* Bin Liu <b-liu@xxxxxx> [160517 14:17]: > Hi Tony, > > On Wed, May 11, 2016 at 05:53:01PM -0700, Tony Lindgren wrote: > > Hi all, > > > > Here's the whole series reposted with a bunch of additional changes. > > It seems to now properly work with with multiple phy cable status > > events, and should work for Ivaylo on n900 too. > > > > Please re-review and re-test. > > While trying to test this patch set, I just found that commit 56f487c (PM > / Runtime: Update last_busy in rpm_resume) breaks dsps glue (TI am335x > device). Do you have an am335x board with has otg port on it to take a > look at this problem? The only board I know of which has an otg port is > TI am335x GP evm. Hmm sure I can take a lok. Chances are that just doing a change for s/pm_runtime_put/pm_runtime_put_sync/ will fix it. I'm wondering why it breaks though as dsps glue does not use autosuspend? It could also be a case where the parent and child PM runtime use counts get out of sync? BTW, I did give my series a quick try here on j5eco-evm and that behaved for peripheral and host enumeration. It's pretty much the same setup as on am335x I believe. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
