On 05/09/16 15:32, Peter Ujfalusi wrote: > On 05/09/16 15:10, Peter Ujfalusi wrote: > >>>> finally I found some time to apply your patches. Sorry for the long time. >>>> >>>> Unfortunately, it does not work. Neither on omap5evm nor on our omap5 hardware. >>>> I get no sound on the twl6040 - just white noise (which can be controlled in >>>> level through >>>> amixer so it is created on the digital input side of the twl6040). >>>> >>>> So I think your patch is missing a detail compared to my simple solution. >>> >>> Did you implement anything on the audio driver side? The audio driver must >>> enable the clock implemented by this patch. >> >> I did, can test it in 10 minutes or so... > > might work, but linux-next is not booting on omap5-uevm :o I don't know why... Applying Tero's alone makes the board not to boot, so something there... I can not see anything even with low-level debugging enabled :( I can not debug it further today, will look at this tomorrow. > In any case I have attached the 3 patches I have for this, including Tero's > ported to linux-next. > > Patch 3 might need to be done per board probably, but this should be good for > testing. > > > > _______________________________________________ > Kernel mailing list > Kernel@xxxxxxxxxxxxxxxxx > http://pyra-handheld.com/cgi-bin/mailman/listinfo/kernel > -- Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
