If bootloader has set a wrong DPLL then we must trash those values
and re-program it anyways. This fixes USB3 devices not being enumerated
on beagle-x15 if usb was started in u-boot.
We don't re-program SATA DPLL if it is locked as it was causing
SATA failures if device was hotpluged after boot.
Reported-by: Robert Nelson <robertcnelson@xxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/phy/phy-ti-pipe3.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 0a477d2..bf46844 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -293,11 +293,18 @@ static int ti_pipe3_init(struct phy *x)
ret = ti_pipe3_dpll_wait_lock(phy);
}
- /* Program the DPLL only if not locked */
+ /* SATA has issues if re-programmed when locked */
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
- if (!(val & PLL_LOCK))
- if (ti_pipe3_dpll_program(phy))
- return -EINVAL;
+ if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node,
+ "ti,phy-pipe3-sata"))
+ return ret;
+
+ /* Program the DPLL */
+ ret = ti_pipe3_dpll_program(phy);
+ if (ret) {
+ ti_pipe3_disable_clocks(phy);
+ return -EINVAL;
+ }
return ret;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
