Re: [PATCH v4 2/4] serial: mctrl_gpio: add modem control read routine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Yegor,

On Mon, May 23, 2016 at 09:30:56AM +0200, yegorslists@xxxxxxxxxxxxxx wrote:
> From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
> 
> mctrl_gpio_get_outputs() returns the state of following signals:
> 
> RTS, DTR
> 
> Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
> ---
>  drivers/tty/serial/serial_mctrl_gpio.c | 18 ++++++++++++++++++
>  drivers/tty/serial/serial_mctrl_gpio.h | 15 ++++++++++++++-
>  2 files changed, 32 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
> index e8dd509..a868595 100644
> --- a/drivers/tty/serial/serial_mctrl_gpio.c
> +++ b/drivers/tty/serial/serial_mctrl_gpio.c
> @@ -86,6 +86,24 @@ unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
>  }
>  EXPORT_SYMBOL_GPL(mctrl_gpio_get);
>  
> +unsigned int
> +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl)
> +{
> +	enum mctrl_gpio_idx i;
> +
> +	for (i = 0; i < UART_GPIO_MAX; i++) {
> +		if (gpios->gpio[i] && mctrl_gpios_desc[i].dir_out) {
> +			if (gpiod_get_value(gpios->gpio[i]))
> +				*mctrl |= mctrl_gpios_desc[i].mctrl;
> +			else
> +				*mctrl &= ~mctrl_gpios_desc[i].mctrl;

Given that get_value for outputs isn't well defined I'd prefer if there
were no usecase for this. This is intended for probe-time, right?
Otherwise the state of these lines should be known.

> +		}
> +	}
> +
> +	return *mctrl;
> +}
> +EXPORT_SYMBOL_GPL(mctrl_gpio_get_outputs);
> +
>  struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
>  {
>  	struct mctrl_gpios *gpios;
> diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
> index 332a33a..fa000bc 100644
> --- a/drivers/tty/serial/serial_mctrl_gpio.h
> +++ b/drivers/tty/serial/serial_mctrl_gpio.h
> @@ -48,12 +48,19 @@ struct mctrl_gpios;
>  void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl);
>  
>  /*
> - * Get state of the modem control output lines from GPIOs.
> + * Get state of the modem control input lines from GPIOs.

This looks right, should be a separate patch or mentioned in the commit
log.

> +unsigned int
> +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl);

Personally I'd prefer the following formatting:

	unsigned int mctrl_gpio_get_outputs(struct mctrl_gpios *gpios,
					    unsigned int *mctrl)

I didn't check though which of these two is more consistent in that
file.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux