Re: [PATCH 2/8] ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18-05-16, 18:36, Dave Gerlach wrote:
> +	cpu0_opp_table: opp_table0 {
> +		compatible = "operating-points-v2";
> +
> +		/*
> +		 * The three following nodes are marked with opp-suspend
> +		 * because the can not be enabled simultaneously on a
> +		 * single SoC.
> +		 */
> +		opp50@300000000 {
> +			opp-hz = /bits/ 64 <300000000>;
> +			opp-microvolt = <950000 931000 969000>;
> +			opp-supported-hw = <0x06 0x0010>;

Is there any place in either of the patchsets you have sent, that details the
usage of the above two values? I mean which defines, what is 0x6 and what is
0x1 ?

-- 
viresh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux