Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 7/7] ARM: DTS: omap5: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 6/7] ARM: DTS: omap4: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 4/7] ARM: DTS: omap3: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] omapfb: reduce stack usage
  • From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: OMAP2+: Drop legacy platform data for musb on omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] ARM: OMAP2+: Drop legacy platform data for omap4 mcasp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcasp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] ARM: OMAP2+: Drop legacy platform data for dra7 rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] ARM: OMAP2+: Drop legacy platform data for am3 and am4 rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/10] ARM: OMAP2+: Drop legacy platform data for omap4 hdq1w
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] ARM: OMAP2+: Drop legacy platform data for dra7 hdq1w
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/10] ARM: OMAP2+: Drop legacy platform data for am4 hdq1w
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/10] ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/10] Drop even more legacy platform data for omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omapfb: reduce stack usage
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [Patch 1/9] ARM: dts: dra7: add cam clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 4/9] ARM: dts: DRA72: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 2/9] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 0/9] ARM: dts: dra7: add cal nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 3/9] ARM: dts: dra7-l4: Add ti-sysc node for CAM
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 8/9] arm64: dts: k3-am65-main Add CAL node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 9/9] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 5/9] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 6/9] arm: dtsi: dra76x: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH 0/2] OMAP IOMMU fixes to go with 5.4 OMAP IOMMU changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/21] Drop more legacy platform data for omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH -next] ARM: OMAP2+: Make some functions static
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] fbdev/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] fbdev/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH -next] ARM: OMAP2+: Make some functions static
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• ARM: add __always_inline to functions called from __get_user_check()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 00/21] Drop more legacy platform data for omaps
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 0/2] OMAP IOMMU fixes to go with 5.4 OMAP IOMMU changes
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v3 1/6] bus/ti-pwmss: move TI PWMSS driver from PWM to bus subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 21/21] ARM: OMAP2+: Drop legacy platform data for omap5 wdt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 20/21] ARM: OMAP2+: Drop legacy platform data for dra7 wdt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 19/21] ARM: OMAP2+: Drop legacy platform data for am3 and am4 wdt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 18/21] ARM: dts: Drop custom hwmod property for omap5 mmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/21] ARM: dts: Drop custom hwmod property for am4 mmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/21] ARM: dts: Drop custom hwmod property for am3 mmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/21] ARM: dts: Drop custom hwmod property for omap5 i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/21] ARM: dts: Drop custom hwmod property for am4 i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/21] ARM: dts: Drop custom hwmod property for am3 i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/21] ARM: dts: Drop custom hwmod property for omap5 uart
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/21] ARM: dts: Drop custom hwmod property for am4 uart
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/21] ARM: dts: Drop custom hwmod property for am33xx uart
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/21] ARM: OMAP2+: Drop legacy platform data for omap5 mcspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/21] ARM: dts: Drop custom hwmod property for omap5 mcspi
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/21] ARM: OMAP2+: Drop legacy platform data for omap5 mailbox
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/21] ARM: OMAP2+: Drop legacy platform data for omap4 mailbox
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/21] ARM: OMAP2+: Drop legacy platform data for am3 and am4 mailbox
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/21] ARM: OMAP2+: Drop legacy platform data for dra7 mailbox
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/21] ARM: dts: Drop custom hwmod property for omap5 gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/21] ARM: dts: Drop custom hwmod property for omap4 gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/21] ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpio
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/21] Drop more legacy platform data for omaps
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Fix watchdog quirk handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 10/10] crypto: omap-aes: fixup aligned data cleanup
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/10] crypto: omap-sham: fix split update cases with cryptomgr tests
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/10] crypto: omap-aes-gcm: fix corner case with only auth data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/10] crypto: omap-sham: fix buffer handling for split test cases
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/10] crypto: omap-sham: split up data to multiple sg elements with huge data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/10] crypto: omap-aes: add IV output handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/10] crypto: omap-aes: remove the sysfs group during driver removal
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/10] crypto: omap-des: add IV output handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/10] crypto: omap fixes towards 5.5
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 02/10] crypto: omap-sham: remove the sysfs group during driver removal
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 8/8] ARM: OMAP2+: Initialize voltage controller for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] cpcap battery simplification and calibrate support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv3 0/2] cpcap charger and battery changes to deal with dropped voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] cpcap charger and battery fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 4/4] Bluetooth: btwilink: drop superseded driver
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• [Patch 2/3] ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 3/3] ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 0/3] ARM: dts: am43x-vpfe/ov2659.patch
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Benoit Parrot <bparrot@xxxxxx>
• [PATCH 2/2] ARM: OMAP2+: Simplify code for clkdm_clock_enable and disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: Drop unused enable_wakeup and disable_wakeup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] more fixes for omaps for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 06/10] ARM: dts: imx: Rename "iram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: musb: omap2430: Wait on enable to avoid babble
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 8/8] ARM: OMAP2+: Initialize voltage controller for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: OMAP2+: Allow core oswr for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Drop bogus wkup domain oswr setting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V5 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] davinci_cpdma: make cpdma_chan_split_pool static
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] davinci_cpdma: make cpdma_chan_split_pool static
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 05/25] crypto: omap - switch to skcipher API
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v3 06/10] ARM: dts: imx: Rename "iram" node to "sram"
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 8/8] ARM: OMAP2+: Initialize voltage controller for omap4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 7/8] ARM: OMAP2+: Allow core oswr for omap4
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/8] ARM: OMAP2+: Drop bogus wkup domain oswr setting
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/8] ARM: OMAP2+: Configure voltage controller for cpcap
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 7/7] usb: musb: Get rid of omap2430_musb_set_vbus()
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH] ARM: dts: Add minimal support for Droid Bionic xt875
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/5] power: supply: cpcap-battery: Simplify short term power average calculation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/5] power: supply: cpcap-battery: Simplify short term power average calculation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/8] ARM: OMAP2+: Remove unused wakeup_cpu
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/5] power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/5] power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/7] usb: musb: omap2430: Handle multiple ID ground interrupts
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH 2/2] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 5/5] power: supply: cpcap-battery: Add basic coulomb counter calibrate support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/5] power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/5] power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [Letux-kernel] Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv3] wlcore: clean-up clearing of WL1271_FLAG_IRQ_RUNNING
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: sram: Convert Samsung Exynos SYSRAM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 02/10] dt-bindings: sram: Convert Samsung Exynos SYSRAM bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/10] dt-bindings: sram: Convert SRAM bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] ARM: dts: omap4+: Add PRM nodes for reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Use level interrupt for omap4 & 5 wlcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Use level interrupt for omap4 & 5 wlcore
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: omapdrm: dsi panels
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: musb: omap2430: Wait on enable to avoid babble
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 5/5] ARM: dts: omap5: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/5] ARM: dts: omap4: add PRM nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/5] ARM: dts: dra7: add PRM nodes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/5] ARM: dts: am43xx: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/5] ARM: dts: am33xx: Add PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/5] ARM: dts: omap4+: Add PRM nodes for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: omapdrm: dsi panels
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Use level interrupt for omap4 & 5 wlcore
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: omapdrm: dsi panels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: omapdrm: dsi panels
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: omapdrm: dsi panels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: omapdrm: dsi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• omapdrm: dsi panels
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 8/8] ARM: OMAP2+: Initialize voltage controller for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] ARM: OMAP2+: Allow core oswr for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] ARM: OMAP2+: Allow per oswr for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] ARM: OMAP2+: Configure voltage controller for cpcap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] ARM: OMAP2+: Update 4430 voltage controller operating points
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] ARM: OMAP2+: Remove bogus warnings for machines without twl PMIC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] ARM: OMAP2+: Drop bogus wkup domain oswr setting
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] ARM: OMAP2+: Remove unused wakeup_cpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] Improve PM for omap4 devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: dts: Add minimal support for Droid Bionic xt875
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] usb: musb: Get rid of omap2430_musb_set_vbus()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] usb: musb: omap2430: Idle musb on init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] usb: musb: omap2430: Clean up enable and remove devctl tinkering
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] usb: musb: Add musb_set_host and peripheral and use them for omap2430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] usb: musb: omap2430: Handle multiple ID ground interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] usb: musb: omap2430: Wait on enable to avoid babble
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/7] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] power: supply: cpcap-battery: Add basic coulomb counter calibrate support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] power: supply: cpcap-battery: Read and save integrator register CCI
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] power: supply: cpcap-battery: Simplify short term power average calculation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] power: supply: cpcap-battery: Simplify coulomb counter calculation with div_s64
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] power: supply: cpcap-battery: Move coulomb counter units per lsb to ddata
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] cpcap battery simplification and calibrate support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] cpcap charger and battery changes to deal with dropped voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 2/2] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/2] cpcap charger and battery fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMA
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Patch 3/3] ARM: dts: dra7: Add ti-sysc node for VPE
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 2/3] ARM: dts: dra7: add vpe clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch 0/3] ARM: dts: dra7: add vpe nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [PATCH AUTOSEL 5.3 04/68] clk: ti: dra7: Fix mcasp8 clock bits
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 05/68] ARM: dts: Fix wrong clocks for dra7 mcasp
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 14/68] ARM: dts: Fix gpio0 flags for am335x-icev2
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 15/68] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 16/68] ARM: OMAP2+: Add missing LCDC midlemode for am335x
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 17/68] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 07/26] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 11/26] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/21] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 05/11] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 04/11] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 04/13] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/13] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/26] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 09/21] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCHv3] wlcore: clean-up clearing of WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Use level interrupt for omap4 & 5 wlcore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] ARM: OMAP2+: force iomem for omap_interconnect_sync
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)
  • From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
• Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: "santosh.shilimkar@xxxxxxxxxx" <santosh.shilimkar@xxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: OMAP2+: pm33xx-core: make am43xx_get_rtc_base_addr static
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: force iomem for omap_interconnect_sync
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 2/2] ARM: OMAP2+: make omap44xx_sha0_hwmod and omap44xx_l3_main_2__des static
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP2+: make dra7xx_sha0_hwmod static
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 0/4] Convert all btwilink users to hci_ll and drop btwilink
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCHv2 7/7] drm/omap: hdmi4: fix use of uninitialized var
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] bus: ti-sysc: fix reset sequencing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv8 9/9] soc: ti: omap-prm: add omap5 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 8/9] soc: ti: omap-prm: add am4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 7/9] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 5/9] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 6/9] soc: ti: omap-prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 4/9] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 3/9] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 2/9] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 0/9] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv8 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv7 2/9] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/11] ARM: OMAP2+: do not export am43xx_control functions
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 07/11] ARM: OMAP2+: prm44xx: make prm_{save,restore}_context static
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 06/11] ARM: OMAP2+: do not export am43xx_control functions
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 07/11] ARM: OMAP2+: prm44xx: make prm_{save,restore}_context static
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCHv7 3/9] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCHv7 2/9] soc: ti: add initial PRM driver with reset control support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 05/10] ARM: dts: dove: Rename "sa-sram" node to "sram"
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 9/9] soc: ti: omap-prm: add omap5 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 8/9] soc: ti: omap-prm: add am4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 6/9] soc: ti: omap-prm: add data for am33xx
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 7/9] soc: ti: omap-prm: add dra7 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 5/9] soc: ti: omap-prm: add omap4 PRM data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 4/9] soc: ti: omap-prm: add support for denying idle for reset clockdomain
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 1/9] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 3/9] soc: ti: omap-prm: poll for reset complete during de-assert
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 2/9] soc: ti: add initial PRM driver with reset control support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv7 0/9] soc: ti: add OMAP PRM driver (for reset)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/5] Fix SPI module alias for panels used by omapdrm
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/2] ARM: dts: omap3: Add cpu trips and cooling map for omap34/36 families
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] configs: omap2plus: Enable VIDEO_MT9P031 module
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 5/5] drm/panel: tpo-td043mtea1: Fix SPI alias
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 4/5] drm/panel: tpo-td028ttec1: Fix SPI alias
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/3] bus: ti-sysc: fix reset sequencing
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH RFC] DT support for omap4-iss
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 4/5] drm/panel: tpo-td028ttec1: Fix SPI alias
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] Fix SPI module alias for panels used by omapdrm
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• [PATCHv2] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] Fix SPI module alias for panels used by omapdrm
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 0/5] Fix SPI module alias for panels used by omapdrm
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] drm: panels: fix spi aliases of former omap panels
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm: panels: fix spi aliases of former omap panels
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 5/5] drm/panel: tpo-td043mtea1: Fix SPI alias
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] drm/panel: tpo-td028ttec1: Fix SPI alias
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] drm/panel: sony-acx565akm: Fix SPI alias
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] drm/panel: nec-nl8048hl11: Fix SPI alias
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] drm/panel: lg-lb035q02: Fix SPI alias
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/5] Fix SPI module alias for panels used by omapdrm
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] drm: panels: fix spi aliases of former omap panels
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RFC] DT support for omap4-iss
  • From: Michael Allwright <allsey87@xxxxxxxxx>
• Re: [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
• [PATCH] drm: panels: fix spi aliases of former omap panels
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 0/3] bus: ti-sysc: fix reset sequencing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: iss: camera interface omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RFC] DT support for omap4-iss
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix idling for unloaded serdev drivers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Lay common foundation to make PVR/SGX work without hacks on OMAP34xx, OMAP36xx, AM335x and potentially OMAP4, OMAP5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] wlcore: fix race for WL1271_FLAG_IRQ_RUNNING
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Applied "regulator: pbias: Get rid of struct pbias_regulator_data" to the regulator tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/3] bus: ti-sysc: re-order reset and main clock controls
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/3] bus: ti-sysc: fix reset sequencing
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/3] bus: ti-sysc: drop the extra hardreset during init
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/3] bus: ti-sysc: avoid toggling power state of module during probe
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/2] clk: ti: am43xx: drop idlest polling from gfx clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/2] clk: ti: am33xx: drop idlest polling from gfx clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/2] clk: ti: fix GFX clocks for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] regulator: pbias: Get rid of struct pbias_regulator_data
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH] ARM: dts: Set status to disable for MMC3
  • From: Emmanuel Vadot <manu@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add missing LCDC midlemode for am335x
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [Letux-kernel] [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 03/10] ARM: dts: exynos: Rename SysRAM node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] serial: 8250_omap: Fix gpio check for auto RTS and CTS
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 4/6] ARM: dts: Configure sgx for omap5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  • From: Graeme Smecher <gsmecher@xxxxxxxxxxxxxxxxxxx>
• [PATCH 04/10] drivers: net: davinci_mdio: Use of_device_get_match_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 00/10] Stop NULLifying match pointer in of_match_device()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] serial: 8250_omap: Fix idling for unloaded serdev drivers
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: iss: camera interface omap5
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: iss: camera interface omap5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-torpedo-som: Remove twl_keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• DM3730 Bluetooth Performance differences between SERIAL_8250_OMAP vs SERIAL_OMAP
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-torpedo-som: Remove twl_keypad
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCHv2 1/4] ARM: dts: LogicPD Torpedo: Add WiLink UART node
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] fixes for omaps for v5.4
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 2/4] ARM: dts: IGEP: Add WiLink UART node
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 0/4] Convert all btwilink users to hci_ll and drop btwilink
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 4/4] Bluetooth: btwilink: drop superseded driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 3/4] ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCHv2 1/4] ARM: dts: LogicPD Torpedo: Add WiLink UART node
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
  • From: Adam Ford <aford173@xxxxxxxxx>
• [GIT PULL] fixes for omaps for v5.4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 10/10] ARM: dts: omap: Rename "ocmcram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 09/10] ARM: dts: am: Rename "ocmcram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 08/10] ARM: dts: tegra: Rename "iram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 07/10] ARM: dts: keystone: Rename "msmram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 06/10] ARM: dts: imx: Rename "iram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 05/10] ARM: dts: dove: Rename "sa-sram" node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 04/10] arm64: dts: tegra: Rename sysram node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 03/10] ARM: dts: exynos: Rename SysRAM node to "sram"
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: sram: Convert Samsung Exynos SYSRAM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: sram: Convert SRAM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/4] clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] drm/omap: fix max fclk divider for omap36xx
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/4] clk: ti: divider: convert to use min,max,mask instead of width
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/4] clk: ti: divider: cleanup ti_clk_parse_divider_data API
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 4/4] ARM: dts: omap3: fix DPLL4 M4 divider max value
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/4] clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/4] clk: ti: re-work divider clock support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: am335x-sancloud-bbe: Fix PHY mode for ethernet
  • From: Jeroen Hofstee <jhofstee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v2] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V4 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V4 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V4 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V4 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Philipp Puschmann <philipp.puschmann@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 00/14] Add support for FM radio in hcill and kill TI_ST
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH] Bluetooth: hci_ll: set operational frequency earlier
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 linux-next 2/4] arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: am4372: Set memory bandwidth limit for DISPC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/16] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] clk: let init callback return an error code
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [GIT PULL] fixes for omaps for v5.4 merge window
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH v2] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• [PATCH v2] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• musb: cppi41: broken high speed FTDI functionality when connected to musb directly
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] drm/omap: Migrate minimum FCK/PCK ratio from Kconfig to dts
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: omap3.dtsi: Fix AES and SHA Engines
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 linux-next 0/4] arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] ARM: dts: Fix gpio0 flags for am335x-icev2
  • From: Lokesh Vutla <lokeshvutla@xxxxxx>
• [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Add missing LCDC midlemode for am335x
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix gpio0 flags for am335x-icev2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] clk: let init callback return an error code
  • From: Andrew Lunn <andrew@xxxxxxx>
• RE: [PATCH 2/3] clk: let init callback return an error code
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• RE: [PATCH 2/3] clk: let init callback return an error code
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• [PATCH 2/3] clk: let init callback return an error code
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: musb: Could not flush host TX2 fifo: csr: 2403
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap2plus_defconfig: Update for removed items
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 linux-next 1/4] arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap-sham and omap-aes missing hwmod/dev_info
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: musb: Could not flush host TX2 fifo: csr: 2403
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH AUTOSEL 5.3 120/203] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 109/185] ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: santosh.shilimkar@xxxxxxxxxx
• [PATCH v2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv5 00/10] soc: ti: add OMAP PRM driver (for reset)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 linux-next 4/4] arm64: configs: defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 1/4] arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 3/4] arm: configs: multi_v7_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 2/4] arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m to y
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v2 linux-next 0/4] arm/arm64: configs: Convert all CONFIG_REMOTEPROC instances to y
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: remoteproc: don't allow modular build
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv6 10/10] ARM: OMAP2+: pdata-quirks: add PRM data for reset support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv6 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tero Kristo <t-kristo@xxxxxx>
• remoteproc: don't allow modular build
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• RE: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix hidden dependency to node name with reg-names
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 2/2] ARM: dts: Fix wrong clocks for dra7 mcasp
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] clk: ti: dra7: Fix mcasp8 clock bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] dra7 mcasp clock warning fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] fixes for omaps for v5.4 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFC] ARM: dts: omap36xx: Enable thermal throttling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v3 2/2] clk: ti: am4: Update AM4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• [PATCH v3 1/2] clk: ti: am3: Update AM3 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• [PATCH v3 0/2] Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• Re: OMAP Maintainers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <Ankur.Tyagi@xxxxxxxxxxxxx>
• [PATCH 3/3] power: supply: cpcap-charger: Adjust current based on charger interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] power: supply: cpcap-charger: Allow changing constant charge voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] power: supply: cpcap-battery: Fix handling of lowered charger voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] cpcap charger and battery changes to deal with dropped voltage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] power: supply: cpcap-charger: Improve battery detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] power: supply: cpcap-battery: Check voltage before orderly_poweroff
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] power: supply: cpcap-charger: Limit voltage to 4.2V for battery
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] cpcap charger and battery fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next] net: ethernet: ti: use devm_platform_ioremap_resource() to simplify code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCHv5 01/10] dt-bindings: omap: add new binding for PRM instances
  • From: Rob Herring <robh@xxxxxxxxxx>
• OMAP Maintainers
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 3/3] ARM: logicpd-torpedo-37xx-devkit-28: Reference new DRM panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo-baseboard: Reduce video regulator chatter
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 5/8] ARM: dts: Drop bogus ahclkr clocks for dra7 mcasp 3 to 8
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2] clk: ti: Update AM3/4 GPIO number as per datasheet
  • From: Ankur Tyagi <ankur.tyagi@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] ARM: dts: Add OPP-V2 table for AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 7/8] cpufreq: ti-cpufreq: Add support for AM3517
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 6/8] ARM: dts: omap36xx: using OPP1G needs to control the abb_ldo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2] ARM: dts: omap36xx: Enable thermal throttling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Letux-kernel] [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tero Kristo <t-kristo@xxxxxx>
• [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:60:53: warning: 'struct device' declared inside parameter list
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 3/15] include/linux/mfd/motorola-mdm.h:37:25: error: field 'gsm_dlci' has incomplete type
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-mdm-v5.3 1/15] include/linux/serdev-gsm.h:62:33: error: implicit declaration of function 'to_serdev_device'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] musb host improvments mostly for omap2430 glue
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: musb: Cancel delayed work on host controller rmmod
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/7] hwrng: omap3-rom - Use devm hwrng and runtime PM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/7] hwrng: omap3-rom - Use runtime PM instead of custom functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/7] hwrng: omap3-rom - Initialize default quality to get data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/7] hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/7] hwrng: omap3-rom - Update to use standard driver data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/7] ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 0/7] Non-urgent fixes and improvments for omap3-rom-rng
  • From: Tony Lindgren <tony@xxxxxxxxxxx>