Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/09/2019 18:37, Tero Kristo wrote:

If you can provide details about what clock framework / driver does wrong (sample clk_set_xyz call sequence, expected results via clk_get_xyz, and what fails), I can take a look at it. Just reporting arbitrary display driver issues I won't be able to debug at all (I don't have access to any of the displays, nor do I want to waste time debugging them without absolutely no knowledge whatsoever.)

I used your hack patches to allow changing rates via debugfs. And set dss1_alwon_fck_3430es2 to 27000000 or 27870967. The end result was that DSS gets some very high clock from dss1_alwon_fck_3430es2, as the frame rate jumps to many hundreds fps.

So, these numbers are not real, but to give the idea what I saw. Running first with 50 MHz, I can see, say, 40 fps. Then I set the clock to 30 MHz, and fps dropped to, say, 30fps, as expected with lower clock. Then I set the clock to 27MHz (or the other one), expecting a bit lower fps, but instead I saw hundreds of fps.

I don't know if there's any other way to observe the wrong clock rate but have the dss enabled and running kmstest or similar. I can help you set that up next week, should be trivial. You don't need a display for that.

 Tomi

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux