Re: [PATCH v7 5/5] usb: dwc3: core: cleanup IRQ resources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Roger Quadros <rogerq@xxxxxx> writes:
> Implementations might use different IRQs for
> host, gadget and OTG so use named interrupt resources
> to allow Device tree to specify the 3 interrupts.
>
> Following are the interrupt names
>
> Peripheral Interrupt - peripheral
> HOST Interrupt - host
> OTG Interrupt - otg
>
> We still maintain backward compatibility for a single named
> interrupt for all 3 interrupts (e.g. for dwc3-pci) and
> single unnamed interrupt for all 3 interrupts (e.g. old DT).

cool :-)

> @@ -748,6 +750,20 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>  		}
>  		break;
>  	case USB_DR_MODE_OTG:
> +		dwc->otg_irq = platform_get_irq_byname(dwc3_pdev, "otg");
> +		if (dwc->otg_irq <= 0) {
> +			dwc->otg_irq = platform_get_irq_byname(dwc3_pdev,
> +							       "dwc_usb3");
> +			if (dwc->otg_irq <= 0) {
> +				res = platform_get_resource(dwc3_pdev,
> +							    IORESOURCE_IRQ, 0);
> +				if (!res) {
> +					dev_err(dwc->dev, "missing otg IRQ\n");
> +					return -ENODEV;
> +				}
> +				dwc->otg_irq = res->start;
> +			}
> +		}

I suppose this part can be removed and added only when OTG is
supported. Then dwc3_otg_init() (or whatever) can do this.

> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 186a886..2e20892 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -716,6 +716,8 @@ struct dwc3_scratchpad_array {
>   * @maximum_speed: maximum speed requested (mainly for testing purposes)
>   * @revision: revision register contents
>   * @dr_mode: requested mode of operation
> + * @gadget_irq: IRQ number for Peripheral IRQs
> + * @otg_irq: IRQ number for OTG IRQs
>   * @usb2_phy: pointer to USB2 PHY
>   * @usb3_phy: pointer to USB3 PHY
>   * @usb2_generic_phy: pointer to USB2 PHY
> @@ -817,6 +819,9 @@ struct dwc3 {
>  
>  	enum usb_dr_mode	dr_mode;
>  
> +	int			gadget_irq;
> +	int			otg_irq;

while at that, let's add host_irq too and do proper changes to dwc3/host.c

> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index c3b0d01..8db8d13 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -1605,7 +1605,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
>  	int			irq;
>  	u32			reg;
>  
> -	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
> +	irq = dwc->gadget_irq;
>  	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
>  			IRQF_SHARED, "dwc3", dwc->ev_buf);
>  	if (ret) {
> @@ -2781,6 +2781,23 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
>  int dwc3_gadget_init(struct dwc3 *dwc)
>  {
>  	int					ret;
> +	struct resource *res;
> +	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
> +
> +	dwc->gadget_irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
> +	if (dwc->gadget_irq <= 0) {
> +		dwc->gadget_irq = platform_get_irq_byname(dwc3_pdev,
> +							  "dwc_usb3");
> +		if (dwc->gadget_irq <= 0) {
> +			res = platform_get_resource(dwc3_pdev, IORESOURCE_IRQ,
> +						    0);
> +			if (!res) {
> +				dev_err(dwc->dev, "missing peripheral IRQ\n");
> +				return -ENODEV;
> +			}
> +			dwc->gadget_irq = res->start;
> +		}
> +	}
>  
>  	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
>  			&dwc->ctrl_req_addr, GFP_KERNEL);

you're regressing dwc3_gadget_stop().

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux