gpiod API
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 3/6] HSI: omap_ssi: make sure probe stays available
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 5/6] HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 6/6] HSI: omap-ssi: add clk change support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 4/6] HSI: omap_ssi: fix removal of port platform device
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: camera application for testing (was Re: v4l subdevs without big device)
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: camera application for testing (was Re: v4l subdevs without big device)
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• camera application for testing (was Re: v4l subdevs without big device)
  • From: Pavel Machek <pavel@xxxxxx>
• [pre-rfc] focus and flash for Nokia N900 (was Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*)
  • From: Pavel Machek <pavel@xxxxxx>
• (v4.4/v4.5)-stable-queue build and qemu failures (arm:allmodconfig, arm:pxa_defconfig, arm:omap2plus_defconfig)
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: AM335x ICE board Linux support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] mmc: omap: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] media: omap3isp: Use dma_request_chan() to requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] crypto: omap-sham: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] crypto: omap-des: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] crypto: omap-aes: Use dma_request_chan() for requesting DMA channel
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Timer corruption when debugging
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 5/7] ASoc: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 4/7] ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 2/7] ARM: dts: omap3: Add clocks to McBSP nodes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH v3 1/7] ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 0/7] ARM/ASoC: OMAP3: Fix McBSP2/3 sidetone support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 3/7] ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 6/7] ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v3 7/7] ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pavel Machek <pavel@xxxxxx>
• Re: AM335x ICE board Linux support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH v4] serial: mctrl_gpio: add IRQ locking
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3] serial: mctrl_gpio: add IRQ locking
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• v4l subdevs without big device was Re: drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [GIT PULL 3/3] omap device tree changes for v4.7 merge window, part 2
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 2/3] omap defconfig changes for v4.7 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 1/3] omap soc changes for v4.7 merge window
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v7 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH v7 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Fix ir-rx51 by using PWM pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Fix ir-rx51 by using PWM pdata
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v7 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH v7 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 0/2] Pass n900 MMC slot names in pdata for legacy user space
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: Timer corruption when debugging
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] usb: musb: Fix idling after host mode by increasing autosuspend delay
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] usb: phy: Fix initial state for twl6030
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] usb: musb: Remove unnecessary shutdown function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] usb: musb: Remove try_idle for 2430 glue layer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] usb: musb: Fix PM runtime with delayed work
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/10] usb: musb: Remove pm_runtime_set_irq_safe
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] usb: musb: Manage USB phy from PM runtime calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] usb: musb: Split PM runtime between wrapper IP and musb core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/10] usb: musb: Fix PM runtime autosuspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/10] usb: musb: Fix PM runtime handling for connected cable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/10] Get MUSB PM runtime working again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 3/3] omap device tree changes for v4.7 merge window, part 2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] omap defconfig changes for v4.7 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] omap soc changes for v4.7 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [GIT PULL] omap fixes for v4.6-rc cycle
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [GIT PULL] omap fixes for v4.6-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Timer corruption when debugging
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Timer corruption when debugging
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH net v3 4/5] dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• [PATCH RESEND 3/4] ARM: dts: am57xx-beagle-x15: Include the commercial grade thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH RESEND 4/4] ARM: dts: am57xx-idk: Include Industrial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH RESEND 1/4] ARM: dts: am57xx: Introduce commercial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH RESEND 2/4] ARM: dts: am57xx: Introduce industrial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH RESEND 0/4] arm: dts: am57xx: Correct the thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 4/4] ARM: dts: am57xx-idk: Include Industrial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 3/4] ARM: dts: am57xx-beagle-x15: Include the commercial grade thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/4] ARM: dts: am57xx: Introduce industrial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/4] arm: dts: am57xx: Correct the thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/4] ARM: dts: am57xx: Introduce commercial grade thermal thresholds
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 7/7] mfd: wl1273-core: Use devm_mfd_add_devices() for mfd_device registration
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 6/7] mfd: tps65910: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/7] mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/7] mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/7] mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• drivers/media/i2c/adp1653.c: does not show as /dev/video* or v4l-subdev*
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Timer corruption when debugging
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Timer corruption when debugging
  • From: John Syne <john3909@xxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH net v3 5/5] drivers: net: cpsw: use of_phy_connect() in fixed-link case
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v3 4/5] dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v3 3/5] drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v3 2/5] drivers: net: cpsw: fix segfault in case of bad phy-handle
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v3 1/5] drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v3 0/5] drivers: net: cpsw: phy-handle fixes
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: 4.6-rc5 on arm (nokia n900): spinlock bad magic on CPU#0,
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v7 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/3] DRA7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] DRA7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v6 11/12] usb: core: hub: Notify OTG fsm when A device sets b_hnp_enable
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 3/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: omap_hsmmc: Check if MMC slot name is passed in pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• RE: [PATCH v6 08/12] usb: hcd: Adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• RE: [PATCH v6 08/12] usb: hcd: Adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v7 1/9] clk: ti: am335x/am4372: Add tbclk to pwm node
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 3/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] usb: dwc3: omap: get rid of dma_status
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/3] DRA7: Fix clock data for gmac_gmii_ref_clk_div
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 08/12] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 08/12] usb: hcd: Adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] serial: mctrl_gpio: add IRQ locking
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [PATCH v6 08/12] usb: hcd: Adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: [PATCH 1/2] plat-omap: dmtimer: Add support for interrupts
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] mmc: omap_hsmmc: Check if MMC slot name is passed in pdata
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2] OMAPDSS: HDMI5: Fix AVI infoframe
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] OMAPDSS: HDMI5: Change DDC timings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2 3/5] serial: mctrl_gpio: add modem control read routine
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v2 2/5] tty/serial/8250: make UART_MCR register access consistent
  • From: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] [media] ir-rx51: Fix build after multiarch changes broke it
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Fix ir-rx51 by using PWM pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] mmc: omap_hsmmc: Check if MMC slot name is passed in pdata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Pass n900 MMC slot names in pdata for legacy user space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v7 0/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 1/9] clk: ti: am335x/am4372: Add tbclk to pwm node
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 3/9] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 2/9] ARM: dts: am437x: Add missing compatibles to PWM binding documents
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 7/9] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 5/9] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 8/9] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 9/9] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v7 6/9] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH 0/3] AM57/DRA7 Clock Tree DTSI Fix-ups
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Applied "regulator: tps65917/palmas: Add bypass "On" value" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] Add additional OnRISC Baltos devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] AM57/DRA7 Clock Tree DTSI Fix-ups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• [PATCH 1/3] DRA7: Fix clock data for gmac_gmii_ref_clk_div
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH 0/3] AM57/DRA7 Clock Tree DTSI Fix-ups
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH 3/3] ARM: DRA7x: dts: Update the OSC_32K_CLK frequency
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: DM3730 sprz319 erratum 2.1
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] DT Fixes for OMAP4 and OMAP5 boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] ARM: dts: twl6030: describe gpadc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] ARM: dts: omap5: fix range of permitted wakeup pinmux registers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix ISP syscon register offset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7xx: Fix compatible string for PCF8575 chip
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP Mailbox legacy platform device support removal
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] ARM: dts: AM57xx/DRA7: Update SoC voltage rail limits to match data sheet
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] ARM: dts: AM57xx/DRA7: Update SoC voltage rail limits to match data sheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: omap5-board-common: fix ldo1_reg and ldo4_reg ranges
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Fix regulator API abuse in dss.c and hdmi4.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] omapfb: Fix regulator API abuse in dss.c and hdmi4.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] plat-omap: dmtimer: Add support for interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Fix regulator API abuse in dss.c and hdmi4.c
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] regulator: tps65917/palmas: Add bypass "On" value
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omapfb: Fix regulator API abuse in dss.c and hdmi4.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: DM3730 sprz319 erratum 2.1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: pinctrl-single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Liviu Dudau <liviu.dudau@xxxxxxx>
• Re: UART idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] rtc: omap: Support ext_wakeup configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v1] ARM: clocksource: make ARM_GLOBAL_TIMER selectable
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net v2 1/3] drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• Re: AM335x ICE board Linux support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] DT Fixes for OMAP4 and OMAP5 boards
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] gpio: omap: fix irq triggering in smart-idle wakeup mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ASoC: omap-pcm: Initialize DMA configuration
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: "Franklin S Cooper Jr." <fcooper@xxxxxx>
• [PATCH 1/3] ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 3/3] ARM: dts: add DTS for Baltos IR2110
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 2/3] ARM: dts: add DTS for Baltos IR3220
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH 0/3] Add additional OnRISC Baltos devices
  • From: yegorslists@xxxxxxxxxxxxxx
• Re: + maintainers-fix-rajendra-nayaks-address.patch added to -mm tree
  • From: Afzal Mohammed <afzal.mohd.ma@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: AM335x ICE board Linux support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] rtc: omap: Support ext_wakeup configuration
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• RE: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2 2/2] phy: Group vendor specific phy drivers
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• RE: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH 0/4] OMAP Mailbox legacy platform device support removal
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• RE: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
  • From: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH net v2 1/3] drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: USB gadgets with configfs hang reboot
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Applied "spi: return error if kmap'd buffers passed to spi_map_buf()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix driver path in file comment
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH] ASoC: omap-pcm: Initialize DMA configuration
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: twl6040: Check clk_prepare_enable() return value in twl6040_power()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: twl6040: Disable and unprepare clk32k in twl6040_power() error path
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: 4.6-rc5 on arm (nokia n900): spinlock bad magic on CPU#0,
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Eric Engestrom <eric.engestrom@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH] mfd: twl4030-power: Fix driver path in file comment
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v6 09/12] usb: gadget: udc: adapt to OTG core
  • From: Roger Quadros <rogerq@xxxxxx>
• RE: [PATCH 1/2] plat-omap: dmtimer: Add support for interrupts
  • From: Andrei Varvara <Andrei.Varvara@xxxxxxxx>
• Re: [PATCH] MAINTAINERS: remove Rajendra Nayak
  • From: Afzal Mohammed <afzal.mohd.ma@xxxxxxxxx>
• Re: [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Eric Engestrom <eric.engestrom@xxxxxxxxxx>
• [PATCH] ARM: dts: dra7xx: Fix compatible string for PCF8575 chip
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 5/7] mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• AM335x ICE board Linux support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• 4.6-rc5 on arm (nokia n900): spinlock bad magic on CPU#0,
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Sylvain Lemieux <slemieux.tyco@xxxxxxxxx>
• Re: [PATCH 3/7] mfd: max77686: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH 1/5] mfd: tps65217: Add support for IRQs
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Eric Engestrom <eric.engestrom@xxxxxxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] spi: Add DMA support for ti-qspi
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 1/3] spi: return error if kmap'd buffers passed to spi_map_buf()
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 2/3] spi: Add DMA support for spi_flash_read()
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 3/3] spi: spi-ti-qspi: Add DMA support for QSPI mmap read
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 4/4] ARM: remove duplicate const qualifier
  • From: Eric Engestrom <eric.engestrom@xxxxxxxxxx>
• OMAP baseline test results for v4.6-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/4] Thermal: Support for hardware-tracked trip points
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• [PATCH 3/4] thermal: streamline get_trend callbacks
  • From: Caesar Wang <wxt@xxxxxxxxxxxxxx>
• Re: [GIT PULL] omap device tree changes for v4.7 merge window, part 1
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c/omap: drop the lock hard irq context
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: net: add entry for TI Ethernet Switch drivers
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] regulator: twl: Make sure we have access to powerbus before trying to write to it
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH 3/3] regulator: twl: Regulator mode should not depend on regulator enabled state
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] regulator: twl: Regulator mode should not depend on regulator enabled state
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] regulator: twl: Make sure we have access to powerbus before trying to write to it
  • From: Pavel Machek <pavel@xxxxxx>
• UART idle
  • From: Ryan <ryanphilips19@xxxxxxxxxxxxxx>
• Re: [PATCH v1] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode
  • From: Pavel Machek <pavel@xxxxxx>
• Re: qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• qemu:beagle no longer booting with omap2plus_defconfig in -next
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] pinctrl: pinctrl-single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] omap fixes for v4.6-rc cycle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• [GIT PULL] omap device tree changes for v4.7 merge window, part 1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: OMAP3: Fix McBSP2/3 hwmod setup for sidetone
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Nokia N900: Broken lirc ir-rx51 driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] ARM: OMAP2+: first set of hwmod changes for v4.7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH v6 1/7] clk: ti: am335x/am4372: Add tbclk to pwm node
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 0/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 2/7] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 3/7] ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 5/7] ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 4/7] pwms: pwm-ti*: Get the clock from the PWMSS parent when using old bindings
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 7/7] ARM: dts: DRA7: Add dt nodes for PWMSS
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v6 6/7] ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• Re: [GIT PULL] omap fixes against v4.6-rc2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: Nokia N900: Broken lirc ir-rx51 driver
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• RE: [PATCH net v2 0/3] drivers: net: cpsw: phy-handle fixes
  • From: Andrew Goodbody <andrew.goodbody@xxxxxxxxxxxxxx>
• Re: [PATCH net v2 3/3] drivers: net: cpsw: use of_phy_connect() in fixed-link case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix ISP syscon register offset
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: OMAP3: Fix McBSP2/3 hwmod setup for sidetone
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH net v2 1/3] drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH V2 4/9] cpufreq: omap: Use generic platdev driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH V2 14/14] irqchip/gic: Add support for tegra AGIC interrupt controller
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH V2 14/14] irqchip/gic: Add support for tegra AGIC interrupt controller
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V2 13/14] dt-bindings: arm-gic: Add documentation for Tegra210 AGIC
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V2 06/14] irqdomain: Don't set type when mapping an IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH 00/12] mtd: get rid of of_mtd.{c,h} and of_get_nand_xx()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] mtd: nand: omap2: Fix SDMA support for NAND DMA prefetch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH V2 02/14] irqchip/gic: WARN if setting the interrupt type for a PPI fails
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V2 06/14] irqdomain: Don't set type when mapping an IRQ
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH V2 03/14] irqchip: Mask the non-type/sense bits when translating an IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V2 06/14] irqdomain: Don't set type when mapping an IRQ
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: [PATCH V2 04/14] irqdomain: Fix handling of type settings for existing mappings
  • From: Marc Zyngier <marc.zyngier@xxxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH net v2 0/3] drivers: net: cpsw: phy-handle fixes
  • From: Mugunthan V N <mugunthanvnm@xxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• RE: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: Fix ISP syscon register offset
  • From: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH 0/3] cpufreq: logging consistency changes
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: "Kim, Milo" <milo.kim@xxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH net v2 3/3] drivers: net: cpsw: use of_phy_connect() in fixed-link case
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• Re: [PATCH] drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH net v2 2/3] drivers: net: cpsw: fix error messages when using phy-handle DT property
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v2 1/3] drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH net v2 0/3] drivers: net: cpsw: phy-handle fixes
  • From: "David Rivshin (Allworx)" <drivshin.allworx@xxxxxxxxx>
• [PATCH v2] OMAPDSS: HDMI5: Fix AVI infoframe
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• [PATCH v2] OMAPDSS: HDMI5: Change DDC timings
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH] OMAPDSS: HDMI5: Change DDC timings
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH V2 06/14] irqdomain: Don't set type when mapping an IRQ
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH] OMAPDSS: HDMI5: Fix AVI infoframe
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: [PATCH] OMAPDSS: HDMI5: Fix AVI infoframe
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] OMAPDSS: HDMI5: Change DDC timings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] MAINTAINERS: net: add entry for TI Ethernet Switch drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAPDSS: HDMI5: Fix AVI infoframe
  • From: "J.D. Schroeder" <Linux.HWI@xxxxxxxxxx>
• Re: Nokia N900 retention mode in v4.6, camera buttons fun
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• [PATCH 0/7] mfd: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 1/7] mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 2/7] mfd: lp8788: Use devm_mfd_add_devices and devm_regmap_add_irq_chip
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>