Tony Lindgren <tony@xxxxxxxxxxx> wrote on Fri [2019-Nov-08 08:55:54 -0800]:
> Hi,
>
> * Benoit Parrot <bparrot@xxxxxx> [191104 20:39]:
> > Add clkctrl nodes for VPE module.
>
> Can you please add a comment describing that we currently need to
> use custom node names here instead of the standard naming?
Tony, what do you mean "custom node name" here?
I followed the exact same syntax that was already there... confused..
Benoit
>
> I can queue this and other dts change once I have an immutable clock
> changes branch from Tero.
>
> Or if Tero wants to also pick up the clock node dtsi patch I can ack it,
> up to Tero.
>
> Regards,
>
> Tony
>
>
> > Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> > ---
> > arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
> > 1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> > index 93e1eb83bed9..d1c2406ec71c 100644
> > --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> > +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> > @@ -1591,10 +1591,10 @@
> >
> > rtc_cm: rtc-cm@700 {
> > compatible = "ti,omap4-cm";
> > - reg = <0x700 0x100>;
> > + reg = <0x700 0x60>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > - ranges = <0 0x700 0x100>;
> > + ranges = <0 0x700 0x60>;
> >
> > rtc_clkctrl: rtc-clkctrl@20 {
> > compatible = "ti,clkctrl";
> > @@ -1603,6 +1603,20 @@
> > };
> > };
> >
> > + vpe_cm: vpe-cm@760 {
> > + compatible = "ti,omap4-cm";
> > + reg = <0x760 0xc>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0x760 0xc>;
> > +
> > + vpe_clkctrl: vpe-clkctrl@0 {
> > + compatible = "ti,clkctrl";
> > + reg = <0x0 0xc>;
> > + #clock-cells = <2>;
> > + };
> > + };
> > +
> > };
> >
> > &cm_core {
> > --
> > 2.17.1
> >
