On 10/05/16 13:03, Felipe Balbi wrote:
>
> Hi,
>
> Roger Quadros <rogerq@xxxxxx> writes:
>> Implementations might use different IRQs for
>> host, gadget and OTG so use named interrupt resources
>> to allow Device tree to specify the 3 interrupts.
>>
>> Following are the interrupt names
>>
>> Peripheral Interrupt - peripheral
>> HOST Interrupt - host
>> OTG Interrupt - otg
>>
>> We still maintain backward compatibility for a single named
>> interrupt for all 3 interrupts (e.g. for dwc3-pci) and
>> single unnamed interrupt for all 3 interrupts (e.g. old DT).
>
> cool :-)
>
>> @@ -748,6 +750,20 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>> }
>> break;
>> case USB_DR_MODE_OTG:
>> + dwc->otg_irq = platform_get_irq_byname(dwc3_pdev, "otg");
>> + if (dwc->otg_irq <= 0) {
>> + dwc->otg_irq = platform_get_irq_byname(dwc3_pdev,
>> + "dwc_usb3");
>> + if (dwc->otg_irq <= 0) {
>> + res = platform_get_resource(dwc3_pdev,
>> + IORESOURCE_IRQ, 0);
>> + if (!res) {
>> + dev_err(dwc->dev, "missing otg IRQ\n");
>> + return -ENODEV;
>> + }
>> + dwc->otg_irq = res->start;
>> + }
>> + }
>
> I suppose this part can be removed and added only when OTG is
> supported. Then dwc3_otg_init() (or whatever) can do this.
Sure.
>
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 186a886..2e20892 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -716,6 +716,8 @@ struct dwc3_scratchpad_array {
>> * @maximum_speed: maximum speed requested (mainly for testing purposes)
>> * @revision: revision register contents
>> * @dr_mode: requested mode of operation
>> + * @gadget_irq: IRQ number for Peripheral IRQs
>> + * @otg_irq: IRQ number for OTG IRQs
>> * @usb2_phy: pointer to USB2 PHY
>> * @usb3_phy: pointer to USB3 PHY
>> * @usb2_generic_phy: pointer to USB2 PHY
>> @@ -817,6 +819,9 @@ struct dwc3 {
>>
>> enum usb_dr_mode dr_mode;
>>
>> + int gadget_irq;
>> + int otg_irq;
>
> while at that, let's add host_irq too and do proper changes to dwc3/host.c
Sure. So we add host_irq here, and manually create an irq resource
in dwc3_host_init?
>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index c3b0d01..8db8d13 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -1605,7 +1605,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>> int irq;
>> u32 reg;
>>
>> - irq = platform_get_irq(to_platform_device(dwc->dev), 0);
>> + irq = dwc->gadget_irq;
>> ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
>> IRQF_SHARED, "dwc3", dwc->ev_buf);
>> if (ret) {
>> @@ -2781,6 +2781,23 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
>> int dwc3_gadget_init(struct dwc3 *dwc)
>> {
>> int ret;
>> + struct resource *res;
>> + struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
>> +
>> + dwc->gadget_irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
>> + if (dwc->gadget_irq <= 0) {
>> + dwc->gadget_irq = platform_get_irq_byname(dwc3_pdev,
>> + "dwc_usb3");
>> + if (dwc->gadget_irq <= 0) {
>> + res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
>> + 0);
>> + if (!res) {
>> + dev_err(dwc->dev, "missing peripheral IRQ\n");
>> + return -ENODEV;
>> + }
>> + dwc->gadget_irq = res->start;
>> + }
>> + }
>>
>> dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
>> &dwc->ctrl_req_addr, GFP_KERNEL);
>
> you're regressing dwc3_gadget_stop().
>
ah, good catch.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
