* Peter Ujfalusi <peter.ujfalusi@xxxxxx> [160509 01:36]: > On 05/05/16 21:56, Tony Lindgren wrote: > > Playing audio works on omap5-uevm, but produces an "Unhandled fault: > > imprecise external abort (0x1406) at 0x00000000" error on igepv5. > > > > Looks like the twl6040 audpwron GPIO pin is different for these > > boards. Let's fix the issue by configuring the audpwron in the > > board specific dts file. > > > > Cc: Agustí Fontquerni <af@xxxxxxxxxxx> > > Cc: Eduard Gavin <egavin@xxxxxxxxxxx> > > Cc: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx> > > Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > > --- > > arch/arm/boot/dts/omap5-board-common.dtsi | 3 ++- > > arch/arm/boot/dts/omap5-igep0050.dts | 10 ++++++++++ > > arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++ > > 3 files changed, 22 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi > > index 2eea26c..23b1d7c 100644 > > --- a/arch/arm/boot/dts/omap5-board-common.dtsi > > +++ b/arch/arm/boot/dts/omap5-board-common.dtsi > > @@ -642,7 +642,8 @@ > > pinctrl-0 = <&twl6040_pins>; > > > > interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ > > - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ > > + > > + /* audpwron gpio defined in the board specific dts */ > > > > vio-supply = <&smps7_reg>; > > v2v1-supply = <&smps9_reg>; > > diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts > > index 72ff6a4..673cdfa 100644 > > --- a/arch/arm/boot/dts/omap5-igep0050.dts > > +++ b/arch/arm/boot/dts/omap5-igep0050.dts > > @@ -58,3 +58,13 @@ > > <&gpio7 3 0>; /* 195, SDA */ > > }; > > > > +&twl6040 { > > + ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */ > > BTW: how do you know that gpio144 is used as audpwron GPIO on igepv5? >From looking at the ISEE git tree. But it would be best for the ISEE guys to review the patch. > > +}; > > + > > +&twl6040_pins { > > + pinctrl-single,pins = < > > + OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */ > > + OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ > > What does the gpio145 is used for? No idea without seeing the schematics, also from ISEE git tree so should be reviewed. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html