Signed-off-by: Andrea Gelmini <andrea.gelmini@xxxxxxxxx> --- arch/arm/mach-omap2/sdrc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 645a2a4..f115006 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); * don't adjust it down as your clock period increases the refresh interval * will not be met. Setting all parameters for complete worst case may work, * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists across production samples. * * Only the FULL speed values are given. Current code is such that rate * changes must be made at DPLLoutx2. The actual value adjustment for low -- 2.8.2.534.g1f66975 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
