Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 linux-next 2/4] arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/16] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] clk: let init callback return an error code
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [GIT PULL] fixes for omaps for v5.4 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v2] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• [PATCH v2] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 0/4] arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] ARM: dts: Fix gpio0 flags for am335x-icev2
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Add missing LCDC midlemode for am335x
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix gpio0 flags for am335x-icev2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: let init callback return an error code
  • From: Andrew Lunn <andrew@xxxxxxx>
• RE: [PATCH 2/3] clk: let init callback return an error code
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• RE: [PATCH 2/3] clk: let init callback return an error code
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• [PATCH 2/3] clk: let init callback return an error code
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: musb: Could not flush host TX2 fifo: csr: 2403
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 linux-next 1/4] arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-sham and omap-aes missing hwmod/dev_info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: Could not flush host TX2 fifo: csr: 2403
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH AUTOSEL 5.3 120/203] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: santosh.shilimkar@xxxxxxxxxx
• [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 1/4] arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 3/4] arm: configs: multi_v7_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 2/4] arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 0/4] arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: remoteproc: don't allow modular build
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv6 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tero Kristo <t-kristo@xxxxxx>
• remoteproc: don't allow modular build
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• RE: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: Fix wrong clocks for dra7 mcasp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] clk: ti: dra7: Fix mcasp8 clock bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] dra7 mcasp clock warning fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] fixes for omaps for v5.4 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v3 2/2] clk: ti: am4: Update AM4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• [PATCH v3 0/2] Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• Re: OMAP Maintainers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] cpcap charger and battery changes to deal with dropped voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] cpcap charger and battery fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCHv5 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh@xxxxxxxxxx>
• OMAP Maintainers
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo-baseboard: Reduce video regulator chatter
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] ARM: dts: Add OPP-V2 table for AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 7/8] cpufreq: ti-cpufreq: Add support for AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tero Kristo <t-kristo@xxxxxx>
• [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:60:53: warning: 'struct device' declared inside parameter list
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:37:25: error: field 'gsm_dlci' has incomplete type
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:62:33: error: implicit declaration of function 'to_serdev_device'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: musb: Cancel delayed work on host controller rmmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] hwrng: omap3-rom - Use devm hwrng and runtime PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] hwrng: omap3-rom - Use runtime PM instead of custom functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] hwrng: omap3-rom - Initialize default quality to get data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] hwrng: omap3-rom - Update to use standard driver data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] hwrng: omap3-rom - Call clk_prepare() on init and exit only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 2/2] ARM: omap3: Consolidate thermal references to common omap3
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 0/6] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 3/6] hwrng: omap3-rom - Call clk_prepare() on init and exit only
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/6] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] hwrng: omap3-rom - Fix missing clock by probing with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] hwrng: omap3-rom - Use runtime PM instead of custom functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] hwrng: omap3-rom - Update to use standard driver data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] hwrng: omap3-rom - Initialize default quality to get data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] hwrng: omap3-rom - Call clk_prepare() on init and exit only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC v2 2/2] ARM: omap3: Consolidate thermal references to common omap3
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/3] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 2/2] ARM: omap3: Consolidate thermal references to common omap3
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 4/4] DTS: bindings: omap: update bindings documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• RE: [PATCH 2/2] clk: ti: clk-33xx.c: Update GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 1/3] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv5 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 1/3] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv5 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCHv3 10/10] clk: ti: am33xx: drop idlest polling from pruss clkctrl clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 09/10] clk: ti: am43xx: drop idlest polling from pruss clkctrl clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 08/10] clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 05/10] clk: ti: omap5: add IVA subsystem clkctrl data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 07/10] clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 06/10] clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 04/10] dt-bindings: clk: add omap5 iva clkctrl definitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 01/10] clk: ti: clkctrl: fix setting up clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 03/10] clk: ti: clkctrl: add new exported API for checking standby info
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 02/10] clk: ti: clkctrl: convert to use bit helper macros instead of bitops
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 09/10] soc: ti: omap-prm: add omap5 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 08/10] soc: ti: omap-prm: add am4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 07/10] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 06/10] soc: ti: omap-prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 05/10] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 02/10] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 04/10] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 03/10] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 2/2] clk: ti: clk-33xx.c: Update GPIO number as per datasheet
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/2] clk: ti: clk-33xx.c: Update GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable HW Crypto engine modules
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 1/8] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH v3 2/8] ARM: dts: omap34xx & omap36xx: replace opp-v1 tables by opp-v2 for
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 1/8] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 4/8] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 8/8] ARM: dts: Add OPP-V2 table for AM3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 7/8] cpufreq: ti-cpufreq: Add support for AM3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 3/8] DTS: bindings: omap: update bindings documentation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/2] ARM: omap2plus_defconfig: Update for moved item
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: omap2plus defconfig cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• omap2plus defconfig cleanup
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: omap-mcbsp: TX Buffer Overflow
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] cpufreq: ti-cpufreq: Add support for AM3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] cpufreq: ti-cpufreq: Add support for AM3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] cpufreq: ti-cpufreq: Add support for AM3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-mcbsp: TX Buffer Overflow
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: Add OPP-V2 table for AM3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/2] cpufreq: ti-cpufreq: Add support for AM3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2] regulator: twl: voltage lists for vdd1/2 on twl4030
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Status of led-backlight driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Status of led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: Status of led-backlight driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Applied "ASoC: ams-delta: Take control over audio mute GPIO pins" to the asoc tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH] ASoC: ams-delta: Take control over audio mute GPIO pins
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 4/4] DTS: bindings: omap: update bindings documentation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/4] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] DTS: bindings: omap: update bindings documentation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: dts: Configure interconnect target module for omap3 sgx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC PATCH] ASoC: ams-delta: Take control over audio mute GPIO pins
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Status of led-backlight driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: omap-mcbsp: TX Buffer Overflow
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 0/4] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 4/4] DTS: bindings: omap: update bindings documentation
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 1/4] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/4] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2 05/35] clk/ti: Use kmemdup rather than duplicating its implementation
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCHv4 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: omap2plus_defconfig: Fix missing video
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv4 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• omap-mcbsp: TX Buffer Overflow
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: dma: ti-edma: Add option for reserved channel ranges
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv4 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCHv4 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix handling of invalid clocks
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix handling of invalid clocks
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Fix handling of invalid clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [BACKPORT 4.14.y 00/18] Backport candidate from TI 4.14 product kernel
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 02/18] PCI: dra7xx: Fix legacy INTD IRQ handling
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 03/18] drm/omap: panel-dsi-cm: fix driver
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 05/18] mfd: palmas: Assign the right powerhold mask for tps65917
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 06/18] ASoC: tlv320aic31xx: Handle inverted BCLK in non-DSP modes
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 07/18] mtd: spi-nor: enable 4B opcodes for mx66l51235l
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 08/18] mtd: spi-nor: cadence-quadspi: add a delay in write sequence
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 09/18] misc: pci_endpoint_test: Prevent some integer overflows
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 10/18] PCI: dra7xx: Add shutdown handler to cleanly turn off clocks
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 11/18] misc: pci_endpoint_test: Fix BUG_ON error during pci_disable_msi()
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 14/18] ASoC: davinci-mcasp: Handle return value of devm_kasprintf
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 12/18] mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 15/18] ASoC: davinci: Kill BUG_ON() usage
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 16/18] ASoC: davinci-mcasp: Fix an error handling path in 'davinci_mcasp_probe()'
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 17/18] i2c: omap: Trigger bus recovery in lockup case
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 18/18] cpufreq: ti-cpufreq: add missing of_node_put()
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 13/18] ASoC: tlv320dac31xx: mark expected switch fall-through
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• [BACKPORT 4.14.y 01/18] PCI: designware-ep: Fix find_first_zero_bit() usage
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v2 0/3] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Fix clock handling for no-idle quirks
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Fix clock handling for no-idle quirks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RFC v2 0/3] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [GIT PULL 1/2] ti-sysc driver changes for v5.3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.2 08/94] ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 11/94] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 13/94] ARM: dts: dra74x: Fix iodelay configuration for mmc3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 16/94] ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 03/52] ARM: dts: am57xx: Disable voltage switching for SD card
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 04/52] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 07/52] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/52] ARM: dts: dra74x: Fix iodelay configuration for mmc3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/52] ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 01/36] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/36] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 02/20] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/27] ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 01/27] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/36] ARM: dts: dra74x: Fix iodelay configuration for mmc3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 14/94] ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 12/94] ARM: dts: am335x: Fix UARTs length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 07/94] ARM: dts: Fix flags for gpio7
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 03/94] ARM: dts: am57xx: Disable voltage switching for SD card
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 04/94] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [GIT PULL 4/4] sgx soc glue changes for omaps for v5.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 3/4] drop more legacy pdata for omaps for v5.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 2/4] more ti-sysc driver changes for v5.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [GIT PULL 1/2] ti-sysc driver changes for v5.3
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH -next] fbdev: omapfb: use devm_platform_ioremap_resource() to simplify code
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/5] dmaengine: ti: edma: Multicore usage related fixes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [RFC v2 2/3] ARM: dts: replace opp-v1 tables by opp-v2 for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC v2 0/3] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC v2 1/3] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC v2 3/3] ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 5/5] ARM: dts: omap3-beagle: make explicitly compatible to ti,omap34xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] dmaengine: ti: edma: Remove 'Assignment in if condition'
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL 2/2] dts changes for omap variants for v5.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC 5/5] ARM: dts: omap3-beagle: make explicitly compatible to ti,omap34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [GIT PULL 1/4] soc changes for omap variants for v5.4
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/5] dt-bindings: dma: ti-edma: Add option for reserved channel ranges
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC 2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Enable vbus boost voltage
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Enable vbus boost voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: counter: new bindings for TI eQEP
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 0/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Letux-kernel] [RFC PATCH 0/3] Enable 1GHz support on omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [RFC 4/5] ARM: dts: omap3-n950-n9: remove opp-v1 table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 5/5] ARM: dts: omap3-beagle: make explicitly compatible to ti,omap34xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 1/5] cpufreq: ti-cpufreq: add support for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 2/5] ARM: dts: add support for opp-v2 for omap34xx and omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 0/5] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 3/5] ARM: dts: omap3-evm-37xx: fix compatible from omap3630 to omap36xx
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: omap36 1GHz OPP
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Enable vbus boost voltage
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCHv3 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v3 2/6] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 3/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH] usb: musb: omap2430: Idle musb on init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: next-20190830 on Droid 4 was Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Pavel Machek <pavel@xxxxxxx>
• next-20190830 on Droid 4 was Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Linux-next: File system over NFS broken on DRA7/AM5 platforms
  • From: keerthy <j-keerthy@xxxxxx>
• [PATCH] power: supply: cpcap-charger: Enable vbus boost voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] usb: musb: omap2430: Clean up enable and remove devctl tinkering
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/4] usb: musb: Add musb_set_host and peripheral and use them for omap2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/4] usb: musb: omap2430: Handle multiple ID ground interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/4] usb: musb: omap2430: Wait on enable to avoid babble
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Charging voltage for droid4 battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] phy: cpcap-usb: Fix flakey host idling and enumerating of devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] phy: mapphone-mdm6600: Fix uninitialized status value regression
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: santosh.shilimkar@xxxxxxxxxx
• [PATCHv3 10/10] soc: ti: omap-prm: add omap5 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 09/10] soc: ti: omap-prm: add am4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 08/10] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 07/10] soc: ti: omap-prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 06/10] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 02/10] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 05/10] soc: ti: omap-prm: sync func clock status with resets
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 04/10] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 03/10] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv3 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 01/11] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 02/11] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 03/11] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 02/11] soc: ti: add initial PRM driver with reset control support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCHv2 02/11] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 05/11] soc: ti: omap-prm: sync func clock status with resets
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 4/5] dt-bindings: dma: ti-edma: Add option for reserved channel ranges
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH 4/5] dt-bindings: dma: ti-edma: Add option for reserved channel ranges
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCHv2 0/6] clk: ti: reset handling support fixes
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCHv2 05/11] soc: ti: omap-prm: sync func clock status with resets
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCHv2 03/11] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: omap2430: Fix flakeyness enumerating when connected to a lapdock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 02/11] soc: ti: add initial PRM driver with reset control support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 4/4] sgx soc glue changes for omaps for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 3/4] drop more legacy pdata for omaps for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/4] more ti-sysc driver changes for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/4] soc changes for omap variants for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: am3517-evm: Fix missing video
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 2/3] ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/3] ARM: omap2plus_defconfig: Fix missing video
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv2] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: dts: omap4-droid4: Allow 350mA current for USB peripherals
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: omap4-droid4: Allow 350mA current for USB peripherals
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: musb: omap2430: Fix flakeyness enumerating when connected to a lapdock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC] ARM: omap3: Enable HWMODS for HW Random Number Generator
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 10/10] ARM: dts: omap5: convert IOMMUs to use ti-sysc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/10] ARM: dts: omap4: convert IOMMUs to use ti-sysc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/10] ARM: dts: dra7: convert IOMMUs to use ti-sysc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/10] ARM: dts: dra74x: convert IOMMUs to use ti-sysc
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/10] ARM: dts: omap5: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/10] ARM: dts: am43xx: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/10] ARM: dts: am33xx: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/10] ARM: dts: omap4: add PRM nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 02/10] ARM: dts: dra7: add PRM nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/10] ARM: dts: omap changes for IOMMU / reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/10] ARM: dts: omap5: add IVA clkctrl nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 11/11] soc: ti: omap-prm: add omap5 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 10/11] soc: ti: omap-prm: add am4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 09/11] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 08/11] soc: ti: omap-prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 07/11] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 06/11] soc: ti: omap-prm: support resets with no associated clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 05/11] soc: ti: omap-prm: sync func clock status with resets
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 04/11] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 02/11] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 03/11] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 00/11] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 01/11] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 6/6] clk: ti: omap5: add IVA subsystem clkctrl data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 4/6] clk: ti: clkctrl: add API to notify reset status
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 5/6] dt-bindings: clk: add omap5 iva clkctrl definitions
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 3/6] clk: ti: clkctrl: add new exported API for checking standby info
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 2/6] clk: ti: clkctrl: convert to use bit helper macros instead of bitops
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 0/6] clk: ti: reset handling support fixes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 1/6] clk: ti: clkctrl: fix setting up clkctrl clocks
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: OMAP3 ROM RNG probe failure on N900
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 3/3] clk: ti: dra7xx: add timer_sys_ck clock alias
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/2] ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
  • From: Suman Anna <s-anna@xxxxxx>