Hi, * H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [190913 09:50]: > Hi Tony, > > > Am 14.08.2019 um 15:14 schrieb Tony Lindgren <tony@xxxxxxxxxxx>: > > > > The following can be tested via sysfs with the following to ensure the SGX > > module gets enabled and disabled properly: > > > > # echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control > > # rwmem 0x5600fe00 # revision register > > 0x5600fe00 = 0x40000000 > > # echo auto > /sys/bus/platform/devices/5600fe00.target-module/power/control > > # rwmem 0x5000fe00 > > Bus error > > > > Note that this patch depends on the PRM rstctrl driver that has > > been recently posted. > > Do you have a list of these patches or a git for pulling the complete set > of changes? Does it depend on mainline or linux-next? You need the drivers/bus/ti-sysc.c changes from Linux next, and the most recent clkctrl and rstctrl patches posted by Tero. > I tried to find the correct patches but it does not seem to work for > me on beaglebone. OK can you please check the dependencies again and let me know if you still have issues? Regards, Tony
