Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 0/2] OMAP IOMMU fixes to go with 5.4 OMAP IOMMU changes
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 6/6] ARM: dts: Drop legacy custom hwmods property for dra7 gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: dts: Drop legacy custom hwmods property for dra7 mmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: dts: Drop legacy custom hwmods property for dra7 i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: dts: Drop legacy custom hwmods property for dra7 uart
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP2+: Drop legacy platform data for dra7 mcasp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2+: Drop legacy platform data for dra7 mcspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] drop more platform data for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] Drop platform data for cpsw for am3/4 and dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  • From: Tom Rini <trini@xxxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Configure rstctrl reset for SGX on AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] ARM: dts: Configure rstctrl reset for SGX on AM3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: wl1271 broken on am3517-evm on for-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Configure rstctrl reset for SGX on AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/2] dts changes for omap variants for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/2] ti-sysc driver changes for v5.3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP3 ROM RNG probe failure on N900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/5] dt-bindings: dma: ti-edma: Add option for reserved channel ranges
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 5/5] dmaengine: ti: edma: Add support for handling reserved channels
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 3/5] dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 2/5] dmaengine: ti: edma: Only reset region0 access registers
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 0/5] dmaengine: ti: edma: Multicore usage related fixes
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH 1/5] dmaengine: ti: edma: Do not reset reserved paRAM slots
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Fix port lookup for SDI output
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: omap2: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Question about drm/omap: Remove panel-dpi driver
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH net] net: cpsw: fix NULL pointer exception in the probe error path
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] drm/omap: Fix port lookup for SDI output
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: OMAP DRM regression on N900
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP DRM regression on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP DRM regression on N900
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 6/8] soc: ti: omap_prm: add data for am33xx
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH net] net: cpsw: fix NULL pointer exception in the probe error path
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH net] net: cpsw: fix NULL pointer exception in the probe error path
  • From: Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: wl1271 broken on am3517-evm on for-next
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: Configure rstctrl reset for SGX on AM3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: wl1271 broken on am3517-evm on for-next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• musb: Could not flush host TX2 fifo: csr: 2403
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 6/8] soc: ti: omap_prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• wl1271 broken on am3517-evm on for-next
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 7/8] soc: ti: omap-prm: add dra7 PRM data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 6/8] soc: ti: omap_prm: add data for am33xx
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 0/8] soc: ti: Add OMAP PRM driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Suman Anna <s-anna@xxxxxx>
• omap-sham and omap-aes missing hwmod/dev_info
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/3] clk: ti: clkctrl: add support for polling clock status for enable only
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/8] soc: ti: Add OMAP PRM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/8] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/8] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Merlijn Wajer <merlijn@xxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 0/8] soc: ti: Add OMAP PRM driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 4/8] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 7/8] soc: ti: omap-prm: add dra7 PRM data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 6/8] soc: ti: omap_prm: add data for am33xx
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/8] dt-bindings: omap: add new binding for PRM instances
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/3] clk: ti: dra7xx: remove idlest polling from disabling ipu/dsp clocks
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/3] clk: ti: clkctrl: add support for polling clock status for enable only
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: Configure interconnect target module for omap3 sgx
  • From: Adam Ford <aford173@xxxxxxxxx>
• OMAP3-RNG and rng-tools
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Suspend/Resume Broken on AM43/AM33 Platforms
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] iommu/omap: Use the correct type for SLAB_HWCACHE_ALIGN
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/8] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] clk: ti: dra7xx: remove idlest polling from disabling ipu/dsp clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/3] clk: ti: couple of fixes towards 5.4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/3] clk: ti: clkctrl: add support for polling clock status for enable only
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Suspend/Resume Broken on AM43/AM33 Platforms
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: Suspend/Resume Broken on AM43/AM33 Platforms
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Suspend/Resume Broken on AM43/AM33 Platforms
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Pavel Machek <pavel@xxxxxx>
• Charging voltage for droid4 battery
  • From: Merlijn Wajer <merlijn@xxxxxxxxxx>
• Re: wifi on Motorola Droid 4 in 5.3-rc2
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• wifi on Motorola Droid 4 in 5.3-rc2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: omap36
  • From: André Roth <neolynx@xxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: André Roth <neolynx@xxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] USB: serial: option: Add Motorola modem UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] iommu/omap: Use the correct type for SLAB_HWCACHE_ALIGN
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo-som: Remove twl_keypad
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] clk: ti: Don't reference clk_init_data after registration
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] clk: ti: Don't reference clk_init_data after registration
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] clk: ti: Don't reference clk_init_data after registration
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Applied "regulator: twl: voltage lists for vdd1/2 on twl4030" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] Drop platform data for cpsw for am3/4 and dra7
  • From: grygorii <grygorii.strashko@xxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [GIT PULL] fixes for omap variants for v5.3-rc cycle
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCHv2] USB: serial: option: Add Motorola modem UARTs
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: omap36
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv2] USB: serial: option: Add Motorola modem UARTs
  • From: Pavel Machek <pavel@xxxxxxx>
• [PATCHv2] USB: serial: option: Add Motorola modem UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 21/22] ARM: omap1: use common clk framework
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [GIT PULL] fixes for omap variants for v5.3-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: André Roth <neolynx@xxxxxxxxx>
• [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: omap36
  • From: André Roth <neolynx@xxxxxxxxx>
• Re: [PATCH 21/22] ARM: omap1: use common clk framework
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• omap36
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Regression in Linux next with show wakeup sources stats in sysfs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: Configure interconnect target module for omap3 sgx
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: dts: Configure interconnect target module for omap3 sgx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] clk: ti: add clkctrl data omap5 sgx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] bus: ti-sysc: Add module enable quirk for SGX on omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2+: Drop legacy platform data for omap4 gpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Configure sgx interconnect data for some omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] bus: ti-sysc: Detect d2d when debug is enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] ARM: OMAP2+: Drop legacy platform data for omap4 d2d
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] ARM: dts: Configure d2d dts data for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] ARM: OMAP2+: Drop legacy watchdog platform data for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] ARM: dts: Drop custom hwmod property for omap4 i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] Drop more legacy platform data for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 3/3] ARM: OMAP2+: Drop legacy platform data for cpsw on dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP2+: Drop legacy platform data for cpsw on am3 and am4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] ARM: dts: Add fck for cpsw mdio for omap variants
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Drop platform data for cpsw for am3/4 and dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regression in Linux next with show wakeup sources stats in sysfs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Regression in Linux next with show wakeup sources stats in sysfs
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Regression in Linux next with show wakeup sources stats in sysfs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: dma: Mark expected switch fall-throughs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] DTS: ARM: gta04: define chosen/stdout-path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] bus: ti-sysc: fixes for reset handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 5/5] bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH for v5.3] ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra74x: Fix iodelay configuration for mmc3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am335x: Fix UARTs length
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-wega.dtsi: fix wrong card detect pin level
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• Applied "regulator: twl6030: use variable for device node" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: regulator: twl6030: Add retain-on-reset property" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "regulator: twl6030: workaround the VMMC reset behavior" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] mach-omap2/devices.c: set dma mask
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mach-omap2/devices.c: set dma mask
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH] mfd: omap-usb-host: Mark expected switch fall-throughs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 14/14] mfd: twl-core: convert to i2c_new_dummy_device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 13/14] mfd: palmas: convert to i2c_new_dummy_device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH for v5.3] ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Motorola Droid 4 SMS sending
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP2+: pdata quirk fixes for OMAP IOMMUs
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 09/22] fbdev: omap: avoid using mach/*.h files
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 01/22] ARM: omap1: innovator: pass lcd control address as pdata
  • From: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [balbi-usb:testing/next 2/13] drivers/usb/phy/phy-tahvo.c:434:4: error: 'struct device_driver' has no member named 'dev_groups'; did you mean 'groups'?
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/22] usb: omap: avoid mach/*.h headers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [alsa-devel] Regression in next with codec unload and snd_soc_component_get/put
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Regression in next with codec unload and snd_soc_component_get/put
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 2/13] drivers/usb/phy/phy-tahvo.c:434:4: error: 'struct device_driver' has no member named 'dev_groups'; did you mean 'groups'?
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
• Re: [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 22/22] ARM: omap1: enable multiplatform
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 21/22] ARM: omap1: use common clk framework
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 20/22] ARM: omap1: clk: use clk_init_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 18/22] ARM: omap1: clk: rework 'struct clk'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 19/22] ARM: omap1: clk: use common_clk-like callbacks
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 17/22] ARM: omap1: remove some dead clock code
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 16/22] ARM: omap1: move clk support into a single file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 15/22] ARM: omap1: move mach/*.h into mach directory
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 12/22] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 13/22] input: omap: void using mach/*.h headers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 10/22] usb: omap: avoid mach/*.h headers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 09/22] fbdev: omap: avoid using mach/*.h files
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 08/22] ARM: omap1: move CF chipselect setup to board file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 06/22] ARM: omap1: move some headers to include/linux/soc
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 04/22] ARM: omap1: move ohci phy power handling to board files
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 01/22] ARM: omap1: innovator: pass lcd control address as pdata
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 00/22] ARM: omap1 multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [balbi-usb:testing/next 2/13] drivers/usb/phy/phy-tahvo.c:434:4: error: 'struct device_driver' has no member named 'dev_groups'; did you mean 'groups'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [Bug] v5.3-rc3: arm: omap5: omapdss: omap_fbdev_init fails with lpae config and reports dma_mask error
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Bug] v5.3-rc3: arm: omap5: omapdss: omap_fbdev_init fails with lpae config and reports dma_mask error
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] kernfs: fix memleak in kernel_ops_readdir()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/8] dt-bindings: omap: add new binding for PRM instances
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/3] clk: ti: dra7xx: remove idlest polling from disabling ipu/dsp clocks
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/3] clk: ti: clkctrl: add support for polling clock status for enable only
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] clk: ti: dm814x: Add of_node_put() to prevent memory leak
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 0/3] clk: ti: couple of fixes towards 5.4
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] kernfs: fix memleak in kernel_ops_readdir()
  • From: Tejun Heo <tj@xxxxxxxxxx>
• Re: [PATCH] kernfs: fix memleak in kernel_ops_readdir()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/3] clk: ti: dra7xx: remove idlest polling from disabling ipu/dsp clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/3] clk: ti: clkctrl: add support for polling clock status for enable only
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/3] clk: ti: couple of fixes towards 5.4
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/3] bus: ti-sysc: allow reset sharing across devices
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/3] bus: ti-sysc: rework the reset handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/3] bus: ti-sysc: re-order the clkdm control around reset handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/3] bus: ti-sysc: fixes for reset handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: dra74x: Fix iodelay configuration for mmc3
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH 3/3] ARM: OMAP2+: omap-iommu.c conversion to ti-sysc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/3] ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/3] ARM: OMAP4+: remove pdata quirks for omap4+ iommus
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/3] ARM: OMAP2+: pdata quirk fixes for OMAP IOMMUs
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 8/8] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 7/8] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 6/8] soc: ti: omap_prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 5/8] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/8] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/8] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/8] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/8] soc: ti: Add OMAP PRM driver
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/8] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: Replace strncmp with str_has_prefix
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] clk: ti: dm814x: Add of_node_put() to prevent memory leak
  • From: Nishka Dasgupta <nishkadg.linux@xxxxxxxxx>
• Re: [PATCH] video: fbdev: omapfb_main: Mark expected switch fall-throughs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH] video: fbdev: omapfb_main: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH -next] usb: dwc3: omap: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v2 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• [PATCH 3/3] OMAP3: Enable SmartReflex on om36xx
  • From: André Roth <neolynx@xxxxxxxxx>
• [PATCH 2/3] OMAP: Initialize PM and SmartReflex after TWL probe
  • From: André Roth <neolynx@xxxxxxxxx>
• [PATCH 1/3] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: André Roth <neolynx@xxxxxxxxx>
• [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: André Roth <neolynx@xxxxxxxxx>
• [PATCH v2 6/6] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 5/6] irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 3/6] irqchip/irq-pruss-intc: Add support for shared and invalid interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH v2 0/6] Add TI PRUSS Local Interrupt Controller IRQChip driver
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] dmaengine: ti: edma: Remove 'Assignment in if condition'
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 2/4] counter: new TI eQEP driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ASoC: ti: Mark expected switch fall-throughs
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH] mach-omap2/devices.c: set dma mask
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] ARM: Replace strncmp with str_has_prefix
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• [PATCH] ASoC: ti: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] mfd: omap-usb-host: Mark expected switch fall-throughs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: dma: Mark expected switch fall-throughs
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 0/2] dmaengine: ti: omap-dma: Improved polling support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] mfd: omap-usb-host: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: dma: Mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v5 2/3] dmaengine: ti: edma: Correct the residue calculation (fix for memcpy)
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/4] new driver for TI eQEP
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 3/3] regulator: twl6030: workaround the VMMC reset behavior
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 2/3] regulator: twl6030: use variable for device node
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: regulator: twl6030: Add retain-on-reset property
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH 0/3] regulator: twl6030: Fix the VMMC reset behavior
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 1/1] ARM: dts: am335x: Fix UARTs length
  • From: Emmanuel Vadot <manu@xxxxxxxxxxx>
• [PATCH 0/1] ARM: dts: am335x: Fix UARTs length
  • From: Emmanuel Vadot <manu@xxxxxxxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] USB: serial: option: Add Motorola modem UARTs
  • From: Lars Melin <larsm17@xxxxxxxxx>
• Re: [PATCH 6/8] ARM: dts: Fix flags for gpio7
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 3/8] bus: ti-sysc: Fix handling of forced idle
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/8] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Suman Anna <s-anna@xxxxxx>
• Re: Backlight in motorola Droid 4
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] USB: serial: option: Add Motorola modem UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] serial: 8250_omap: Fix idling for unloaded serdev drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] ARM: OMAP2+: Remove unconfigured midlemode for am3 lcdc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] bus: ti-sysc: Fix handling of forced idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] bus: ti-sysc: Fix using configured sysc mask value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/8] ARM: dts: Fix lcdc sysc flags for am3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] ARM: dts: Fix flags for gpio7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] ti-sysc related warning fixes for v5.3-rc cycle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: nl80211 wlcore regression in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: nl80211 wlcore regression in next
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Pavel Machek <pavel@xxxxxx>
• Backlight in motorola Droid 4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 00/14] mfd: convert subsystem to i2c_new_dummy_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 13/14] mfd: palmas: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 14/14] mfd: twl-core: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: nl80211 wlcore regression in next
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-wega.dtsi: fix wrong card detect pin level
  • From: Teresa Remmet <t.remmet@xxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-cm-t335: Remove regulator-boot-off property
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
• Re: [PATCH] Enable backlight when trigger is activated
  • From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
• Re: USB Modem support for Droid 4
  • From: Pavel Machek <pavel@xxxxxxx>
• [PATCH] usb: dwc3: omap: squash include/linux/platform_data/dwc3-omap.h
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: USB Modem support for Droid 4
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 23/30] of/platform: Export of_platform_device_create_pdata()
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: USB Modem support for Droid 4
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: USB Modem support for Droid 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.1 105/141] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 078/101] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 132/171] PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• USB Modem support for Droid 4
  • From: Pavel Machek <pavel@xxxxxxx>
• [PATCH] Enable backlight when trigger is activated
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V3] cpufreq: Make cpufreq_generic_init() return void
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [Letux-kernel] [PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH v3 0/5] drm/panel-simple: Add panel parameters for ortustech-com37h3m05dtc/99dtc and sharp-lq070y3dg3b
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Merlijn Wajer <merlijn@xxxxxxxxxx>
• Re: [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] net: ethernet: ti: cpsw: Add of_node_put() before return and break
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH 02/12] Documentation/arm: repointer docs to Documentation/arch/arm
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• PCI: dra7xx: PCI_EXP_LNKCTL2 usage
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v5 1/3] dmaengine: ti: edma: Clean up the 2x32bit array register accesses
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v5 3/3] dmaengine: ti: edma: Support for polled (memcpy) completion
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v5 2/3] dmaengine: ti: edma: Correct the residue calculation (fix for memcpy)
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v5 0/3] dmaengine: ti: edma: Polled completion support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 0/2] dmaengine: ti: omap-dma: Improved polling support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 2/2] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH v2 1/2] dmaengine: ti: omap-dma: Readability cleanup in omap_dma_tx_status()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] net: ethernet: ti: cpsw: Add of_node_put() before return and break
  • From: Nishka Dasgupta <nishkadg.linux@xxxxxxxxx>
• [PATCH V3] cpufreq: Make cpufreq_generic_init() return void
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 081/219] gpio: omap: Fix lost edge wake-up interrupts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 079/219] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 078/219] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 060/158] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 059/158] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 045/105] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 044/105] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 26/53] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 27/53] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 33/73] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 34/73] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 206/249] net: ethernet: ti: cpsw: Assign OF node to slave devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 093/249] gpio: omap: Fix lost edge wake-up interrupts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 090/249] gpio: omap: fix lack of irqstatus_raw0 for OMAP4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 091/249] gpio: omap: ensure irq is enabled before wakeup
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 01/12] Documentation: move architectures together
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH V2] cpufreq: Make cpufreq_generic_init() return void
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] [net-next] davinci_cpdma: don't cast dma_addr_t to pointer
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH v4 3/3] dmaengine: ti: edma: Support for polled (memcpy) completion
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 01/12] Documentation: move architectures together
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH] cpufreq: Make cpufreq_generic_init() return void
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 03/12] Documentation/ia64: repointer docs to Documentation/arch/ia64
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 06/12] Documentation/mips: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 07/12] Documentation/parisc: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 10/12] Documentation/sparc: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 08/12] Dcumentation/powerpc: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 12/12] Documentation/xtensa: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 05/12] Documentation/s390: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 02/12] Documentation/arm: repointer docs to Documentation/arch/arm
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 04/12] Documentation/m68k: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 11/12] Documentation/x86: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 01/12] Documentation: move architectures together
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• [PATCH 09/12] Dcumentation/sh: repointer docs to Documentation/arch/
  • From: Alex Shi <alex.shi@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] irqchip/irq-pruss-intc: Add API to trigger a PRU sysevent
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] [net-next] davinci_cpdma: don't cast dma_addr_t to pointer
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] [net-next] davinci_cpdma: don't cast dma_addr_t to pointer
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH v4 net-next 05/11] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [linux-next:master 13028/13492] drivers/net/ethernet/ti/davinci_cpdma.c:725:5: sparse: sparse: symbol 'cpdma_chan_split_pool' was not declared. Should it be static?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH linux-next] net: ethernet: ti: davinci_cpdma: cpdma_chan_split_pool() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] ARM: dts: am335x-wega.dtsi: fix wrong card detect pin level
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: dwc: pci-dra7xx: Add missing include file
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH] PCI: dwc: pci-dra7xx: Add missing include file
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/5] dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v9 net-next 1/5] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v9 net-next 4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v9 net-next 3/5] net: ethernet: ti: davinci_cpdma: allow desc split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v9 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v9 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v9 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v8 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 1/2] DTS: ARM: gta04: define chosen/stdout-path
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/2] DTS: ARM: some minor updates and fixes for GTA04
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 6/6] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 3/6] irqchip/irq-pruss-intc: Add support for shared and invalid interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 1/6] dt-bindings: irqchip: Add PRUSS interrupt controller bindings
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 5/6] irqchip/irq-pruss-intc: Add API to trigger a PRU sysevent
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 4/6] irqchip/irq-pruss-intc: Add helper functions to configure internal mapping
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 0/6] Add TI PRUSS Local Interrupt Controller IRQChip driver
  • From: Suman Anna <s-anna@xxxxxx>
• [PATCH 2/6] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v8 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v8 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH v9 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v2] ARM: configs: Remove useless UEVENT_HELPER_PATH
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH v6 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 net-next 1/5] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Saeed Mahameed <saeedm@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: dwc: pci-dra7xx: Add missing include file
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• [PATCH v8 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v8 net-next 4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v8 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v8 net-next 3/5] net: ethernet: ti: davinci_cpdma: allow desc split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v8 net-next 1/5] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v8 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v7 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v7 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v7 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v7 net-next 1/5] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Improved memcpy polling support
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v4 3/3] dmaengine: ti: edma: Support for polled (memcpy) completion
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v7 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v7 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v7 net-next 4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v7 net-next 3/5] net: ethernet: ti: davinci_cpdma: allow desc split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v7 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v7 net-next 1/5] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH net-next V2] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH net-next V2] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH net-next V2] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v6 net-next 1/5] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH net-next V2] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v6 net-next 1/5] xdp: allow same allocator usage
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v6 net-next 1/5] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• [balbi-usb:testing/next 33/43] trace.c:undefined reference to `usb_decode_ctrl'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v6 net-next 1/5] xdp: allow same allocator usage
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• [PATCH v2 05/35] clk/ti: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 04/30] clk/ti: Use kmemdup rather than duplicating its implementation
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH v6 net-next 3/5] net: ethernet: ti: davinci_cpdma: allow desc split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v6 net-next 2/5] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v6 net-next 0/5] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v6 net-next 5/5] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v6 net-next 4/5] net: ethernet: ti: cpsw_ethtool: allow res split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v6 net-next 1/5] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 06/39] clk: ti: clkctrl: Fix returning uninitialized data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 12/39] ARM: omap2: remove incorrect __init annotation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/26] ARM: omap2: remove incorrect __init annotation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 01/13] clk: ti: clkctrl: Fix returning uninitialized data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/13] ARM: omap2: remove incorrect __init annotation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 2/8] ARM: omap2: remove incorrect __init annotation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 2/6] ARM: omap2: remove incorrect __init annotation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 02/26] clk: ti: clkctrl: Fix returning uninitialized data
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/6] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/6] xdp: allow same allocator usage
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH] net: core: page_pool: add user refcnt and reintroduce page_pool_destroy
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [GIT PULL v2] Immutable branch between MFD and Regulator due for the v5.3 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/6] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/6] xdp: allow same allocator usage
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH 0/5] Minor ti-sysc cleanups
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v5 net-next 0/6] net: ethernet: ti: cpsw: Add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 4/6] net: ethernet: ti: davinci_cpdma: allow desc split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 5/6] net: ethernet: ti: cpsw_ethtool: allow res split while down
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 6/6] net: ethernet: ti: cpsw: add XDP support
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 3/6] net: ethernet: ti: davinci_cpdma: return handler status
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 2/6] net: ethernet: ti: davinci_cpdma: add dma mapped submit
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH v5 net-next 1/6] xdp: allow same allocator usage
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH 0/3] Add HwSpinlock support for TI K3 SoCs
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 net-next 1/4] net: core: page_pool: add user cnt preventing pool deletion
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: omap: Add new compatible for J721E SoCs
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v4 net-next 1/4] net: core: page_pool: add user cnt preventing pool deletion
  • From: Jesper Dangaard Brouer <brouer@xxxxxxxxxx>
• Re: [PATCH V4 3/3] thermal/drivers/cpu_cooling: cpufreq_cooling_register returns an int
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 net-next 1/4] net: core: page_pool: add user cnt preventing pool deletion
  • From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
• [PATCH V4 3/3] thermal/drivers/cpu_cooling: cpufreq_cooling_register returns an int
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH V4 2/3] thermal/drivers/cpu_cooling: Unregister with the policy
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>