Re: [PATCH v2 1/3] Documentation: mfd: LP873X: Add information for the mfd and regulator drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Thursday 12 May 2016 06:51 PM, Lee Jones wrote:
On Tue, 10 May 2016, Keerthy wrote:

Add information for the mfd and regulator drivers.

Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
  Documentation/devicetree/bindings/mfd/lp873x.txt | 55 ++++++++++++++++++++++++
  1 file changed, 55 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..3ef5ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,55 @@
+TI LP3943 MFD driver
+
+Required properties:
+  - compatible: "ti,lp8732", "ti,lp8733"
+  - reg: I2C slave address.
+
+For the lp873x regulator properties please refer to:
+Documentation/devicetree/bindings/regulator/lp873x.txt

This is a Linuxism.  Use ../bindings/.. instead.

Okay.


+Example:
+
+lp8733: lp8733@60 {

lp8733 is not a device 'type'.  What does it do?

Looks like a 'pmic' to me.

+	compatible = "ti,lp8733";
+	reg = <0x60>;
+
+	regulators {
+		lp8733_buck0: buck0 {
+			regulator-name = "lp8733-buck0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lp8733_buck1: buck1 {
+			regulator-name = "lp8733-buck1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-min-microamp = <1500000>;
+			regulator-max-microamp = <4000000>;
+			regulator-ramp-delay = <10000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo0: ldo0 {
+			regulator-name = "lp8733-ldo0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		lp8733_ldo1: ldo1 {
+			regulator-name = "lp8733-ldo1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};

I'm failing to see how this is an MFD?

As of now, only regulators part is supported, there are Configurable General Purpose Output Signals (GPO), Over-Temperature Warning and Protection apart from regulators.


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux