Hi! > So I ended up cleaning up omap2430 glue layer a bit for host mode with the > various reproducable errors I was seeing docking droid4 to a lapdock. There > are a few fixes, and then we end up removing all the devctl register tinkering > for omap2430 glue layer. I should have your recent patches up-to [PATCH] power: supply: cpcap-charger: Enable vbus boost voltage applied to linux-next, -0830. So... to get usb host to work even with stock kernel, I need a hub and external power... and "right" cable between phone and hub. When I plugged/unplugged it several times, I got ### usb unplug: musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80 musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80 ub0: stop stats: rx/tx 0/0, errs 0/0 l3_init_cm:clk:0040:0: failed to disable l3_init_cm:clk:00c0:0: failed to disable ### usb plug produces nothing ### usb unplug: musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80 musb-hdrc.0.auto: musb_set_peripheral: already in peripheral mode: 80 Hmm. I did it two more times, and now machine rebooted, and USB was powered from the phone for a while (3.6V). And I reproduced the crash on the next boot. Is there anything I may be missing in .config? Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
