By the way, is it ok that function musb_rx_dma_iso_cppi41 uses
hw_ep->tx_channel? I would suppose that it should use rx_channel
instead.
2016-05-20 23:58 GMT+03:00 Matwey V. Kornilov <matwey@xxxxxxxxxx>:
> (gdb) frame 3
> #3 musb_host_rx (musb=0xdb3e0010, epnum=<optimized out>) at
> ../drivers/usb/musb/musb_host.c:1969
> 1969 done =
> musb_rx_dma_inventra_cppi41(c, hw_ep, qh, urb, xfer_len);
> (gdb) info locals
> hw_ep = 0xdb3e0f48
> c = <optimized out>
> epio = <optimized out>
> qh = 0xd9cb2000
> xfer_len = <optimized out>
> mbase = <optimized out>
> iso_err = <optimized out>
> done = <optimized out>
> status = <optimized out>
> dma = <optimized out>
> __func__ = <error reading variable __func__ (Cannot access memory at
> address 0x3e8)>
> (gdb) print hw_ep
> $21 = (struct musb_hw_ep *) 0xdb3e0f48
> (gdb) print *hw_ep
> $22 = {musb = 0xdb3e0010, fifo = 0xe0bf6c58, regs = 0xe0bf6c10, epnum
> = 14 '\016', is_shared_fifo = true, tx_double_buffered = false,
> rx_double_buffered = false, max_packet_sz_tx = 1024,
> max_packet_sz_rx = 1024, tx_channel = 0x0, rx_channel = 0xd914c3bc,
> in_qh = 0xd9cb2000, out_qh = 0xd9cb2000, rx_reinit = 0 '\000',
> tx_reinit = 1 '\001', ep_in = {end_point = {driver_data = 0x0,
> name = 0x0, ops = 0x0, ep_list = {next = 0x0, prev = 0x0}, caps
> = {type_control = 0, type_iso = 0, type_bulk = 0, type_int = 0,
> dir_in = 0, dir_out = 0}, claimed = false, enabled = false,
> maxpacket = 0, maxpacket_limit = 0, max_streams = 0, mult = 0,
> maxburst = 0, address = 0 '\000', desc = 0x0, comp_desc = 0x0},
> name = '\000' <repeats 11 times>, hw_ep = 0x0, musb = 0x0,
> current_epnum = 0 '\000', type = 0 '\000', is_in = 0 '\000',
> packet_sz = 0, desc = 0x0, dma = 0x0, req_list = {next = 0x0,
> prev = 0x0}, wedged = 0 '\000', busy = 0 '\000', hb_mult = 0
> '\000'}, ep_out = {end_point = {driver_data = 0x0, name = 0x0,
> ops = 0x0, ep_list = {next = 0x0, prev = 0x0}, caps =
> {type_control = 0, type_iso = 0, type_bulk = 0, type_int = 0, dir_in =
> 0,
> dir_out = 0}, claimed = false, enabled = false, maxpacket = 0,
> maxpacket_limit = 0, max_streams = 0, mult = 0, maxburst = 0,
> address = 0 '\000', desc = 0x0, comp_desc = 0x0}, name = '\000'
> <repeats 11 times>, hw_ep = 0x0, musb = 0x0,
> current_epnum = 0 '\000', type = 0 '\000', is_in = 0 '\000',
> packet_sz = 0, desc = 0x0, dma = 0x0, req_list = {next = 0x0,
> prev = 0x0}, wedged = 0 '\000', busy = 0 '\000', hb_mult = 0 '\000'}}
>
> 2016-05-20 23:55 GMT+03:00 Matwey V. Kornilov <matwey@xxxxxxxxxx>:
>> I used kgdb. Is it ok?
>> channel appeared to be 0x0:
>>
>> (gdb) continue
>> Continuing.
>> [Switching to Thread 315]
>>
>> Breakpoint 1, cppi41_dma_channel_program (channel=0x0, packet_sz=960,
>> mode=0 '\000', dma_addr=2609136576, len=960)
>> at ../drivers/usb/musb/musb_cppi41.c:481
>> 481 {
>> (gdb) bt
>> #0 cppi41_dma_channel_program (channel=0x0, packet_sz=960, mode=0
>> '\000', dma_addr=2609136576, len=960)
>> at ../drivers/usb/musb/musb_cppi41.c:481
>> #1 0xbf251570 in musb_rx_dma_iso_cppi41 (len=<optimized out>,
>> urb=<optimized out>, qh=<optimized out>, hw_ep=<optimized out>,
>> dma=<optimized out>) at ../drivers/usb/musb/musb_host.c:1569
>> #2 musb_rx_dma_inventra_cppi41 (len=<optimized out>, urb=<optimized
>> out>, qh=<optimized out>, hw_ep=<optimized out>,
>> dma=<optimized out>) at ../drivers/usb/musb/musb_host.c:1652
>> #3 musb_host_rx (musb=0xdb3e0010, epnum=<optimized out>) at
>> ../drivers/usb/musb/musb_host.c:1969
>> #4 0xbf249fb4 in musb_dma_completion (musb=<optimized out>,
>> epnum=<optimized out>, transmit=<optimized out>)
>> at ../drivers/usb/musb/musb_core.c:1693
>> #5 0xbf258b10 in cppi41_trans_done (cppi41_channel=0xd914c3bc) at
>> ../drivers/usb/musb/musb_cppi41.c:148
>> #6 0xbf258c1c in cppi41_dma_callback (private_data=<optimized out>)
>> at ../drivers/usb/musb/musb_cppi41.c:286
>> #7 0xbf229f38 in ?? ()
>> Backtrace stopped: previous frame identical to this frame (corrupt stack?)
>>
>>
>> 2016-05-20 23:10 GMT+03:00 Bin Liu <b-liu@xxxxxx>:
>>> Hi,
>>>
>>> On Fri, May 20, 2016 at 04:32:06PM +0300, Matwey V. Kornilov wrote:
>>>> 2016-05-20 16:19 GMT+03:00 <matwey@xxxxxxxxxx>:
>>>> > Hello,
>>>> >
>>>> > I am running 4.6-rc3 on BealgeBone Black and when I try to interract
>>>> > with pwc webcam attached to usb port the following kernel panic
>>>> > happening.
>>>>
>>>> Please note, that the same is happening with 4.6.0 release.
>>>
>>> Please apply the following patch and reproduce the oops, I'd like to
>>> check if the oops is caused by NULL of hw_ep->in_qh.
>>>
>>> Regards,
>>> -Bin.
>>>
>>> ---8<-------
>>> diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
>>> index e499b86..3492c6e 100644
>>> --- a/drivers/usb/musb/musb_cppi41.c
>>> +++ b/drivers/usb/musb/musb_cppi41.c
>>> @@ -489,8 +489,11 @@ static int cppi41_dma_channel_program(struct dma_channel *channel,
>>> if (is_host_active(cppi41_channel->controller->musb)) {
>>> if (cppi41_channel->is_tx)
>>> hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult;
>>> - else
>>> + else {
>>> + if (!cppi41_channel->hw_ep->in_qh)
>>> + dev_err(NULL, "->in_qh is NULL\n");
>>> hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult;
>>> + }
>>> }
>>>
>>> channel->status = MUSB_DMA_STATUS_BUSY;
>>>
>>
>>
>>
>> --
>> With best regards,
>> Matwey V. Kornilov.
>> Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
>> 119991, Moscow, Universitetsky pr-k 13, +7 (495) 9392382
>
>
>
> --
> With best regards,
> Matwey V. Kornilov.
> Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
> 119991, Moscow, Universitetsky pr-k 13, +7 (495) 9392382
--
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119991, Moscow, Universitetsky pr-k 13, +7 (495) 9392382
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
