From: Suman Anna <s-anna@xxxxxx>
The IPU and DSP remote processor cores and their corresponding MMUs on
OMAP4 SoCs have hardreset lines associated with them and are controlled
by a PRCM reset line each. Any clkctrl enable/disable operations cannot
be checked for module enabled/disabled status independent of the reset
operation, and this causes some unwanted timeouts in the kernel and
unbalanced states for these clocks. These details should be handled by
the driver integration code itself.
Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so
that these module status checks are skipped.
Signed-off-by: Suman Anna <s-anna@xxxxxx>
---
drivers/clk/ti/clk-44xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index b10ed0429091..2b4dab632318 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -37,7 +37,7 @@ static const struct omap_clkctrl_reg_data omap4_mpuss_clkctrl_regs[] __initconst
};
static const struct omap_clkctrl_reg_data omap4_tesla_clkctrl_regs[] __initconst = {
- { OMAP4_DSP_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_iva_m4x2_ck" },
+ { OMAP4_DSP_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_NO_IDLEST, "dpll_iva_m4x2_ck" },
{ 0 },
};
@@ -219,7 +219,7 @@ static const struct omap_clkctrl_reg_data omap4_l3_2_clkctrl_regs[] __initconst
};
static const struct omap_clkctrl_reg_data omap4_ducati_clkctrl_regs[] __initconst = {
- { OMAP4_IPU_CLKCTRL, NULL, CLKF_HW_SUP, "ducati_clk_mux_ck" },
+ { OMAP4_IPU_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_NO_IDLEST, "ducati_clk_mux_ck" },
{ 0 },
};
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
