[PATCH v8 3/5] usb: dwc3: omap: Don't set POWERPRESENT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



TRM [1] recommends that POWERPRESENT bit must not be
set and left at it's default value of 0.

[1] OMAP542x TRM - http://www.ti.com/lit/pdf/swpu249
Section 23.11.4.5.1 Mailbox VBUS/ID Management

"Because PIPE powerpresent has a different meaning in host and in device mode,
and because of the redundancy with the UTMI signals, the controller ORes
together the appropriate PIPE and UTMI inputs to create its internal
VBUS status. For that reason, it is recommended to leave field
USBOTGSS_UTMI_OTG_STATUS[9] POWERPRESENT at its default value (=0), and only to
fill in the USB2 VBUS status fields in the same register."

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
 drivers/usb/dwc3/dwc3-omap.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index b58546c..dd55e08 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -234,8 +234,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG
 				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
 				| USBOTGSS_UTMI_OTG_CTRL_SESSEND);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -244,8 +243,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
 		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
 				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -256,8 +254,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT);
+				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
 		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND
 				| USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux