* Sebastian Reichel <sre@xxxxxxxxxx> [160429 19:11]: > Merge omap_ssi and omap_ssi_port into one module. This > fixes problems with module cycle dependencies introduced > by future patches. Can you please check against the hardware for the split? For reference, below is what I dumped out from dm3730 for the modules on the L4 interconnect: 0x48000000 + 0x40000 + 0x18000 = 0x48058000, size 0x1000, parent with sysc 0x48000000 + 0x40000 + 0x19000 = 0x48059000, size 0x1000, gdd 0x48000000 + 0x40000 + 0x1a000 = 0x4805a000, size 0x1000, ssi_port1 0x48000000 + 0x40000 + 0x1b000 = 0x4805b000, size 0x1000, ssi_port2 0x48000000 + 0x40000 + 0x1c000 = 0x4805c000, size 0x1000, target agent So the parent target module at 0x48058000 controls everything with the sysc register. The gdd, ssi_port1 and ssi_port2 are children of the parent target module at 0x48058000 and should not have any sysc related registers. Can you please check if gdd, ssi_port1 and ssi_port2 have any sysc related registers too? :) If they do, then they too can idle on their own but most likely still depend on the parent module. The target agent above is a separate module with the interconnect related registers, no need to do anything with that AFAIK. I believe this is the same for 34xx too but have not dumped it out of the hardware. I can do that if the above does not match what you're seeing. If we want to have separate driver modules, you can do this: 1. Have the parent target module at 0x4805800 do PM runtime calls, they then propagate to the hwmod code properly for the ti,hwmods = "ssi" entry. This module can be minimal, and can also have child devices within it's first 0x1000 sized range if needed. 2. Have the parent target module probe the child device drivers as needed with of_platform_populate() at the end of it's probe. The children can't be pm_runtime_irq_safe as it permanently blocks the idling of the parent. 3. Have the the parent target module at 0x4805800 implement PM runtime for it's children by registering struct dev_pm_ops for them. If you really want to have them all as a single module then that should work too as long as there's only one set of sysc related registers. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
