Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 07/14] video: omapfb: use const pointer for fb_ops
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2] ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: [PATCH] ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-evm: Use drm simple-panel instead of tilcdc-panel
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Jyri Sarha <jsarha@xxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: Question about drm/omap: Remove panel-dpi driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: dts: am335x-sancloud-bbe: fix phy mode
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: [PATCH V5 2/3] dt-bindings: Add Logic PD Type 28 display panel
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 00/14] video, drm, etc: constify fbops in struct fb_info
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v2 07/14] video: omapfb: use const pointer for fb_ops
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH v2 00/14] video, drm, etc: constify fbops in struct fb_info
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: twl: not initialized and twl6030_uv_to_vsel problems
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v7 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• Re: [PATCH] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Ilias Apalodimas <ilias.apalodimas@xxxxxxxxxx>
• [PATCH 07/13] video: omapfb: use const pointer for fb_ops
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3: name mdio node properly
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: twl: not initialized and twl6030_uv_to_vsel problems
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] few omap dts fixes for v5.5 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] ARM: dts: omap3: name mdio node properly
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• twl: not initialized and twl6030_uv_to_vsel problems
  • From: deffo@xxxxxx
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: fix idling for suspend after disconnect interrupt
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• Re: [PATCH v3 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: am57xx-idk-common: add HDMI to the common dtsi
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/4] ARM: dts: dra76-evm: add HDMI output
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 2/4] ARM: dts: am437x-epos-evm: add HDMI support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 1/4] ARM: dts: am437x-gp-evm: add HDMI support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v3 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: Fix sgx sysconfig register for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v3 0/8] ARM/MIPS: DTS: add child nodes describing the PVRSGX GPU present in some OMAP SoC and JZ4780 (and many more)
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 1/8] dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 5/8] ARM: DTS: omap36xx: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 6/8] ARM: DTS: omap4: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 4/8] ARM: DTS: omap3: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 7/8] ARM: DTS: omap5: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 3/8] ARM: DTS: am3517: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 2/8] ARM: DTS: am33xx: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Jason Kridner <jkridner@xxxxxxxxx>
• Re: omap4 mcspi interrupts do not appear
  • From: Laurentiu-Cristian Duca <laurentiu.duca@xxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH AUTOSEL 4.19 027/219] bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 029/219] ARM: OMAP1: fix USB configuration for device-only setups
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 070/219] usb: ehci-omap: Fix deferred probe for phy handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 085/219] memory: omap-gpmc: Get the header of the enum
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 108/219] drivers/regulator: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 131/219] regulator: tps65910: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 010/127] ARM: OMAP1: fix USB configuration for device-only setups
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 32/68] drivers/regulator: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 45/68] regulator: tps65910: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 055/127] drivers/regulator: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 075/127] regulator: tps65910: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 39/91] drivers/regulator: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 56/91] regulator: tps65910: fix a missing check of return value
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 024/219] ARM: dts: Fix hsi gdd range for omap4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 024/219] ARM: dts: Fix hsi gdd range for omap4
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v7 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: omap4 mcspi interrupts do not appear
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board
  • From: "Robey, Caleb" <c-robey@xxxxxx>
• RE: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: "Robey, Caleb" <c-robey@xxxxxx>
• omap4 mcspi interrupts do not appear
  • From: Laurentiu-Cristian Duca <laurentiu.duca@xxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v2] ARM: Fix Kconfig indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Caleb Robey <c-robey@xxxxxx>
• Re: [PATCH v7 net-next 00/13] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH V2] thermal: ti-soc-thermal: Enable addition power management
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] ARM: Fix Kconfig indentation
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [GIT PULL] few ti-sysc fixes and updates for v5.5 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix cpsw mdio fck clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: Fix Kconfig indentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCHv2 00/15] Remoteproc: updates for OMAP remoteproc support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 net-next 10/13] Documentation: networking: add cpsw switchdev based driver documentation
  • From: Jakub Kicinski <jakub.kicinski@xxxxxxxxxxxxx>
• Re: [PATCH v7 net-next 07/13] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Jakub Kicinski <jakub.kicinski@xxxxxxxxxxxxx>
• [PATCH v7 net-next 00/13] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 01/13] net: ethernet: ti: ale: clean ale tbl on init and intf restart
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 04/13] net: ethernet: ti: cpsw: resolve build deps of cpsw drivers
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 03/13] net: ethernet: ti: ale: modify vlan/mdb api for switchdev
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 02/13] net: ethernet: ti: cpsw: allow untagged traffic on host port
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 05/13] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 10/13] Documentation: networking: add cpsw switchdev based driver documentation
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 07/13] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 11/13] ARM: dts: dra7: add dt nodes for new cpsw switch dev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 08/13] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 13/13] arm: omap2plus_defconfig: enable new cpsw switchdev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 12/13] ARM: dts: am571x-idk: enable for new cpsw switch dev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v7 net-next 09/13] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• RE: [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board
  • From: "Robey, Caleb" <c-robey@xxxxxx>
• Re: [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 1/1] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH 0/1] ARM: dts: am5729: beaglebone-ai: enable board
  • From: Caleb Robey <c-robey@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCHv2 00/15] Remoteproc: updates for OMAP remoteproc support
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 00/15] Remoteproc: updates for OMAP remoteproc support
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCHv2 06/15] remoteproc/omap: Initialize and assign reserved memory node
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 07/15] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 08/15] remoteproc/omap: Remove the unused fields from platform data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 09/15] remoteproc/omap: Remove the omap_rproc_reserve_cma declaration
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 12/15] remoteproc/omap: add support for system suspend/resume
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 10/15] remoteproc/omap: Check for undefined mailbox messages
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 11/15] remoteproc/omap: Request a timer(s) for remoteproc usage
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 14/15] remoteproc/omap: report device exceptions and trigger recovery
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 15/15] remoteproc/omap: add watchdog functionality for remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 13/15] remoteproc/omap: add support for runtime auto-suspend/resume
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 05/15] remoteproc/omap: Add the rproc ops .da_to_va() implementation
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 02/15] remoteproc/omap: Add device tree support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 04/15] remoteproc/omap: Add support to parse internal memories from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 03/15] remoteproc/omap: Add a sanity check for DSP boot address alignment
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2.5 01/15] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 00/15] Remoteproc: updates for OMAP remoteproc support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 4.19 297/422] ARM: dts: ti: Fix SPI and I2C bus warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: Move ti-dra7-atl.h to dt-bindigs/clock
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix cpsw mdio fck clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix cpsw mdio fck clock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Patch v4 1/3] clk: ti: dra7: add vpe clkctrl data
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: OMAP: Use ARM SMC Calling Convention when OP-TEE is available
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: dra7: fix cpsw mdio fck clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH] ARM: dts: dra7: fix cpsw mdio fck clock
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 2/2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
  • From: Faiz Abbas <faiz_abbas@xxxxxx>
• [PATCH -next v2] bus: ti-sysc: Use PTR_ERR_OR_ZERO() to simplify code
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• [PATCH -next] bus: ti-sysc: Use PTR_ERR_OR_ZERO() to simplify code
  • From: zhengbin <zhengbin13@xxxxxxxxxx>
• Re: [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFCv1 20/42] drm/omap: dsi: drop useless sync()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 41/42] ARM: dts: omap4-droid4: add panel compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 32/42] drm/omap: dsi: convert to drm_panel
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 40/42] drm/omap: dsi: support panel un/re-binding
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 23/42] drm/omap: dsi: lp/hs switching support for transfer()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 22/42] drm/omap: panel-dsi-cm: use bulk regulator API
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 30/42] drm/omap: dsi: move panel refresh function to host
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 21/42] drm/omap: dsi: use pixel-format and mode from attach
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 38/42] drm/omap: panel-dsi-cm: do not power on/off twice
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 31/42] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 42/42] drm/panel: Move OMAP's DSI command mode panel driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 24/42] drm/omap: dsi: move TE GPIO handling into core
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 25/42] drm/omap: dsi: drop custom enable_te() API
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 28/42] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 26/42] drm/omap: dsi: do bus locking in host driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 16/42] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 19/42] drm/omap: dsi: drop unused enable_te()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 37/42] drm/omap: panel-dsi-cm: fix remove()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 18/42] drm/omap: dsi: drop unused get_te()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 34/42] drm/omap: dsi: implement check timings
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 15/42] drm/omap: panel-dsi-cm: drop hardcoded VC
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 35/42] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 17/42] drm/omap: dsi: drop unused memory_read()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 39/42] drm/omap: dsi: return proper error code from dsi_update_all()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 12/42] drm/omap: dsi: introduce mipi_dsi_host
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 36/42] drm/omap: panel-dsi-cm: support unbinding
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 10/42] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 27/42] drm/omap: dsi: untangle ulps ops from enable/disable
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 07/42] drm/omap: dsi: drop virtual channel logic
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 14/42] drm/omap: dsi: request VC via mipi_dsi_attach
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 13/42] drm/omap: panel-dsi-cm: use DSI helpers
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 09/42] drm/omap: dsi: simplify read functions
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 05/42] drm/omap: panel-dsi-cm: convert to transfer API
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 08/42] drm/omap: dsi: simplify write function
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 06/42] drm/omap: dsi: unexport specific data transfer functions
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 04/42] drm/omap: dsi: add generic transfer function
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 29/42] drm/omap: dsi: do ULPS in host driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 02/42] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 03/42] drm/omap: constify write buffers
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 01/42] omap/drm: drop unused dsi.configure_pins
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [RFCv1 00/42] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [omap:droid4-pending-v5.4 16/30] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 037/237] net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 108/237] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 066/150] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 44/99] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH v3 00/12] OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCHv2 09/22] crypto: add timeout to crypto_wait_req
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCHv2 09/22] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] phy: cpcap-usb: Fix error path when no host driver is loaded
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 09/22] crypto: add timeout to crypto_wait_req
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] ARM: dts: am5729: beaglebone-ai: dra7 reqs in dts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH 1/2] ARM: dts: am5729: beaglebone-ai: dra7 reqs in dts
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH 0/2] ARM: dts: am5729: beaglebone-ai: Enable BeagleBone AI
  • From: Caleb Robey <c-robey@xxxxxx>
• Re: [PATCH] bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH 0/2] ARM: dts: am5729: beaglebone-ai: Enable BeagleBone AI
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH 1/2] ARM: dts: am5729: beaglebone-ai: dra7 reqs in dts
  • From: Caleb Robey <c-robey@xxxxxx>
• Re: [PATCH] ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-torpedo-baseboard: Enable HDQ
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: clock: Move ti-dra7-atl.h to dt-bindigs/clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: dra7-atl: Remove pm_runtime_irq_safe()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [uL PATCH 1/2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [uL PATCH 2/2] ARM: dts: am5729: beaglebone-ai: dra7 reqs in dts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 00/12] OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 00/12] OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 02/12] net: wireless: ti: wl1251 add device tree support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 01/12] Documentation: dt: wireless: update wl1251 for sdio
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] bus: ti-sysc: Add module enable quirk for audio AESS
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] dt-bindings: clock: Move ti-dra7-atl.h to dt-bindigs/clock
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [PATCH] clk: ti: dra7-atl: Remove pm_runtime_irq_safe()
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• [uL PATCH 2/2] ARM: dts: am5729: beaglebone-ai: dra7 reqs in dts
  • From: Caleb Robey <c-robey@xxxxxx>
• [uL PATCH 1/2] ARM: dts: am5729: beaglebone-ai: adding device tree
  • From: Caleb Robey <c-robey@xxxxxx>
• [uL PATCH 0/2] Enable BeagleBone AI
  • From: Caleb Robey <c-robey@xxxxxx>
• [PATCH] ARM: OMAP2+: Drop useless gptimer option for omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] bus: ti-sysc: Add module enable quirk for audio AESS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 01/12] Documentation: dt: wireless: update wl1251 for sdio
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 08/17] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH AUTOSEL 4.19 003/209] ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 004/209] ARM: dts: omap5: enable OTG role for DWC3 controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 116/209] i2c: omap: use core to detect 'no zero length' quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 202/209] ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 003/115] ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 004/115] ARM: dts: omap5: enable OTG role for DWC3 controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 112/115] ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/68] ARM: dts: omap5: enable OTG role for DWC3 controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 02/48] ARM: dts: omap5: enable OTG role for DWC3 controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 48/48] ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 68/68] ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v6 net-next 02/13] net: ethernet: ti: cpsw: allow untagged traffic on host port
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Applied "spi: Fix regression to return zero on success instead of positive value" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 08/17] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 13/17] remoteproc/omap: add support for system suspend/resume
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [GIT PULL 3/3] update maintainers file paths
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 2/3] few more soc changes for omaps for v5.5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL 1/3] few more dts changes for omaps for v5.5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo-baseboard: Enable HDQ
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v2 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v4 1/3] clk: ti: dra7: add vpe clkctrl data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v4 2/3] ARM: dts: dra7: add vpe clkctrl node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Patch v2 2/3] ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 3/3] ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 0/3] ARM: dts: am43x-vpfe/ov2659.patch
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 02/10] ARM: dts: dra7: add cam clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 05/10] ARM: dts: DRA72: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 07/10] arm: dtsi: dra76x: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 09/10] arm64: dts: k3-am65-main Add CAL node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 01/10] clk: ti: dra7: add cam clkctrl data
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 00/10] ARM: dts: dra7: add cal nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v4 1/3] clk: ti: dra7: add vpe clkctrl data
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v4 0/3] ARM: dts: dra7: add vpe nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v4 2/3] ARM: dts: dra7: add vpe clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v4 3/3] ARM: dts: dra7: Add ti-sysc node for VPE
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH] base: soc: Export soc_device_to_device() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Sense of soc bus? (was: [PATCH] base: soc: Export soc_device_to_device() helper)
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 15/17] remoteproc/omap: report device exceptions and trigger recovery
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 13/17] remoteproc/omap: add support for system suspend/resume
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 12/17] remoteproc/omap: Request a timer(s) for remoteproc usage
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 11/17] remoteproc/omap: Check for undefined mailbox messages
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 08/17] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 06/17] remoteproc/omap: Add the rproc ops .da_to_va() implementation
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 05/17] remoteproc/omap: Add support to parse internal memories from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 02/17] remoteproc/omap: Switch to SPDX license identifiers
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 03/17] remoteproc/omap: Add device tree support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH] base: soc: Export soc_device_to_device() helper
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 17/17] remoteproc/omap: fix auto-suspend failure warning during crashed state
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 15/17] remoteproc/omap: report device exceptions and trigger recovery
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 13/17] remoteproc/omap: add support for system suspend/resume
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] base: soc: Export soc_device_to_device() helper
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/17] remoteproc/omap: Request a timer(s) for remoteproc usage
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] base: soc: Export soc_device_to_device() helper
  • From: Andreas Färber <afaerber@xxxxxxx>
• Re: [PATCH 11/17] remoteproc/omap: Check for undefined mailbox messages
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 10/17] remoteproc/omap: Remove the omap_rproc_reserve_cma declaration
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 09/17] remoteproc/omap: Remove the unused fields from platform data
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 08/17] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 07/17] remoteproc/omap: Initialize and assign reserved memory node
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 06/17] remoteproc/omap: Add the rproc ops .da_to_va() implementation
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 05/17] remoteproc/omap: Add support to parse internal memories from DT
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 04/17] remoteproc/omap: Add a sanity check for DSP boot address alignment
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 03/17] remoteproc/omap: Add device tree support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] ARM: dts: logicpd-torpedo: Disable USB Host
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2: fixup doc comments in omap_device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2: remove unused wakeup_cpu
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] base: soc: Export soc_device_to_device() helper
  • From: Andreas Färber <afaerber@xxxxxxx>
• [PATCH] spi: Fix regression to return zero on success instead of positive value
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Applied "spi: omap2-mcspi: Remove redundant checks" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] mfd: ti_am335x_tscadc: Fix static checker warning
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [BACKPORT 4.14.y 04/18] usb: dwc3: Allow disabling of metastability workaround
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 063/191] ARM: dts: ti: Fix SPI and I2C bus warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 062/191] ARM: dts: am335x-evm: fix number of cpsw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 18/66] ARM: dts: am335x-evm: fix number of cpsw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 15/40] ARM: dts: am335x-evm: fix number of cpsw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 030/109] ARM: dts: am335x-evm: fix number of cpsw
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v4 05/29] crypto: omap - switch to skcipher API
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH] ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v6 net-next 07/13] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 10/13] Documentation: networking: add cpsw switchdev based driver documentation
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 11/13] ARM: dts: dra7: add dt nodes for new cpsw switch dev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 13/13] arm: omap2plus_defconfig: enable new cpsw switchdev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 12/13] ARM: dts: am571x-idk: enable for new cpsw switch dev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 08/13] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 09/13] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 06/13] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 05/13] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 04/13] net: ethernet: ti: cpsw: resolve build deps of cpsw drivers
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 03/13] net: ethernet: ti: ale: modify vlan/mdb api for switchdev
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 00/12] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 02/13] net: ethernet: ti: cpsw: allow untagged traffic on host port
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 01/13] net: ethernet: ti: ale: clean ale tbl on init and intf restart
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v6 net-next 00/13] net: ethernet: ti: introduce new cpsw switchdev based driver
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] clk: ti: dra7: fix parent for gmac_clkctrl
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] mfd: ti_am335x_tscadc: Fix static checker warning
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: omap2-mcspi: Remove redundant checks
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH 02/17] remoteproc/omap: Switch to SPDX license identifiers
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Kitt <steve@xxxxxxx>
• [PATCH] ARM: dts: Configure interconnect target module for am437x sgx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH V2] thermal: ti-soc-thermal: Enable addition power management
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] OMAP3: convert opp-v1 to opp-v2 and read speed binned / 720MHz grade bits
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH] thermal: ti-soc-thermal: Enable addition power management
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 1/2] configs: ARM: omap2plus: Enable OMAP3_THERMAL
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH 5.3 030/140] ARM: dts: am3874-iceboard: Fix i2c-mux-idle-disconnect usage
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/12] omap: remove omap2_hsmmc_info in old hsmmc.[ch] and update Makefile
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 06/12] omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 05/12] omap: pdata-quirks: revert pandora specific gpiod additions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 03/12] ARM: dts: pandora-common: define wl1251 as child node of mmc3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [GIT PULL] clk: ti: changes for 5.5 (take 2)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] clk/ti/adpll: allocate room for terminating null
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [Patch v2 02/10] ARM: dts: dra7: add cam clkctrl node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Minimal patch against TI AM335x UART swallowing the first byte using the 8250_omap driver in RS485 mode
  • From: Marek Vasut <marex@xxxxxxx>
• Minimal patch against TI AM335x UART swallowing the first byte using the 8250_omap driver in RS485 mode
  • From: Falco Hyfing <hyfinglists@xxxxxxxxx>
• [PATCH] ARM: dts: logicpd-torpedo: Disable USB Host
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] fbdev/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH] fbdev/omap: fix max fclk divider for omap36xx
  • From: Adam Ford <aford173@xxxxxxxxx>
• [PATCH AUTOSEL 4.19 106/205] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 107/205] ARM: dts: omap3-gta04: fixes for tvout / venc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 111/205] ARM: dts: omap3-gta04: keep vpll2 always on
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 108/205] ARM: dts: omap3-gta04: tvout: enable as display1 alias
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 109/205] ARM: dts: omap3-gta04: fix touchscreen tsc2007
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 110/205] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 049/103] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 052/103] ARM: dts: omap3-gta04: fix touchscreen tsc2007
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 053/103] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 054/103] ARM: dts: omap3-gta04: keep vpll2 always on
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 051/103] ARM: dts: omap3-gta04: tvout: enable as display1 alias
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 050/103] ARM: dts: omap3-gta04: fixes for tvout / venc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 28/64] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 30/64] ARM: dts: omap3-gta04: tvout: enable as display1 alias
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 32/64] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 31/64] ARM: dts: omap3-gta04: fix touchscreen tsc2007
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 33/64] ARM: dts: omap3-gta04: keep vpll2 always on
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 20/44] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 21/44] ARM: dts: omap3-gta04: tvout: enable as display1 alias
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 23/44] ARM: dts: omap3-gta04: keep vpll2 always on
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 22/44] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 29/64] ARM: dts: omap3-gta04: fixes for tvout / venc
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCHv2 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v2 2/8] ARM: DTS: am33xx: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 4/8] ARM: DTS: omap3: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 1/8] RFC: dt-bindings: add img,pvrsgx.yaml for Imagination GPUs
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 5/8] ARM: DTS: omap36xx: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 0/8] ARM/MIPS: DTS: add child nodes describing the PVRSGX present in some OMAP SoC and JZ4780
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 6/8] ARM: DTS: omap4: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 8/8] MIPS: DTS: jz4780: add sgx gpu node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 7/8] ARM: DTS: omap5: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2 3/8] ARM: DTS: am3517: add sgx gpu child node
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 11/12] net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 04/12] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 09/12] mmc: sdio: fix wl1251 vendor id
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 08/12] mmc: host: omap-hsmmc: remove init_card pdata callback from pdata
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 06/12] omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 12/12] net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 07/12] omap: remove omap2_hsmmc_info in old hsmmc.[ch] and update Makefile
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 00/12] OpenPandora: make wl1251 connected to mmc3 sdio port of OpenPandora work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 10/12] mmc: core: fix wl1251 sdio quirks
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 05/12] omap: pdata-quirks: revert pandora specific gpiod additions
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 02/12] net: wireless: ti: wl1251 add device tree support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 03/12] ARM: dts: pandora-common: define wl1251 as child node of mmc3
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 01/12] Documentation: dt: wireless: update wl1251 for sdio
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v1 7/7] dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• [Patch v3 0/5] ARM: dts: dra7: add vpe nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 4/5] ARM: dts: dra7: Add ti-sysc node for VPE
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 5/5] media: ti-vpe: vpe: fix compatible to match bindings
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 2/5] clk: ti: dra7: add vpe clkctrl data
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 3/5] ARM: dts: dra7: add vpe clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v3 1/5] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Benoit Parrot <bparrot@xxxxxx>
• [PATCH] bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Long Delay on startup of wl18xx Wireless chip
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH] OMAP2: remove unused wakeup_cpu
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH] OMAP2: fixup doc comments in omap_device
  • From: "Ben Dooks (Codethink)" <ben.dooks@xxxxxxxxxxxxxxx>
• Re: Long Delay on startup of wl18xx Wireless chip
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Long Delay on startup of wl18xx Wireless chip
  • From: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Patch v2 1/5] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Long Delay on startup of wl18xx Wireless chip
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: Long Delay on startup of wl18xx Wireless chip
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH 09/10] crypto: add timeout to crypto_wait_req
  • From: Eric Biggers <ebiggers@xxxxxxxxxx>
• [PATCHv2 22/22] crypto: omap-crypto: copy the temporary data to output buffer properly
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 21/22] crypto: omap-des: handle NULL cipher request
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 20/22] crypto: omap-des: avoid unnecessary spam with bad cryptlen
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 19/22] crypto: omap-aes-gcm: convert to use crypto engine
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 18/22] crypto: omap-sham: fix unaligned sg list handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 17/22] crypto: omap-aes-gcm: fix failure with assocdata only
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 16/22] crypto: omap-aes-gcm - use the AES library to encrypt the tag
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 14/22] crypto: omap-aes-gcm - add missing .setauthsize hooks
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 15/22] crypto: omap-aes-gcm - check length of assocdata in RFC4106 mode
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 13/22] crypto: omap-aes-gcm - deal with memory allocation failure
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 12/22] crypto: omap-aes-ctr - set blocksize to 1
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 11/22] crypto: omap-aes - reject invalid input sizes for block modes
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 09/22] crypto: add timeout to crypto_wait_req
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 10/22] crypto: omap-aes: fixup aligned data cleanup
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 08/22] crypto: omap-sham: fix split update cases with cryptomgr tests
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 06/22] crypto: omap-sham: fix buffer handling for split test cases
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 05/22] crypto: omap-aes: add IV output handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 07/22] crypto: omap-aes-gcm: fix corner case with only auth data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 04/22] crypto: omap-des: add IV output handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 02/22] crypto: omap-sham: remove the sysfs group during driver removal
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 03/22] crypto: omap-aes: remove the sysfs group during driver removal
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 01/22] crypto: omap-sham: split up data to multiple sg elements with huge data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv2 00/22] crypto: omap-sham: fixes towards 5.5
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/6] crypto: additional fixes for omap-aes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/6] crypto: omap: fix extra tests with crypto manager
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH v3 05/29] crypto: omap - switch to skcipher API
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• Re: [PATCH 0/6] crypto: omap: fix extra tests with crypto manager
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] crypto: additional fixes for omap-aes
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] crypto: omap-des: avoid unnecessary spam with bad cryptlen
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 6/6] crypto: omap-crypto: copy the temporary data to output buffer properly
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 5/6] crypto: omap-des: handle NULL cipher request
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 3/6] crypto: omap-aes-gcm: convert to use crypto engine
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 2/6] crypto: omap-sham: fix unaligned sg list handling
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 1/6] crypto: omap-aes-gcm: fix failure with assocdata only
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 0/6] crypto: omap: fix extra tests with crypto manager
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/6] crypto: additional fixes for omap-aes
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 28/62] gpio: gpio-omap: Use new GPIO_LINE_DIRECTION
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH 28/62] gpio: gpio-omap: Use new GPIO_LINE_DIRECTION
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [GIT PULL] clk: ti: changes for 5.5 (take 2)
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH -next] thermal: ti-soc-thermal: Remove dev_err() on platform_get_irq() failure
  • From: Keerthy <j-keerthy@xxxxxx>
• [Patch v2 02/10] ARM: dts: dra7: add cam clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 01/10] clk: ti: dra7: add cam clkctrl data
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 09/10] arm64: dts: k3-am65-main Add CAL node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 07/10] arm: dtsi: dra76x: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 05/10] ARM: dts: DRA72: Add CAL dtsi node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 00/10] ARM: dts: dra7: add cal nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 2/5] clk: ti: dra7: add vpe clkctrl data
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 5/5] media: ti-vpe: vpe: fix compatible to match bindings
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 4/5] ARM: dts: dra7: Add ti-sysc node for VPE
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 0/5] ARM: dts: dra7: add vpe nodes
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node
  • From: Benoit Parrot <bparrot@xxxxxx>
• [Patch v2 1/5] dt-bindings: media: ti-vpe: Document VPE driver
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH] clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH v2] clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [omap_hsmmc] run into dead loop
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v1 7/7] dt-bindings: PCI: Use IRQ flags for legacy PCI IRQ interrupts
  • From: Andrew Murray <andrew.murray@xxxxxxx>
• [PATCH v1 0/7] PCI: dt: Remove magic numbers for legacy PCI IRQ interrupts
  • From: Andrew Murray <andrew.murray@xxxxxxx>
• [PATCH -next] thermal: ti-soc-thermal: Remove dev_err() on platform_get_irq() failure
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v5 net-next 04/12] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH] ARM: dts: Configure sgx for dra7
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clk: ti: add clkctrl data dra7 sgx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT PULL] prm reset control dts changes for omaps for v5.5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] DTS: ARM: pandora-common: define wl1251 as child node of mmc3
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [Patch 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Patch 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [GIT PULL] clk: ti: fixes for v5.4
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [GIT PULL] clk: ti: changes for 5.5
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCHv4 03/12] clk: ti: clkctrl: add new exported API for checking standby info
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCHv3 03/10] clk: ti: clkctrl: add new exported API for checking standby info
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [Patch 1/3] ARM: dts: am43xx: add support for clkout1 clock
  • From: Benoit Parrot <bparrot@xxxxxx>
• Re: [PATCH v2 03/11] DTS: ARM: pandora-common: define wl1251 as child node of mmc3
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] DTS: ARM: pandora-common: define wl1251 as child node of mmc3
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpu: pvrsgx: add initial bindings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpu: pvrsgx: add initial bindings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 33/81] ARM: dts: Use level interrupt for omap4 & 5 wlcore
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 30/81] ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH V5 1/3] drm/panel: simple: Add Logic PD Type 28 display support
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [RFC v2 1/2] ARM: dts: omap3: Add cpu trips and cooling map for omap3 family
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [omap:droid4-pending-v5.4 18/26] include/linux/mfd/motorola-mdm.h:37:25: error: field 'gsm_dlci' has incomplete type
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-v5.4 16/26] include/linux/serdev-gsm.h:29:2: error: unknown type name 'atomic_t'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap:droid4-pending-v5.4 16/26] include/linux/serdev-gsm.h:62:33: error: implicit declaration of function 'to_serdev_device'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [omap_hsmmc] run into dead loop
  • From: Yi Zheng <goodmenzy@xxxxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCHv3 00/10] clk: ti: remoteproc / iommu support patches
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCHv3 03/10] clk: ti: clkctrl: add new exported API for checking standby info
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 0/4] clk: ti: re-work divider clock support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/17] remoteproc/omap: Switch to SPDX license identifiers
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 04/17] remoteproc/omap: Add a sanity check for DSP boot address alignment
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 03/17] remoteproc/omap: Add device tree support
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 05/17] remoteproc/omap: Add support to parse internal memories from DT
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 06/17] remoteproc/omap: Add the rproc ops .da_to_va() implementation
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 07/17] remoteproc/omap: Initialize and assign reserved memory node
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 08/17] remoteproc/omap: Add support for DRA7xx remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 10/17] remoteproc/omap: Remove the omap_rproc_reserve_cma declaration
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 11/17] remoteproc/omap: Check for undefined mailbox messages
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 12/17] remoteproc/omap: Request a timer(s) for remoteproc usage
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 13/17] remoteproc/omap: add support for system suspend/resume
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 17/17] remoteproc/omap: fix auto-suspend failure warning during crashed state
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 16/17] remoteproc/omap: add watchdog functionality for remote processors
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 15/17] remoteproc/omap: report device exceptions and trigger recovery
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 14/17] remoteproc/omap: add support for runtime auto-suspend/resume
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 09/17] remoteproc/omap: Remove the unused fields from platform data
  • From: Tero Kristo <t-kristo@xxxxxx>
• [PATCH 00/17] remoteproc: omap changes on top of v5.4-rc1
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/4] clk: ti: re-work divider clock support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/4] clk: ti: re-work divider clock support
  • From: Tero Kristo <t-kristo@xxxxxx>
• Re: [PATCH 0/4] clk: ti: re-work divider clock support
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [RFC PATCH] net: ethernet: ti: cpsw_port_offload_fwd_mark_update() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 net-next 07/12] net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] net: ethernet: ti: cpsw: cpsw_ale_set_vlan_untag() can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 net-next 01/12] net: ethernet: ti: cpsw: allow untagged traffic on host port
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 net-next 06/12] net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 00/10] crypto: omap fixes towards 5.5
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH 07/10] crypto: omap-aes-gcm: fix corner case with only auth data
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH 6/6] crypto: omap-aes-gcm - use the AES library to encrypt the tag
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 5/6] crypto: omap-aes-gcm - check length of assocdata in RFC4106 mode
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 4/6] crypto: omap-aes-gcm - add missing .setauthsize hooks
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 3/6] crypto: omap-aes-gcm - deal with memory allocation failure
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 2/6] crypto: omap-aes-ctr - set blocksize to 1
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 1/6] crypto: omap-aes - reject invalid input sizes for block modes
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH 0/6] crypto: additional fixes for omap-aes
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• Re: [PATCH v2 01/11] Documentation: dt: wireless: update wl1251 for sdio
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: Configure omap3 rng
  • From: Adam Ford <aford173@xxxxxxxxx>
• Re: [PATCH v2 01/11] Documentation: dt: wireless: update wl1251 for sdio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 net-next 05/12] dt-bindings: net: ti: add new cpsw switch driver bindings
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>